|
They finally admit they received the funds, and claims that funds will be available within 24 hrs. This is the 3rd time they said this.
And of course, 24hrs went by, and still no money
|
|
|
|
|
there's no 8 pin molex connector.....
|
|
|
|
I have a TON of powered and unpowered risers. 1x or 16x. Let me know if you need them. https://forum.litecoin.net/index.php/topic,2463.0.htmlMy issue with cablesaurus is, with that kind of lead time, they are basically taking your money, and then ordering it from china at the same moment. |
|
|
|
|
I have 6GPUs running on Win7 x64, 13.1 driver. No issues.
5x 7950, and one APU. Point is, the total number of GPU in GPU-Z is 6.
|
|
|
|
1) Gigabyte 7950 3GB GDDR5 windforce $290
This card is Undervolted @ 1.09V (switch 2) It has not been used for more than an hour.
It was simply taken out of the box, voltage modified, tested and was put back in it's original box.
Voltage modified by flashing BIOS or hardware mod? BIOS mod. |
|
|
|
|
if you don't know what is retail, i don't really think you should be mining.
|
|
|
|
|
And if you are overclocking... you are more likely to need powered risers.
|
|
|
|
|
it is best if you post your config....
|
|
|
|
Yep that's normal.
1,200W is the amount of wattage the PSU can supply to the computer.
An 80Plus Gold PSU will be ~87% efficient at 100% load, according to the specification.
This means that for ever 1 watt you pull from the wall (which is what your Kill-A-watt is measuring), you will supply 0.87W to the computer.
A 1200W PSU supplying 1,200W to the computer will pull ~1,380W (1200/0.87) from the wall.
If you're drawing 1,300W, your 5 card rig is really only drawing 1,131W (1300*0.87).
no i am running a 5 card rig but I have only 3 cards running off of this PSU. The other two cards are ru nning off of a different PSU. I have read what others are drawing running 7950s and this seems very very high. i have read a few people running 3 cards off of 800W PSUs. these 7950s should only draw about 200W percard when mining right? You probably screwed up the connection in bridging the PSUs. Since your single PSU can handle it, why not go buy some SATA/molex adapters and just run everything off the silverstone? never ever use SATA adapters. |
|
|
|
I wired $500 to OKpay to put into an exchange. The total cost was $75.
It costed a flat fee of $50 from the bank. OKpay charged a fee and reduced $500 to $485. Transferred $485 into btce, that amount is reduced roughly to $475.
So starting at $550 ($500 + $50 fee), ended up with $475. Three ways to look at the cost, choose the number that makes you feel sad the least: a $75 fee, or a loss of 8.64% of the starting amount, or 15.8% cost to deposit $475.
Why are you tagged as a scammer?
That high % of fees is if you are wiring a small amount, and $500 is a small amount. Most of those fees are flat rate. I wired $5000, and paid $45 for the transfer on top of that. The receiving bank should have gotten $5000, but OKPAY claims that they only received $4780. There is no way the fee at the receiving end is $220. And if it is, they should KNOW how much their bank charges. OKPAY is unwilling to tell me how much is the fee on their bank. They cite is can be due to banks in between that charged the fees. According to my bank, there is no 3rd or 4th bank involved. The funds went straight to the receiving bank. Got a message from OKPAY support, and again, they simply say to upload my transfer confirmation, which I did upload on the first support post, and since then have uploaded it again. |
|
|
|
Since your going with the AMD fpu already...you might think about upgrading to the a10-5800k. For about 50 bucks more you can get that and have it hashing at 7760 speeds. Also I have had real good luck with the biostar x85 board. Check out the differences between the gigabyte and biostar PCIe layout. Gigabyte makes good products...but.
I have never had good luck overclocking with them. Rock solid stock but any tweaking seems to go south in a hurry with that brand. YMMV. gl
zif
how fast does 7760 hashes at? Or specifically, in 5800k, how fast can it hash? |
|
|
|
Why hasn't anyone tried this yet? I mean there are plenty of men with duff jizz/lesbians wanting an unholy fraud of a 'family'. So why hasn't anyone offered BTC for spooge? And if they did what would be a good price for baby gravy/spunk/jizz/man juice/splodge?
Personally, I wouldn't due to a sense of responsibilty.
It is literally harder (no pun intended) to be a viable sperm donor than it is to get into Harvard. Good luck. LOL... i had to read that twice to get the no pun intended part. |
|
|
|
I see its up again , Pool speed 527Mh/s.
glad the pool speed is finally dropping hard. |
|
|
|
Hey, I have 3x7950 ( http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=7542562&CatId=7387) and been running at 74-80C each and 80% of fan. Which is better for the card? should i crank up the fan to 90%, 100%? to keep the cards cooler? or should i let the temp go to 80C-85C and keep the fan at 60%, 70%? What would be your recommendations for the card temperature and the RPMs? On the hot day(rig is in garage) it's 80C for all cards at 80% fan, should i crank up the fan? or it's ok to be at 80C? I'm kind of looking answer to my specific case, but in the same way would be good to know which makes more sense in general. Thanks put a fan that blows directly at the rig |
|
|
|
""Okay so you're not a scammer, but what about that pirate bet? Aren't you a deadbeat who doesn't pay loans or debts?" Well, as it says above, I have settled with almost everyone now and the progress on that can be viewed at https://bitcointalk.org/index.php?topic=140654 and any loans I've ever taken out in the bitcoin community are either paid or being paid regularly." I do not see my name on that list, and you owed me 5000BTC |
|
|
|
Why not buy a new 7950 instead of paying $40 more for something that's used?
B/c this is $40 cheaper??? |
|
|
|
I dealt with him prior to his scammer tag for some 5830's and everything went smoothly. I don't know all the details of his earning a scammer tag, however.
I actually regretted selling you those 5830s!! I am sure you got more than enough back mining BTC. |
|
|
|
Got pictures, accept escrow?
i accept escrow. no pictures, been too busy mining... i can email you the newegg invoice to show i bought it. |
|
|
|
Have you been back to the bank you wired it from and got any transaction details from them?
Yes, I went back to the bank, and they confirmed that the $5000 was received by the other bank. It has been over 1 month, and OKPAY is playing the tactic where they hope I would just give up on it. Their last response took 1 week, and they said they received the money. But I still see no money in my account. It will be another week or 2 before they would reply again. |
|
|
|
|
Show Posts
