[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[wolfen]

Is there a way to use awesome miner with ethos ethminer? Do I need to enable api?

[toptek]

Is there a way to use awesome miner with ethos ethminer? Do I need to enable api?

you have to use AM as a monitor and use any of the miners ethOS offers but that miner has to offer some kind of API access and set up AM as a network miner, i use Ethos and monitor two rigs using CM 12.4 as the miner . I don't think you can set up a managed miner in Linux with AM it only runs with windows in remote or as the main controller, you may be able to run it in Linux with boot camp, i think it's called can't say,I  never used that and don't care to .....I only use Ethos because it is more stable then windows and not because of AM ..


The same thing should work if your are using the free version of  ethos  the miner has to allow some form of API access or it won't work or use the Generic miner way in AM if it doesn't  but that doesn't  do much but let you see what the miner is doing with  AM ... if that's all you need you set  that up with managed miner but it is very very limited in what it does but you can see the miner or GPUs .I'M not sure if that works with Linux only tried it with windows..

[apederzoli]

Hello,
is there a guide or could anyone help me to add spoondolies miners to awesome miner?
Thanks

[patrike]

Hello,
is there a guide or could anyone help me to add spoondolies miners to awesome miner?
Thanks

Hi,
If it's only a one or very few of them and you already know their IP addresses, you can use the Add Miner Wizard according to this guide to add them:
http://www.awesomeminer.com/help/externalwizard.aspx

If there are many, I recommend the same Wizard, but instead selecting "External Miner - Network Scan", where Awesome Miner will try to find all the miners on the network and add them.

[apederzoli]

Thanks for the reply.
I know the ip address, however the program doesn't seem to find them.
It shows them as offline

[patrike]

Thanks for the reply.
I know the ip address, however the program doesn't seem to find them.
It shows them as offline

Do you know if the API is enabled on the devices, to allow external applications like Awesome Miner to connect?
It looks like there are some steps required according to this thread: https://bitcointalk.org/index.php?topic=810891.msg9083903#msg9083903

[xleejohnx]

Awesome Miner verison 2.4.1 has been released:
- Added rule trigger for Ping timeout
- Display miner API response time on summary tab
- Claymore's Zcash Miner 12.4 and Claymore's Ethereum Miner 8.1
- Corrections to Managed Template implementation and connection stability

would it possible to get optiminer zec put into the list
it has a monitoring port that can be set at 3333 just like claymore
would be nice if this could be done!!!
keep up the good work! love this program

[patrike]

Awesome Miner verison 2.4.1 has been released:
- Added rule trigger for Ping timeout
- Display miner API response time on summary tab
- Claymore's Zcash Miner 12.4 and Claymore's Ethereum Miner 8.1
- Corrections to Managed Template implementation and connection stability

would it possible to get optiminer zec put into the list
it has a monitoring port that can be set at 3333 just like claymore
would be nice if this could be done!!!
keep up the good work! love this program

Have you verified if the API is identical? Can you try to add an External Miner that is pointing to this port, and specify the type as Claymore's Zcash Miner?

[xleejohnx]

Awesome Miner verison 2.4.1 has been released:
- Added rule trigger for Ping timeout
- Display miner API response time on summary tab
- Claymore's Zcash Miner 12.4 and Claymore's Ethereum Miner 8.1
- Corrections to Managed Template implementation and connection stability

would it possible to get optiminer zec put into the list
it has a monitoring port that can be set at 3333 just like claymore
would be nice if this could be done!!!
keep up the good work! love this program

Have you verified if the API is identical? Can you try to add an External Miner that is pointing to this port, and specify the type as Claymore's Zcash Miner?

the api is different.
this is optiminer

Code:

{
   "iteration_rate" : {
      "GPU0" : {
         "3600s" : 135.39444444444445,
         "5s" : 136,
         "60s" : 135.75
      },
      "GPU1" : {
         "3600s" : 138.97222222222223,
         "5s" : 138,
         "60s" : 138.91666666666666
      },
      "GPU2" : {
         "3600s" : 140.15416666666667,
         "5s" : 140,
         "60s" : 139.91666666666666
      },
      "GPU3" : {
         "3600s" : 139.47083333333333,
         "5s" : 140,
         "60s" : 139.5
      },
      "GPU4" : {
         "3600s" : 139.31666666666666,
         "5s" : 138,
         "60s" : 139.33333333333334
      },
      "Total" : {
         "3600s" : 693.30972222222226,
         "5s" : 695,
         "60s" : 693.25
      }
   },
   "os" : "linux",
   "share" : {
      "accepted" : 11591,
      "rejected" : 29
   },
   "solution_rate" : {
      "GPU0" : {
         "3600s" : 254.52416666666667,
         "5s" : 258.39999999999998,
         "60s" : 256.81666666666666
      },
      "GPU1" : {
         "3600s" : 260.54722222222222,
         "5s" : 265.19999999999999,
         "60s" : 263.78333333333336
      },
      "GPU2" : {
         "3600s" : 263.30333333333334,
         "5s" : 278.80000000000001,
         "60s" : 264.5
      },
      "GPU3" : {
         "3600s" : 261.95833333333331,
         "5s" : 274.60000000000002,
         "60s" : 265.36666666666667
      },
      "GPU4" : {
         "3600s" : 260.98305555555555,
         "5s" : 260,
         "60s" : 260.31666666666666
      },
      "Total" : {
         "3600s" : 1301.3116666666667,
         "5s" : 1344.2,
         "60s" : 1310.1666666666667
      }
   },
   "stratum" : {
      "connected" : true,
      "connection_failures" : 0,
      "host" : "equihash.usa.nicehash.com",
      "port" : 3357,
      "target" : "0007878787800000000000000000000000000000000000000000000000000000"
   },
   "uptime" : 78002,
   "version" : "1.7.0"
}

this is claymore

Code:

{"result": ["8.1 - ETH", "2353", "128510;7550;3", "26062;26119;25445;25478;25404", "0;0;0", "off;off;off;off;off", "66;40;66;40;69;47;69;47;68;55", "daggerhashimoto.usa.nicehash.com:3353", "1707;0;0;0"]}

im tried what you asked and have no luck
its no big deal if it isnt possible

[patrike]

Awesome Miner verison 2.4.1 has been released:
- Added rule trigger for Ping timeout
- Display miner API response time on summary tab
- Claymore's Zcash Miner 12.4 and Claymore's Ethereum Miner 8.1
- Corrections to Managed Template implementation and connection stability

would it possible to get optiminer zec put into the list
it has a monitoring port that can be set at 3333 just like claymore
would be nice if this could be done!!!
keep up the good work! love this program

Have you verified if the API is identical? Can you try to add an External Miner that is pointing to this port, and specify the type as Claymore's Zcash Miner?

the api is different.
this is optiminer

Code:

{
   "iteration_rate" : {
      "GPU0" : {
         "3600s" : 135.39444444444445,
         "5s" : 136,
         "60s" : 135.75
      },
      "GPU1" : {
         "3600s" : 138.97222222222223,
         "5s" : 138,
         "60s" : 138.91666666666666
      },
      "GPU2" : {
         "3600s" : 140.15416666666667,
         "5s" : 140,
         "60s" : 139.91666666666666
      },
      "GPU3" : {
         "3600s" : 139.47083333333333,
         "5s" : 140,
         "60s" : 139.5
      },
      "GPU4" : {
         "3600s" : 139.31666666666666,
         "5s" : 138,
         "60s" : 139.33333333333334
      },
      "Total" : {
         "3600s" : 693.30972222222226,
         "5s" : 695,
         "60s" : 693.25
      }
   },
   "os" : "linux",
   "share" : {
      "accepted" : 11591,
      "rejected" : 29
   },
   "solution_rate" : {
      "GPU0" : {
         "3600s" : 254.52416666666667,
         "5s" : 258.39999999999998,
         "60s" : 256.81666666666666
      },
      "GPU1" : {
         "3600s" : 260.54722222222222,
         "5s" : 265.19999999999999,
         "60s" : 263.78333333333336
      },
      "GPU2" : {
         "3600s" : 263.30333333333334,
         "5s" : 278.80000000000001,
         "60s" : 264.5
      },
      "GPU3" : {
         "3600s" : 261.95833333333331,
         "5s" : 274.60000000000002,
         "60s" : 265.36666666666667
      },
      "GPU4" : {
         "3600s" : 260.98305555555555,
         "5s" : 260,
         "60s" : 260.31666666666666
      },
      "Total" : {
         "3600s" : 1301.3116666666667,
         "5s" : 1344.2,
         "60s" : 1310.1666666666667
      }
   },
   "stratum" : {
      "connected" : true,
      "connection_failures" : 0,
      "host" : "equihash.usa.nicehash.com",
      "port" : 3357,
      "target" : "0007878787800000000000000000000000000000000000000000000000000000"
   },
   "uptime" : 78002,
   "version" : "1.7.0"
}

this is claymore

Code:

{"result": ["8.1 - ETH", "2353", "128510;7550;3", "26062;26119;25445;25478;25404", "0;0;0", "off;off;off;off;off", "66;40;66;40;69;47;69;47;68;55", "daggerhashimoto.usa.nicehash.com:3353", "1707;0;0;0"]}

im tried what you asked and have no luck
its no big deal if it isnt possible

Thanks for providing the information. The only similarity with the Claymore API was that port 3333 was used. Otherwise it's a different API format that currently isn't supported by Awesome Miner.

If it turns out that optiminer is popular, this might get supported in the future.

[patrike]

Awesome Miner version 2.4.2:
- Improvements to the rule action for SSH, with an option to configure wait time between sending commands to multiple hosts
- Corrections to rule actions with many SSH connections

[beltsniffer]

I would like to see Awesome Miner support the Ebit E9 miner. I recently picked 5 of these up and would like to be able to access them through Awesome Miner.

[toptek]

I would like to see Awesome Miner support the Ebit E9 miner. I recently picked 5 of these up and would like to be able to access them through Awesome Miner.

did you try Add new miners it should let you set it up as either a network external miner or external miner. It uses CGMIner if I'm not mistaken but uses bit fury chips but is based off the ant 5 by bit main or uses that kind of idea  ...If that fails try generic miner under managed miners it is very limited in what it can do but should let you see it ..

[unsoindovo]

I would like to see Awesome Miner support the Ebit E9 miner. I recently picked 5 of these up and would like to be able to access them through Awesome Miner.

but they are available back again ??
I had read that they were sold out.
Some a few lucky tester, can get some ebit9.
Where did you buy it???

thnak you...

For dev. i'm interested to buy new avalon 741.
Awesome miner support it??

thnak you

[patrike]

I would like to see Awesome Miner support the Ebit E9 miner. I recently picked 5 of these up and would like to be able to access them through Awesome Miner.

Awesome Miner supports all miners that's based on standard software like cgminer.
As toptek asked above, did you try to add them in Awesome Miner as External Miners?

[patrike]

For dev. i'm interested to buy new avalon 741.
Awesome miner support it??

Avalon 7 miners are supported. I've received reports from users that these miners works fine with Awesome Miner.

[unsoindovo]

For dev. i'm interested to buy new avalon 741.
Awesome miner support it??

Avalon 7 miners are supported. I've received reports from users that these miners works fine with Awesome Miner.

but are you meaning who the newest 741 is working too???
741 it's the latest canaan.io product!!

[patrike]

but are you meaning who the newest 741 is working too???
741 it's the latest canaan.io product!!

OK. I know that Avalon 721 worked out of the box, so it should work just fine with the new one as well. If not, just get back to me and I will add support for it.

[beltsniffer]

I would like to see Awesome Miner support the Ebit E9 miner. I recently picked 5 of these up and would like to be able to access them through Awesome Miner.

Awesome Miner supports all miners that's based on standard software like cgminer.
As toptek asked above, did you try to add them in Awesome Miner as External Miners?

Yes. I have them hosted remotely, along with some other bitmain gear. The bitmain gear all showed up in awesome miner after I added it. But not the E9's. IT just reads "Disconnected". Though I can access it fine through IE.

I tried both CGminer and BFGminer settings, as I don't know what software powers it. All I can find is a system software version number of "soft_v1.0.6.2"

[patrike]

I would like to see Awesome Miner support the Ebit E9 miner. I recently picked 5 of these up and would like to be able to access them through Awesome Miner.

Awesome Miner supports all miners that's based on standard software like cgminer.
As toptek asked above, did you try to add them in Awesome Miner as External Miners?

Yes. I have them hosted remotely, along with some other bitmain gear. The bitmain gear all showed up in awesome miner after I added it. But not the E9's. IT just reads "Disconnected". Though I can access it fine through IE.

I tried both CGminer and BFGminer settings, as I don't know what software powers it. All I can find is a system software version number of "soft_v1.0.6.2"

Can you select the E9 miner in the main window of Awesome Miner, and generate an API report from the toolbar: Tools->API Report. Please send me that report and I will take a look.

In the web interface for the E9 miner, do you see an option to enable the cgminer API for external applications to connect?