yeah i tried mining coienx yesterday.. only shows 0.7 on account so... not that much.
Just wondering - would it be more effective minign solo at 300khs or some pool right now?
I see around 10hbn in the last 40 min solo.
I solo HBN on one computer with just 125kh/s. I always prefer solo. |
|
|
|
lookign at cryptsy... oaverage $value for 1 HN is 0.04$ - so 25 =1$
not too bad. As long as the difficulty wont massively go up.
it stays around .1 -.2 usually. Only was messed up last night and a bit today. just make sure you are matching coinwarz, and coinchoose should be backup soon as well. I'll make sure they are correct. COinex is not correct right now still. |
|
|
|
2 mh/s

{
"version" : "v1.2.2.0-g38a5c87-hobo",
"protocolversion" : 70002,
"blocks" : 378657,
"moneysupply" : 1880585.75623200,
"connections" : 4,
"wallets" : 1,
"proxy" : "",
"difficulty" : 0.01342351,
"testnet" : false,
"paytxfee" : 0.00000000,
"errors" : ""
}
This doesn't seem right. you hsould be at block 379,128 with .1diff You may want to stop what you are doing, and follow this. Stop client. remove the database directory, blk0001.dat, blkindex.dat files %appdata$/HoboNickels dir. then either grab this file http://www.fileswap.com/dl/NU3KZFhXVl/ and un-rar it it over the %appdata$/HoboNickels dir. and start client with addnodes 84.22.139.7 159.224.220.21 118.209.0.241 162.243.69.147 71.79.101.70 91.69.177.224 206.72.202.20 162.243.109.244 178.75.180.121 178.49.118.233 68.186.147.243 Or you can remove peer.dat and set those up as connect until the block chain is downloaded. |
|
|
|

{
"version" : "v1.2.2.0-g38a5c87-hobo",
"protocolversion" : 70002,
"blocks" : 379076,
"moneysupply" : 1882920.57553300,
"connections" : 5,
"wallets" : 1,
"proxy" : "",
"ip" : "84.50.35.16",
"difficulty" : 0.10556557,
"testnet" : false,
"paytxfee" : 0.00000000,
"errors" : ""
}
looks like right... meh thats already too high for any solo mining.
depends on your hash rate. I am working it pretty good with 2.5mh/s |
|
|
|
i dont get teh difficulty in cgminer.
Trying solo and it says 6.93K - coinwars says its 0.1 (someone said 0.018 before Oo did it really go up that much?)
coinwarz is correct. getinfo in the wallet will tell you |
|
|
|
|
coinwarz.com is up and correct. I asked sal to take it down coinchoose, while I made sure, he is a good guy. Great site too
Here are the current stats.
08:02:33

{
"version" : "v1.2.2.0-g38a5c87-hobo",
"protocolversion" : 70002,
"blocks" : 379057,
"moneysupply" : 1882825.57553300,
"connections" : 5,
"wallets" : 4,
"proxy" : "",
"difficulty" : 0.10586109,
"testnet" : false,
"paytxfee" : 0.00000000,
"errors" : ""
}
|
|
|
|
Captain. We had a abit of an issue with HBN, as it is sad to say coinex got on the wrong side of a fork  I tried to contact you as soon as I saw the problem, but I wasn't able to. Please try to get on the right chain asap. https://bitcointalk.org/index.php?topic=303749.300Please PM me for reimbursement, for any users that will go negative after you get on the correct chain. Its not fair to them. Sorry for troubles Thanks. |
|
|
|
|
As long as the pool matches coinwarz it should be safe to open. If you lost any coins during this issue lucazane, please let me know.
|
|
|
|
|
Looks like we are back in business. Sorry for the interruption tonight.
|
|
|
|
This file should speed up the process http://www.fileswap.com/dl/NU3KZFhXVl/just remove the database directory, blk0001.dat, blkindex.dat files then put these in place in the %appdata$/HoboNickels dir. Then add the following nodes. 84.22.139.7 159.224.220.21 118.209.0.241 162.243.69.147 71.79.101.70 91.69.177.224 206.72.202.20 once you are syned. if you are on with coinwarz you should be ok |
|
|
|
I installed the client and it is stuck syncing at block 421
shouldn't get stuck there, maybe much later in the chain. This file should speed up the process http://www.fileswap.com/dl/NU3KZFhXVl/just remove the database directory, blk0001.dat, blkindex.dat files then put these in place in the %appdata%/HoboNickels dir. Then add the following nodes. 84.22.139.7 159.224.220.21 118.209.0.241 162.243.69.147 71.79.101.70 91.69.177.224 206.72.202.20 162.243.109.244 178.75.180.121 178.49.118.233 68.186.147.243 once you are syned. if you are on with coinwarz you should be ok |
|
|
|
I'm solomining HBN just fine, no idea what's wrong with that one.
The newest client is 1.2.2, they're running an outdated client on the pool.
Perhaps not, there was an issue with HBN tonight. Please make sure you match coinwarz before you solo. I am putting the block chain into a download for ease of re downloading. |
|
|
|
./cgminer --scryot -o stratum+tcp://hbn.theblocksfactory.com:3336 -u username.worker -p pass
Typical low reject settings (7950)
thread-conccurency 8192
intensity 13
gpu-thread 2
I <3 mining scryot
Does the stratum work on that pool? In general, none of the info is updating on there. Hey we might have a bit of a fork here, coinex.pw is the only working pool and they just crushed the block chain. So just be mindful for a bit while I sort this out.
What is the current diff? CoinEX has 0.5087 and Coinwarz is showing .018, is there a major fork happening? I think the blocksfactory is down.. Best to solo mine as long as you match coinwarz. Guess time to make that conf file for solo mining. The diff is low enough to solo mine. yes jsut make sure you match coinwarz before you start. here are some addnodes 84.22.139.7 159.224.220.21 118.209.0.241 162.243.69.147 91.69.177.224 206.72.202.20 |
|
|
|
./cgminer --scryot -o stratum+tcp://hbn.theblocksfactory.com:3336 -u username.worker -p pass
Typical low reject settings (7950)
thread-conccurency 8192
intensity 13
gpu-thread 2
I <3 mining scryot
Does the stratum work on that pool? In general, none of the info is updating on there. Hey we might have a bit of a fork here, coinex.pw is the only working pool and they just crushed the block chain. So just be mindful for a bit while I sort this out.
What is the current diff? CoinEX has 0.5087 and Coinwarz is showing .018, is there a major fork happening? I think the blocksfactory is down.. Best to solo mine as long as you match coinwarz. |
|
|
|
./cgminer --scryot -o stratum+tcp://hbn.theblocksfactory.com:3336 -u username.worker -p pass
Typical low reject settings (7950)
thread-conccurency 8192
intensity 13
gpu-thread 2
I <3 mining scryot
Does the stratum work on that pool? In general, none of the info is updating on there. Hey we might have a bit of a fork here, coinex.pw is the only working pool and they just crushed the block chain. So just be mindful for a bit while I sort this out.
What is the current diff? CoinEX has 0.5087 and Coinwarz is showing .018, is there a major fork happening? Coinex is wrong, do not mine there. .018 is correct. The checkpoints are making the rounds and will fix the issue. All other sites seems to be in good shape. |
|
|
|
|
I think you are on the right chain. coinex forked off. But I will let everyone know here shorlty.
|
|
|
|
mining solo is ok now? or better to wait?
Its ok, just may not count toward the correct blockchain. One will get wipped. Not lot of time just a few hours. I am still sorting it out. Can you tell me what your getinfo says? |
|
|
|
|
Hey we might have a bit of a fork here, coinex.pw is the only working pool and they just crushed the block chain. So just be mindful for a bit while I sort this out.
|
|
|
|
|
Hey guys. I made a mistake. The checkpoint server got rebooted last night. And I was bringing it back online, and I didn't let it catch up first before starting the checkpoints. This caused an issue and we rolled back.
My deep regrets on this.
Some polls and miners lost some coins. I will pay back all. Just hit me up.
Also if you are getting mempool errors. you can solve this by stopping the client and restarting with -salvagewallet.
Again I am truly sorry.
|
|
|
|
|
Show Posts
