juggalodarkclow is purchasing the last card for $530.69 including Paypal fees. I will be sending the card first given juggalodarkclow solid reputation, payment will be due upon receipt.
|
|
|
Well it looks like I'm just going to be keeping these unless I get at least $11,000 for them. These will mine for months after the others are too pricey cuz of electricity. I best call out the power guy I guess and run a bunch of 220! Good luck to you. Thanks. The hardest part so far was telling the guys I need normal plugs for the 220. In the USA we use these crazy large plugs for 220 most of the time. The hardest problem is getting an electrician to side step the NEC if you want to change things up like that.. A licensed electrician can lose his license for violations like the one you are asking him to commit.
|
|
|
Ok I helped all you guys out, see if you can assist. I just added a 4th module to make a Jupiter and of course with my luck it has a Dead Die 0 I am overclocked to 231 As soon as I try 241 or 251 dies start getting shut down due to HW errors. As you can see I have the temperature covered. Whats your suggestion on settings? What should I adjust in advanced? This is a October Saturn/Jupiter with 4 VRMs Thanks for any suggestions http://imgur.com/BF0VeQTI have done the same with one of my older units.. With the voltage control on the dies I bumped everything to about -0.0860 volts to keep it stable and keep the dies alive... I did have a troublesome die that simply would need a lower OC than the 241 I am running on most so I would drop it to 211 to keep it stable..
|
|
|
They are supposedly shipping tomorrow... I would guess that they could be delayed till monday shipping. And yes my friend, it seems china is undercutting your hardware. They gotta be shipping around 500 th every two weeks now.
So I can order 10,000 units tomorrow? There has to be some delay other than shipping times. Also anyone have any of these in hand or are they so far a vapor product? I'm not trying to defend anyone that is pushing the Ant comparison as there is a number of factors to consider when comparing them to a Cointerra unit but look at the threads in goods with hundreds of pages of replies, yes they have been shipping, and are shipping by the hundreds each week. This is most likely one of the regular contributors to the ongoing increase in hashrate, and the earlier comments on price are correct. I know in the US when I order I will receive in 3 business days, they are shipping right now from Bitmain
|
|
|
I have a LEPA G1600 I used with mine and have had no issues.. Have the basic CHinese risers with a capacitor on them. You can smoke the capacitor if you plug the riser in backwards. Both the LEPA connectors and the riser connector should be keyed but I know from experience if you don't pay attention and force it the capacitor will smoke..
|
|
|
I can't for the life of me understand why you would leave years of mining revenue with 50BTC or any pool for that matter.. That said how long have you given them to respond to any requests to correct the issue?
|
|
|
Can we put as settings 221 or only 231 211? Yes you can.. I don't have easy access to the post but a number if times earlier in the thread a table with a more comprehensive list of numbers with associated clock rates was published. Last one was perhaps 2-4 pages back.
|
|
|
Very nice watch.. Seriously thinking about it..
|
|
|
I may be late to the party but others are saying they get them quicker ordering right from the source, not to mention it is a little bit less expensive (1.45 BTC), what value add are you providing?
|
|
|
No bids yet
Did you miss my opening bid last night at 1.0 BTC? It's further up in your thread..
|
|
|
Wow that's way overpriced for 100Gh/s and 3MH/s. until the other manufacturers get theirs on the market, it seems this is the only game in town for these devices. he sets his price and people will pay. im sure someone is buying them. I just want to know if they work as advertised. There are others on the market too, this is too expensive. I just bought one much cheaper (19GHh/s) also from China, but it is not easy to get them. However, for thos who want them fast this is a choice... Would you share? I cannot find anyone else offering them as of yet..
|
|
|
What is your buyout price? If I want to secure it right away.
Of course he might have multiple people waiting for that price, good luck
|
|
|
Any chance you will start to accept Dwolla? I don't think it is any more risky than bank transfers that can be reversed within 60 days.
I suppose the answer differs depending on the country but I am quite surprised in any country a bank transfer (wire transfer/SEPA I assume) can be reversed after 60 days. In the US they cannot be reversed for any reason and I suspect the EU is similar, or at worst allows a reversal for a very small period of time.
|
|
|
Want to make sure I am reading this right, auction ends at 11PM GMT or 11PM GMT - 6 (putting it in CST in the US)
|
|
|
Kicking off the bidding at 1 BTC..
|
|
|
I'll kick off the bidding 1.6 BTC for the whole lot (.2 BTC each).. Starting low so there is room to grow
|
|
|
I'll kick off bidding at 1.0 BTC
|
|
|
At what point did KNC's "Q1/Q2" ship date become, either implicitly or explicitly, a Q2 shipdate.
He said 'KNC said', i haven't seen them say anything on their website nor via email in quite a while now
When Orama explicitly said they were still in the design phase for the chip, and it was later state 'early design phase'. This removes Q1 as a possibility simply due to the reality of design->test->verification->foundry->packaging->KNC This was discussed several pages back. I'm not trying to be an asshole but that does not mean "KNC said" as was stated earlier.. It's may or may not be logical based on where they are but it's not a statement they ever made, state the facts as they are..
|
|
|
|