Rx Vega 1400/1100@0.9v - 1600h/s @ 130w from the wall
At wall? Really? Which miner? |
|
|
|
Thanks for the guide. These are my results:
Shappire Nitro+ RX470 4 GB OC (Hynix)
core/mem 1050/1950
claymore 698 h/s - 125 watt
sgminer-gm 703 h/s - 110 watt (rawintensity 500 / worksize 4 / gpu-threads 2)
Not bad, now you need to tweak the bios. Try intensity 512. |
|
|
|
Does anybody here have GPU with Hynix H5GC8H24MJ memory? I need test timings. The only card I know using this is MSI RX 580 Gaming X 8GB Hynix. Thanks.
I have this card Do you know how to mod bios? Write me an e-mail I will send you the timing strap. |
|
|
|
I might do that, but except Uber-Mix those other timings are leaked and creator of that PBE took it somewhere not even mention the original creator of those timings, probably he doesn't even know who made them. They aren't so good, it won't work with every cards. Some memory types is missing there. And for some vendors it should also detect VRAM size. Maybe in next version.
Isn't it too early for you to tell all of these? I want to see which cards have you tried with this PBE 1.6 and what are your results. Then I would want to see your comparison with the output of this PBE to your "custom" timing straps if they are really night and day. I'm a proponent of free and accessible stuff for the benefit of everyone after all. Well me too, I've made this guide for all for free. I've got 0 tip for that. What do you do for the good of mining community? The PBE 1.6 is out for few weeks now. I've seen all those timings months ago, they aren't new. Wolf0 was talking about the Hynix strap I think he marked it with B-. They use it on youtube videos for a while now... only new thing the PBE 1.6 do is the one click edit. But still it's better than copy 1500Mhz straps. |
|
|
|
|
I might do that, but except Uber-Mix those other timings are leaked and creator of that PBE took it somewhere not even mention the original creator of those timings, probably he doesn't even know who made them. They aren't so good, it won't work with every cards. Some memory types is missing there. And for some vendors it should also detect VRAM size. Maybe in next version.
|
|
|
|
Hi guys, I already submitted my results but also want to share it here as well:
6x PowerColor Red Dragon RX 480 4GB (Samsung)
1266/2100MHz @100W (for 4 cards, other 2's mem speed have to be reduced to 2000 and 2050MHz)
Ubuntu 16.04
XMR-STAK-AMD
Config settings - Intensity: 1024, Worksize: 8/256
Results: 4,890 H/s (811~819 H/s per card)
I mod each card's BIOS individually in Windows, test for stability then use it in Ubuntu. Using Ubermix 3.1's memory timings which I think helps a bit with the Hashrate.
Helps a bit?  Only around 20% improvement in hashrate |
|
|
|
Как и когда можно получить монеты за подписку и реферальные?
I think only english is allowed here. |
|
|
|
sapphire rx580 8G oc (Hynix) ; ETH 30Mhs MOD
core/mem 1411/2200
sgminer-gm
800mhs~
That's probably not very good bios mod... 1411MHz on core? What are your voltages? |
|
|
|
I've done the signature campaign, I've also wrote an e-mail about it, no respond yet...
Also nobody fix the signature on your websites... I've sent e-mail where I point out mistakes in signature for full members and wrong image size, no respond, only some respond in comments under post but no fix.
I'm start thinking this is not that good project as I thought.
Hello, Also answered to your post on our app: https://www.crowdholding.com/project/68/task/249/bounty-marketing-assistance-signature-campaignWhitepaper link is fixed. Avatar size is fixed. Thank you for the feedback Almost fixed, but avatar has bad size still, 120x80 is max. There is only part of full member code... |
|
|
|
Hi Guys SO I have made some progress since early on.....
I took the risk of trying again.... this time more calm.... So, I have backup the bios with ATIWinFlash..... I copy the timings from 1750 to 2000 and to 2250....
Restarted a few times and applied the patch the bios check and looks like it worked. I have three cards I have flashed one by one and restarted after each time and at the end after doing this to all three I have applied the patch and restarted again....
Using Trixx I have setup to GPU clock 1150 - Memory 2000 Power Limit 0% GPU Voltage -96 give or take this is the average for the cards with a few tweaks here and there..... (Still have a long way to run to find out the best specs)
It's giving me a 24mh each so all this for 7mhz more...
Its looking stable however I am sure its possible to find a better timing and get a better performance... Overall the all system is pulling 400W from the wall... This shown by a Watt Meter on the main plug.... so same wattage however a little bit more hash.... I just though maybe would be able to help someone on the same problem .... Still as a said before not perfect and I might try other timing later on...
You won't get far with copying these straps. :/ You might set lower voltages in bios. |
|
|
|
|
I've done the signature campaign, I've also wrote an e-mail about it, no respond yet...
Also nobody fix the signature on your websites... I've sent e-mail where I point out mistakes in signature for full members and wrong image size, no respond, only some respond in comments under post but no fix.
I'm start thinking this is not that good project as I thought.
|
|
|
|
Hi guys i will say that i am quite new to the mining world and i have already made the first mistake.... i believe...
I have the following
Gugabyte b350 gaming AM4
Ryden 3 1200
Amd asus R230 to connect a monitor(poor choice of mother board or graphic cards)
3x Sapphire Rx470 8gb Nitro Mining edition hynix memory
Psu 850w
First issue my cards dont have monitor connection... so r230 was bought obly to be able to configurate this...
By default cards hit the 600w from de wall(all shstem) gives me 20.300mhz
I have change the clocks using trixx and i am getting 21.5mhz on two cards and 20.3 on the third one and the whole system is pulling 400w what is better but not perfect. The manufacture says 24 to 27 what is not happening... therefore i need to mod the bios to try to get better hashes...
I have read and watched multiple videos about modding cards and similar cards i have even tried once(i though i jad bricked card)
So first of all.... all the videos i saw the card had straps up to 2000 my one has and additional one 2250... in all videos the timing that was added to 1725 to 2000 started with a 777 my card on the same places has a 999 on the timing...
Still tried to copy paste the 1725 to the 2000 and to the 2250.... windows restarted with a blue screen about some errors..... the card was not readable as the drivers were says unknow on the gpuz..... atiwinflash would not star normally and would appear error reading rom. Using Cmd i was able to flash back to backup and after unistalling the drivers and card and reinstalling everything i got it working again..... before flashing back i tried the amd dagpatch for the checking bios and nothing worked.... i definetely i need more hashrate on this outherwise i will be losing on the cards investement..... can some one help me with the timing and config to make this run for last i am using thr latet driver 17.7.2.....
Any gool soul to help out a new miner for the eth community?
Well you might hope, but they are thousands like you, guys who know how to do good bios mod wouldn't do anything else |
|
|
|
when i put eminer -h at my .bat, its auto close
At the end of the batch file put pause, it won't close. |
|
|
|
I have Dual RX 480 8GB, on ETH doing 30-31MH/s, those Samsung aren't best, Monero 800+H/s. Cooling is really awful. |
|
|
|
Hi all, I am in the situation that I have free electricity and wanted to know if it's worth to get into mining at this point? I started to mine Monero on my gaming pc just because I am interested in the technology. It would take a long time to get back the cost for the hardware, so you kind of have to count on that the coin appreciates right? Which coin would you recommend? Also which Hardware would you recommend? There are so many options I am kind of confused. Mine Monero with GPUs and hope they appreciate or buy an ASIC and mine ETH or BTC... I have a budget of 4000$. Also I have cool temperatures and fast internet (900 mb/s) if that matters in any way? Thanks for your help  Monero was a good choice few months ago But it's still good to mine even now. With same AMD GPUs you may mine ETH too. ASIC would be great too, we might get better group price for Innosilicon A4+, there is topic about it. |
|
|
|
Hi,
I have RX580 to (sapphire nitro +).
There bios are modded for ETH, and they give me ~30mhs in ETH.
But for XMR I can't get more than 600mhs !
What are important parameters to mod for increasing my XMR hashrate (GPU freq, MEM, timmig, ...) ?
Thanks in advance
Timings and memory clocks are most important also depends what miner are you using and its config. |
|
|
|
|
Show Posts
