teosanru
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 11:57:44 AM |
|
Someone can say when they enabled the withdrawals in cryptopia of the bought coins since it was identified that crypopia was in the long chain as the nodes of drays, I have accumulated mondeas in cryptopia that I have not been able to withdraw, because they have disabled the withdrawals, and I have my First masternode syncronized and producing coins, the number of blocks is in: 979698
Is there any slack channel for this currency? Please share the invitation link thank you.
|
|
|
|
|
peachcakey
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 12:21:24 PM |
|
Someone can say when they enabled the withdrawals in cryptopia of the bought coins since it was identified that crypopia was in the long chain as the nodes of drays, I have accumulated mondeas in cryptopia that I have not been able to withdraw, because they have disabled the withdrawals, and I have my First masternode syncronized and producing coins, the number of blocks is in: 979698
Is there any slack channel for this currency? Please share the invitation link thank you.
Yes the slack is posted right before your message.
|
|
|
|
furcointalk
Newbie
Offline
Activity: 28
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 02:24:01 PM Last edit: July 19, 2017, 03:03:01 PM by furcointalk |
|
Address: 8N7xcRdW4p9sRLT3KzyJH7Hn7ABLmbMGMy TxId: 63e34740e8df854b8375303922cdb64d451c5b7e84da221f882fcee922735f37
I have an up to date wallet but my 2000 coins are missing from bittrex withdrawal.
|
|
|
|
drays
Legendary
Offline
Activity: 2562
Merit: 1073
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 04:21:06 PM |
|
Yes, masternodes work perfectly on Linux (Ubuntu in particular). Not sure there are instructions for this coin, but the process is the same as most other masternode coins, aka Dash or BitSend. The collateral is 112 8BIT, thats the only difference.
Also, masternode.conf cannot be used with the current source, but that is easily fixable, if anyone needs, I can send the instructions to patch the source.
Please send instructions Heh, to write good instructions, I have to spend a lot of time, which I don't have unfortunately. To write bad instructions, I need much less time, but I don't want to write bad instructions. However here is a good guide here for setting up ChainCoin masternodes: http://chaincoin.org/Setting%20up%20a%20Chaincoin%20Masternode%20-%20draft%20v.04.pdfIt is too detailed to my taste, but is a nice one. With some understanding, you can follow it, while replacing ChainCoin with 8bit where needed. Or just read it, to get an idea on what needs to be done. The first part (setting up a VPS) is completely generic, and can be followed blindly. The second part - needs to be adopted for 8bit. Volunteers welcome. thanks, I was referring to if you could send the instructions to patch the source The configuration of the generic mastery that I know, but what I asked for is what you offered previously Sure. Will send it tomorrow (its late night here, and I am not at my pc). Remember - this little source patch is only needed to be able to run many masternodes at once using "masternode.conf". I suppose you should already know how to use masternode.conf, so will just send the small code patch. Still waiting for the patch to run multiple masternodes on Ubuntu. It would be perfect if you can just mention the simplified version of the instructions for complete beginners like me, that have already read tutorials about masternodes but might encounter dificulties setting it up for 8bit. Why are you waiting for the patch? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I promised to send it to the ones who request it, and so I did - I sent it to everyone who dropped me a PM. Youy were not one of them, because you never wrote me anything ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Anyway, its not a secret to hide it. Here is that small patch (it is very simple - just add a missing code): diff --git a/src/bitcoind.cpp b/src/bitcoind.cpp index 733eb2e..ce70263 100644 --- a/src/bitcoind.cpp +++ b/src/bitcoind.cpp @@ -6,6 +6,7 @@ #include "rpcserver.h" #include "rpcclient.h" #include "init.h" +#include "masternodeconfig.h" #include <boost/algorithm/string/predicate.hpp> void WaitForShutdown(boost::thread_group* threadGroup) @@ -63,6 +64,13 @@ bool AppInit(int argc, char* argv[]) return false; } + // parse masternode.conf + std::string strErr; + if(!masternodeConfig.read(strErr)) { + fprintf(stderr,"Error reading masternode configuration file: %s\n", strErr.c_str()); + return false; + } + // Command-line RPC for (int i = 1; i < argc; i++) if (!IsSwitchChar(argv[i][0]) && !boost::algorithm::istarts_with(argv[i], "8bit:")) To use it, you need to paste this text into a file (for example called "8bit.patch"), then call "patch src/bitcoind.cpp 8bit.patch" This is what I promised to give. I never promised to write instructions on how to run multiple masternodes. I would be happy to write such instructions, but have too little time to do that due to me being busy with my day job. There are lots of such instructions in the internet (just do a google search) for many other coins. I personally used one of those instructions few years ago to start my first MN setup. Those instructions could be used as a starting point for 8BIT ones. If someone does it, it would be great help to all the newbies here... But I cannot do that personally, due to time constraints. But I can help to review such doc, if somebody goes ahead and writes it. To get some idea on how to run multiple masternodes, see this: https://dashpay.atlassian.net/wiki/pages/viewpage.action?pageId=1867877. Note that running multiple masternodes using "masternode.conf" is an advanced topic. If you are new to MN setup, try to run one MN first. Then try to run "hot wallet/cold wallet" setup. Then try to master multi-MN setups. It could take time and effort. I could help with advanced specific questions, but not with general ones.
|
... this space is not for rent ...
|
|
|
drays
Legendary
Offline
Activity: 2562
Merit: 1073
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 04:27:52 PM |
|
Address: 8N7xcRdW4p9sRLT3KzyJH7Hn7ABLmbMGMy TxId: 63e34740e8df854b8375303922cdb64d451c5b7e84da221f882fcee922735f37
I have an up to date wallet but my 2000 coins are missing from bittrex withdrawal.
Bittrex is on the wrong (short) fork. Their wallet is disabled for few days already, so I assume you did this withdrawal about a week ago. I also have coins on Bittrex, but didn't withdraw them, as I tried with small amount first, and saw them going nowhere. We can only hope Bittrex will re-sync to the correct (long) chain and resend the transactions. You could open a ticket with them. I have one opened ticket, they were answering initially, but after I offered them my help with re-syncing to the correct chain, I got nothing in reply. Hope they don't just discard our coins after they delist the wallet. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Bug them, so they don't do it
|
... this space is not for rent ...
|
|
|
teosanru
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 04:34:07 PM |
|
Yes, masternodes work perfectly on Linux (Ubuntu in particular). Not sure there are instructions for this coin, but the process is the same as most other masternode coins, aka Dash or BitSend. The collateral is 112 8BIT, thats the only difference.
Also, masternode.conf cannot be used with the current source, but that is easily fixable, if anyone needs, I can send the instructions to patch the source.
Please send instructions Heh, to write good instructions, I have to spend a lot of time, which I don't have unfortunately. To write bad instructions, I need much less time, but I don't want to write bad instructions. However here is a good guide here for setting up ChainCoin masternodes: http://chaincoin.org/Setting%20up%20a%20Chaincoin%20Masternode%20-%20draft%20v.04.pdfIt is too detailed to my taste, but is a nice one. With some understanding, you can follow it, while replacing ChainCoin with 8bit where needed. Or just read it, to get an idea on what needs to be done. The first part (setting up a VPS) is completely generic, and can be followed blindly. The second part - needs to be adopted for 8bit. Volunteers welcome. thanks, I was referring to if you could send the instructions to patch the source The configuration of the generic mastery that I know, but what I asked for is what you offered previously Sure. Will send it tomorrow (its late night here, and I am not at my pc). Remember - this little source patch is only needed to be able to run many masternodes at once using "masternode.conf". I suppose you should already know how to use masternode.conf, so will just send the small code patch. Still waiting for the patch to run multiple masternodes on Ubuntu. It would be perfect if you can just mention the simplified version of the instructions for complete beginners like me, that have already read tutorials about masternodes but might encounter dificulties setting it up for 8bit. Why are you waiting for the patch? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I promised to send it to the ones who request it, and so I did - I sent it to everyone who dropped me a PM. Youy were not one of them, because you never wrote me anything ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Anyway, its not a secret to hide it. Here is that small patch (it is very simple - just add a missing code): diff --git a/src/bitcoind.cpp b/src/bitcoind.cpp index 733eb2e..ce70263 100644 --- a/src/bitcoind.cpp +++ b/src/bitcoind.cpp @@ -6,6 +6,7 @@ #include "rpcserver.h" #include "rpcclient.h" #include "init.h" +#include "masternodeconfig.h" #include <boost/algorithm/string/predicate.hpp> void WaitForShutdown(boost::thread_group* threadGroup) @@ -63,6 +64,13 @@ bool AppInit(int argc, char* argv[]) return false; } + // parse masternode.conf + std::string strErr; + if(!masternodeConfig.read(strErr)) { + fprintf(stderr,"Error reading masternode configuration file: %s\n", strErr.c_str()); + return false; + } + // Command-line RPC for (int i = 1; i < argc; i++) if (!IsSwitchChar(argv[i][0]) && !boost::algorithm::istarts_with(argv[i], "8bit:")) To use it, you need to paste this text into a file (for example called "8bit.patch"), then call "patch src/bitcoind.cpp 8bit.patch" This is what I promised to give. I never promised to write instructions on how to run multiple masternodes. I would be happy to write such instructions, but have too little time to do that due to me being busy with my day job. There are lots of such instructions in the internet (just do a google search) for many other coins. I personally used one of those instructions few years ago to start my first MN setup. Those instructions could be used as a starting point for 8BIT ones. If someone does it, it would be great help to all the newbies here... But I cannot do that personally, due to time constraints. But I can help to review such doc, if somebody goes ahead and writes it. To get some idea on how to run multiple masternodes, see this: https://dashpay.atlassian.net/wiki/pages/viewpage.action?pageId=1867877. Note that running multiple masternodes using "masternode.conf" is an advanced topic. If you are new to MN setup, try to run one MN first. Then try to run "hot wallet/cold wallet" setup. Then try to master multi-MN setups. It could take time and effort. I could help with advanced specific questions, but not with general ones. Thanks Drays that had done in arcticcoin, is the same procedure for multiple masternodes in the same wallet, very timely your contributions
|
|
|
|
peachcakey
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 07:04:26 PM |
|
Address: 8N7xcRdW4p9sRLT3KzyJH7Hn7ABLmbMGMy TxId: 63e34740e8df854b8375303922cdb64d451c5b7e84da221f882fcee922735f37
I have an up to date wallet but my 2000 coins are missing from bittrex withdrawal.
Bittrex is on the wrong (short) fork. Their wallet is disabled for few days already, so I assume you did this withdrawal about a week ago. I also have coins on Bittrex, but didn't withdraw them, as I tried with small amount first, and saw them going nowhere. We can only hope Bittrex will re-sync to the correct (long) chain and resend the transactions. You could open a ticket with them. I have one opened ticket, they were answering initially, but after I offered them my help with re-syncing to the correct chain, I got nothing in reply. Hope they don't just discard our coins after they delist the wallet. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Bug them, so they don't do it Already encouraged people to do so on our Slack & Telegram groups - Pinned messages so everyone can see them. You are more than welcome to join the slack and telegram. I'm sure you have a lot to contribute and your contribution would be greatly appreciated.
|
|
|
|
furcointalk
Newbie
Offline
Activity: 28
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 09:30:29 PM |
|
Address: 8N7xcRdW4p9sRLT3KzyJH7Hn7ABLmbMGMy TxId: 63e34740e8df854b8375303922cdb64d451c5b7e84da221f882fcee922735f37
I have an up to date wallet but my 2000 coins are missing from bittrex withdrawal.
Bittrex is on the wrong (short) fork. Their wallet is disabled for few days already, so I assume you did this withdrawal about a week ago. I also have coins on Bittrex, but didn't withdraw them, as I tried with small amount first, and saw them going nowhere. We can only hope Bittrex will re-sync to the correct (long) chain and resend the transactions. You could open a ticket with them. I have one opened ticket, they were answering initially, but after I offered them my help with re-syncing to the correct chain, I got nothing in reply. Hope they don't just discard our coins after they delist the wallet. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Bug them, so they don't do it Thanks for the reply. I've already withdrawn the coins, are they lost forever? What if I sync the short chain wallet? Can I recover my coins then?
|
|
|
|
Smokeyw
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 09:38:21 PM |
|
wallet syncing is taking forever how do i fix this still 1 year and 48 weeks to go ??
The snapshot of the blockchain that shared drays, plus their masternodes as a source, allowed me to sync my wallet finaly this worked thanks alot guys when get this wallet fixed ? wallet keep 3 day syncing dont past it i want to send my coin and setup my masternode
|
|
|
|
teosanru
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 09:47:21 PM |
|
wallet syncing is taking forever how do i fix this still 1 year and 48 weeks to go ??
The snapshot of the blockchain that shared drays, plus their masternodes as a source, allowed me to sync my wallet finaly this worked thanks alot guys when get this wallet fixed ? wallet keep 3 day syncing dont past it i want to send my coin and setup my masternode I have mine configured, did you do everything as it should be? Did you open the ports? Erase all the 8bit folder to exepcion of wallet.dat and 8bit.conf? Did you know the correct configuration in the .conf file?
|
|
|
|
xphound
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 10:28:47 PM |
|
has anyone got upto date block link
|
|
|
|
teosanru
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 11:08:04 PM |
|
has anyone got upto date block link
I have my wallet in sync I'll try to upload a copy of the blockchain so far, from my masternode, but I'll do it later and I'll share it in the slack
|
|
|
|
Smokeyw
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 11:09:51 PM |
|
wallet syncing is taking forever how do i fix this still 1 year and 48 weeks to go ??
The snapshot of the blockchain that shared drays, plus their masternodes as a source, allowed me to sync my wallet finaly this worked thanks alot guys when get this wallet fixed ? wallet keep 3 day syncing dont past it i want to send my coin and setup my masternode I have mine configured, did you do everything as it should be? Did you open the ports? Erase all the 8bit folder to exepcion of wallet.dat and 8bit.conf? Did you know the correct configuration in the .conf file? why open ports for syncing my wallet ? yes i have replace all files that comes with the zip file and in my 8bitconfig file i got this addnode=104.207.131.249 addnode=184.164.129.202 addnode=136.243.147.46 addnode=144.76.115.195 addnode=136.243.147.46 addnode=136.243.147.46 addnode=197.231.221.211 addnode=136.243.147.46 addnode=85.10.199.167 addnode=136.243.147.46 addnode=5.141.198.37 addnode=136.243.147.46 addnode=207.138.200.254 addnode=91.10.24.229 addnode=85.10.199.167 addnode=46.101.15.38 addnode=136.243.147.46 addnode=98.14.211.131 addnode=136.243.147.46
|
|
|
|
teosanru
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 11:13:08 PM |
|
wallet syncing is taking forever how do i fix this still 1 year and 48 weeks to go ??
The snapshot of the blockchain that shared drays, plus their masternodes as a source, allowed me to sync my wallet finaly this worked thanks alot guys when get this wallet fixed ? wallet keep 3 day syncing dont past it i want to send my coin and setup my masternode I have mine configured, did you do everything as it should be? Did you open the ports? Erase all the 8bit folder to exepcion of wallet.dat and 8bit.conf? Did you know the correct configuration in the .conf file? why open ports for syncing my wallet ? yes i have replace all files that comes with the zip file and in my 8bitconfig file i got this addnode=104.207.131.249 addnode=184.164.129.202 addnode=136.243.147.46 addnode=144.76.115.195 addnode=136.243.147.46 addnode=136.243.147.46 addnode=197.231.221.211 addnode=136.243.147.46 addnode=85.10.199.167 addnode=136.243.147.46 addnode=5.141.198.37 addnode=136.243.147.46 addnode=207.138.200.254 addnode=91.10.24.229 addnode=85.10.199.167 addnode=46.101.15.38 addnode=136.243.147.46 addnode=98.14.211.131 addnode=136.243.147.46 Well if you do not want to open the ports it will not work, maybe you do not know that the rpc ports open for the port allows the connections to it, without connections correct the speed of the synchronization is slow, and the wallet is stuck, I say because it happened, Configure everything well if you want to synchronize your wallet and I have synchronized 5 to configure masternodes
|
|
|
|
Smokeyw
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 11:15:42 PM |
|
wallet syncing is taking forever how do i fix this still 1 year and 48 weeks to go ??
The snapshot of the blockchain that shared drays, plus their masternodes as a source, allowed me to sync my wallet finaly this worked thanks alot guys when get this wallet fixed ? wallet keep 3 day syncing dont past it i want to send my coin and setup my masternode I have mine configured, did you do everything as it should be? Did you open the ports? Erase all the 8bit folder to exepcion of wallet.dat and 8bit.conf? Did you know the correct configuration in the .conf file? why open ports for syncing my wallet ? yes i have replace all files that comes with the zip file and in my 8bitconfig file i got this addnode=104.207.131.249 addnode=184.164.129.202 addnode=136.243.147.46 addnode=144.76.115.195 addnode=136.243.147.46 addnode=136.243.147.46 addnode=197.231.221.211 addnode=136.243.147.46 addnode=85.10.199.167 addnode=136.243.147.46 addnode=5.141.198.37 addnode=136.243.147.46 addnode=207.138.200.254 addnode=91.10.24.229 addnode=85.10.199.167 addnode=46.101.15.38 addnode=136.243.147.46 addnode=98.14.211.131 addnode=136.243.147.46 Well if you want'n to open the ports it will not work, maybe you do not know that the rpc ports open for the port allows the connections to it, without connections correct the speed of the synchronization is slow, and the wallet is stuck, I say because it happened, Configure everything well if you want to synchronize your wallet and I have synchronized 5 to configure masternodes i dont use the masternode yet then i have to open my port i know that but for only to use the wallet you never have to open any port
|
|
|
|
teosanru
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 11:19:15 PM |
|
wallet syncing is taking forever how do i fix this still 1 year and 48 weeks to go ??
The snapshot of the blockchain that shared drays, plus their masternodes as a source, allowed me to sync my wallet finaly this worked thanks alot guys when get this wallet fixed ? wallet keep 3 day syncing dont past it i want to send my coin and setup my masternode I have mine configured, did you do everything as it should be? Did you open the ports? Erase all the 8bit folder to exepcion of wallet.dat and 8bit.conf? Did you know the correct configuration in the .conf file? why open ports for syncing my wallet ? yes i have replace all files that comes with the zip file and in my 8bitconfig file i got this addnode=104.207.131.249 addnode=184.164.129.202 addnode=136.243.147.46 addnode=144.76.115.195 addnode=136.243.147.46 addnode=136.243.147.46 addnode=197.231.221.211 addnode=136.243.147.46 addnode=85.10.199.167 addnode=136.243.147.46 addnode=5.141.198.37 addnode=136.243.147.46 addnode=207.138.200.254 addnode=91.10.24.229 addnode=85.10.199.167 addnode=46.101.15.38 addnode=136.243.147.46 addnode=98.14.211.131 addnode=136.243.147.46 Well if you want'n to open the ports it will not work, maybe you do not know that the rpc ports open for the port allows the connections to it, without connections correct the speed of the synchronization is slow, and the wallet is stuck, I say because it happened, Configure everything well if you want to synchronize your wallet and I have synchronized 5 to configure masternodes i dont use the masternode yet then i have to open my port i know that but for only to use the wallet you never have to open any port I have faced synchronization problems, for not opening the ports of connection to the wallet in other currencies, and the portfolios have not had problem of bifurcation as with this currency, if you want to remain stuck, I do not understand to install a wallet but if not the Are you going to use
|
|
|
|
Smokeyw
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 11:26:20 PM |
|
wallet syncing is taking forever how do i fix this still 1 year and 48 weeks to go ??
The snapshot of the blockchain that shared drays, plus their masternodes as a source, allowed me to sync my wallet finaly this worked thanks alot guys when get this wallet fixed ? wallet keep 3 day syncing dont past it i want to send my coin and setup my masternode I have mine configured, did you do everything as it should be? Did you open the ports? Erase all the 8bit folder to exepcion of wallet.dat and 8bit.conf? Did you know the correct configuration in the .conf file? why open ports for syncing my wallet ? yes i have replace all files that comes with the zip file and in my 8bitconfig file i got this addnode=104.207.131.249 addnode=184.164.129.202 addnode=136.243.147.46 addnode=144.76.115.195 addnode=136.243.147.46 addnode=136.243.147.46 addnode=197.231.221.211 addnode=136.243.147.46 addnode=85.10.199.167 addnode=136.243.147.46 addnode=5.141.198.37 addnode=136.243.147.46 addnode=207.138.200.254 addnode=91.10.24.229 addnode=85.10.199.167 addnode=46.101.15.38 addnode=136.243.147.46 addnode=98.14.211.131 addnode=136.243.147.46 Well if you want'n to open the ports it will not work, maybe you do not know that the rpc ports open for the port allows the connections to it, without connections correct the speed of the synchronization is slow, and the wallet is stuck, I say because it happened, Configure everything well if you want to synchronize your wallet and I have synchronized 5 to configure masternodes i dont use the masternode yet then i have to open my port i know that but for only to use the wallet you never have to open any port I have faced synchronization problems, for not opening the ports of connection to the wallet in other currencies, and the portfolios have not had problem of bifurcation as with this currency, if you want to remain stuck, I do not understand to install a wallet but if not the Are you going to use maybe its my bad english srry about that the wallet has 8 connections but it wont sync stays at 3 days anyways i will wait since i cant get my coins from cryptopia because investigating network fork
|
|
|
|
teosanru
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2017, 11:30:04 PM |
|
wallet syncing is taking forever how do i fix this still 1 year and 48 weeks to go ??
The snapshot of the blockchain that shared drays, plus their masternodes as a source, allowed me to sync my wallet finaly this worked thanks alot guys when get this wallet fixed ? wallet keep 3 day syncing dont past it i want to send my coin and setup my masternode I have mine configured, did you do everything as it should be? Did you open the ports? Erase all the 8bit folder to exepcion of wallet.dat and 8bit.conf? Did you know the correct configuration in the .conf file? why open ports for syncing my wallet ? yes i have replace all files that comes with the zip file and in my 8bitconfig file i got this addnode=104.207.131.249 addnode=184.164.129.202 addnode=136.243.147.46 addnode=144.76.115.195 addnode=136.243.147.46 addnode=136.243.147.46 addnode=197.231.221.211 addnode=136.243.147.46 addnode=85.10.199.167 addnode=136.243.147.46 addnode=5.141.198.37 addnode=136.243.147.46 addnode=207.138.200.254 addnode=91.10.24.229 addnode=85.10.199.167 addnode=46.101.15.38 addnode=136.243.147.46 addnode=98.14.211.131 addnode=136.243.147.46 Well if you want'n to open the ports it will not work, maybe you do not know that the rpc ports open for the port allows the connections to it, without connections correct the speed of the synchronization is slow, and the wallet is stuck, I say because it happened, Configure everything well if you want to synchronize your wallet and I have synchronized 5 to configure masternodes i dont use the masternode yet then i have to open my port i know that but for only to use the wallet you never have to open any port I have faced synchronization problems, for not opening the ports of connection to the wallet in other currencies, and the portfolios have not had problem of bifurcation as with this currency, if you want to remain stuck, I do not understand to install a wallet but if not the Are you going to use maybe its my bad english srry about that the wallet has 8 connections but it wont sync stays at 3 days anyways i will wait since i cant get my coins from cryptopia because investigating network fork When did you buy I bought the 15 and when I synchronized my wallet appeared my coins, and my English is bad, but if you want I will share a copy of the blockchain in about 90 minutes, to download it and try to synchronize
|
|
|
|
instahater
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2017, 12:06:50 AM |
|
This wallet is trash.. I can't sync past 11 days!! FML! This is why this coin is dead.
|
|
|
|
|