[ANN] Ħ [HODL] No Staking, 1% Standard Interest per Day, 750% APR For HOdlers

[Jabba]

YES!!!!!! Always backup your wallet.dat - otherwise your coins get lost.

[Hakko]

Question from a HODL-beginner (but meanwhile # 2 on http://hodl.optiminer.pl/) 

I am mining on a Windows10 PC in a DOS-Window using the hodlminer-optiminer-fork.zip (http://cryptomining-blog.com/8196-new-faster-hodlminer-and-a-new-mining-pool-for-it-now-available/)
I installed the HOdlcoin Core - Wallet (HOdlcoin Core Version v3.0.1 (64-Bit)).

I mined and transfered 50 this morning. I transfered the "Principal"() to my Deposit.

Since then I mined further and now, the mining-stats say:

• balance:      58.583
• pending balance:   3.041
• pending payout:   0.000

In the Wallet-Overview there are those informations:

LEFT SIDE / Balances

• Available:   0.00040328 HODL
• Pending:   0.00000000 HODL
• Immature:   75.49408949 HODL
• Total:      75.49449277 HODL
• Available:   0.00040328

RIGHT SIDE / Recent transactions

• 13.07.17 09:21 +49.99998840 HODL (received with my HODLadress ...)
• 13.07.17 09:21 +0.00040325 (HODL-Adress I dont know)
• 13.07.17 05:15 +50.00000000 (Mined Confirmed 310 confimations)

BOTTOM / HOdlings (only one row)

• Status         HOdled
• Principal      49.99998840
• Accrued Interest   0.00822637
• Accrued Value   50.00822637
• On Maturation   75.49473154
• Term (Days)      365
• Deposit Block   0281625
• Maturation Block   0486391
• Estimated Date   2018/07/13

MY QUESTIONS:
1. The requirement for a payout? I thought: Balance >=50 then payout
2. After a payout I need 21 confirmations before the mined 50 (Blocks/HODLES???) are transfered to my pending balance?
3. After each payout I have to transfer the pending amount to my deposit?

[kaltun]

I quote myself from some posts before:

If you discover a difference you can start a reindex of your local block chain by entering 'hodlcoin-qt.exe  -reindex' in a DOS box

Your hodlcoin-qt.exe file can be found under windows in c:\program files\hodlcoin (or the folder where your HodlCoin link points to)

Good Luck!

Dear Jabba,

you saved my coins, after downloading the new wallet it didnt solve my problem , till i saw your ( second) reply about reindex, i did what you wrote and after resync i saw my coins back at my wallet ...


thx again for your help...

[ghobson]

I quote myself from some posts before:

If you discover a difference you can start a reindex of your local block chain by entering 'hodlcoin-qt.exe  -reindex' in a DOS box

Your hodlcoin-qt.exe file can be found under windows in c:\program files\hodlcoin (or the folder where your HodlCoin link points to)

Good Luck!

Dear Jabba,

you saved my coins, after downloading the new wallet it didnt solve my problem , till i saw your ( second) reply about reindex, i did what you wrote and after resync i saw my coins back at my wallet ...


thx again for your help...

glad its resolved kaltun

[ghobson]

Can't sync, anyone having the same problem.
Stuck at 278862

make sure to use v3.0.1 , you may need to start with -reindex flag
takes about 45 mins to rebuild the block index ( this does not redownload the blockchain )

 you may need to start with -reindex flag, what does that mean ?!?!

You can start a reindex of your local block chain by entering 'hodlcoin-qt.exe  -reindex' in a DOS box
Your hodlcoin-qt.exe file can be found under windows in c:\program files\hodlcoin (or the folder where your HodlCoin link points to)

[optiminer]

suprnova pool, optiminer isn't compatible, just checked

I thought suprnova hodl pool was dead

Last we heard from optiminer he said he had shutdown the pool. ( i think it was around the time someone had try'd something with negative timestamps, which is the primary reason we had to create the 3.0.1 wallet ).

Officially we don't really promote pool's, the ANN front page says clearly,
"Mining direct from the wallet is very efficient and is the recommended way of supporting the network."

Having said that there are hodl pools out there...

Optiminer's pool is alive and well as far as I can tell.  I'm still getting blocks from it.

hodl.optiminer.pl has been running smoothly for the last weeks, yes. And suprnova hodl pool was restarted when the requirement to hodl mined coins for a year was removed.

[THX Jedi]

Hi,

Can anyone help, I have u[graded to v3 but my blockchain is not updating, it says I am connected to the network.

but I get the following errors in the log :-

2017-07-08 11:07:57 ERROR: AcceptBlockHeader: block is marked invalid
2017-07-08 11:07:57 ERROR: invalid header received
2017-07-08 11:07:57 ProcessMessages(headers, 178003 bytes) FAILED peer=14

Thanks

hi , welcome to Hodlcoin.
I hope you mean v3.0.1 , it can sometimes help to start the wallet with some known peer node ip addresses who are on v3.0.1 , you can find the list here , http://www.fuzzbawls.pw/explore/HOdlcoin/network.php
push the nodes button next to 3.0.1  and add some of those to your hodlcoin.conf file which is in same dir as your wallet.dat file. Then start your wallet again.

I thanks, I actually needed to start a reindex of my local blockchain, but all up and running now, thanks 

[ghobson]

Hi,

Can anyone help, I have u[graded to v3 but my blockchain is not updating, it says I am connected to the network.

but I get the following errors in the log :-

2017-07-08 11:07:57 ERROR: AcceptBlockHeader: block is marked invalid
2017-07-08 11:07:57 ERROR: invalid header received
2017-07-08 11:07:57 ProcessMessages(headers, 178003 bytes) FAILED peer=14

Thanks

hi , welcome to Hodlcoin.
I hope you mean v3.0.1 , it can sometimes help to start the wallet with some known peer node ip addresses who are on v3.0.1 , you can find the list here , http://www.fuzzbawls.pw/explore/HOdlcoin/network.php
push the nodes button next to 3.0.1  and add some of those to your hodlcoin.conf file which is in same dir as your wallet.dat file. Then start your wallet again.

I thanks, I actually needed to start a reindex of my local blockchain, but all up and running now, thanks 

Glad you found the solution, and happy Hodling.

[FreeTrade]

I was thinking if it's possible for the wallet to autohodl funds received because during holidays I won't be able to access computer for maybe some days or maybe weeks, who knows

Good suggestion! Added as a feature request -

https://github.com/HOdlcoin/HOdlcoin/issues/99

[THX Jedi]

Another newbie question :-

I want to mine on a 2nd PC, can I get it to mine to the same wallet ?

I have tried with the same batch file as PC1 but I seem to get loads of 'Stratum requested work restart' messages

Thanks again   

[M1ST3R]

Another newbie question :-

I want to mine on a 2nd PC, can I get it to mine to the same wallet ?

I have tried with the same batch file as PC1 but I seem to get loads of 'Stratum requested work restart' messages

Thanks again   

Yes you can mine to the same wallet.
Just add this line (without quotation mark) "miningaddress=walletAddressThatYouWantToMineTo" to your hodlcoin.conf file in your ....AppData\Roaming\HOdlcoin  folder.

The wallet should mine to whatever address that you listed.

[THX Jedi]

Another newbie question :-

I want to mine on a 2nd PC, can I get it to mine to the same wallet ?

I have tried with the same batch file as PC1 but I seem to get loads of 'Stratum requested work restart' messages

Thanks again   

Yes you can mine to the same wallet.
Just add this line (without quotation mark) "miningaddress=walletAddressThatYouWantToMineTo" to your hodlcoin.conf file in your ....AppData\Roaming\HOdlcoin  folder.

The wallet should mine to whatever address that you listed.

Thanks for your reply, but....

I don't have a ....AppData\Roaming\HOdlcoin

I have a 'mining' directory from where I run the hodleminer.exe via a simple batch file, and have my wallet installed in a separate directory

I have not tweeked it or optimized it in any way (mainly as I don't know how too), so probably not as efficient as it could be

[M1ST3R]

Another newbie question :-

I want to mine on a 2nd PC, can I get it to mine to the same wallet ?

I have tried with the same batch file as PC1 but I seem to get loads of 'Stratum requested work restart' messages

Thanks again   

Yes you can mine to the same wallet.
Just add this line (without quotation mark) "miningaddress=walletAddressThatYouWantToMineTo" to your hodlcoin.conf file in your ....AppData\Roaming\HOdlcoin  folder.

The wallet should mine to whatever address that you listed.

Thanks for your reply, but....

I don't have a ....AppData\Roaming\HOdlcoin

I have a 'mining' directory from where I run the hodleminer.exe via a simple batch file, and have my wallet installed in a separate directory

I have not tweeked it or optimized it in any way (mainly as I don't know how too), so probably not as efficient as it could be

No problem, just add -miningaddress=walletAddressThatYouWantToMineTo at the end of the hodleminer.exe in the batch file.

e.g.  hodleminer.exe -miningaddress=walletAddressThatYouWantToMineTo

[THX Jedi]

Another newbie question :-

I want to mine on a 2nd PC, can I get it to mine to the same wallet ?

I have tried with the same batch file as PC1 but I seem to get loads of 'Stratum requested work restart' messages

Thanks again   

Yes you can mine to the same wallet.
Just add this line (without quotation mark) "miningaddress=walletAddressThatYouWantToMineTo" to your hodlcoin.conf file in your ....AppData\Roaming\HOdlcoin  folder.

The wallet should mine to whatever address that you listed.

Thanks for your reply, but....

I don't have a ....AppData\Roaming\HOdlcoin

I have a 'mining' directory from where I run the hodleminer.exe via a simple batch file, and have my wallet installed in a separate directory

I have not tweeked it or optimized it in any way (mainly as I don't know how too), so probably not as efficient as it could be

No problem, just add -miningaddress=walletAddressThatYouWantToMineTo at the end of the hodleminer.exe in the batch file.

e.g.  hodleminer.exe -miningaddress=walletAddressThatYouWantToMineTo

Thanks for the info, however, when I add that to my batch file it just crashes, I am sure I am missing something obvious

my batch file is :-

hodlminer.exe -o stratum+tcp://hodl.optiminer.pl:5555 -u <my wallet address> -p x -q

Thanks

[M1ST3R]

Another newbie question :-

I want to mine on a 2nd PC, can I get it to mine to the same wallet ?

I have tried with the same batch file as PC1 but I seem to get loads of 'Stratum requested work restart' messages

Thanks again   

Yes you can mine to the same wallet.
Just add this line (without quotation mark) "miningaddress=walletAddressThatYouWantToMineTo" to your hodlcoin.conf file in your ....AppData\Roaming\HOdlcoin  folder.

The wallet should mine to whatever address that you listed.

Thanks for your reply, but....

I don't have a ....AppData\Roaming\HOdlcoin

I have a 'mining' directory from where I run the hodleminer.exe via a simple batch file, and have my wallet installed in a separate directory

I have not tweeked it or optimized it in any way (mainly as I don't know how too), so probably not as efficient as it could be

No problem, just add -miningaddress=walletAddressThatYouWantToMineTo at the end of the hodleminer.exe in the batch file.

e.g.  hodleminer.exe -miningaddress=walletAddressThatYouWantToMineTo

Thanks for the info, however, when I add that to my batch file it just crashes, I am sure I am missing something obvious

my batch file is :-

hodlminer.exe -o stratum+tcp://hodl.optiminer.pl:5555 -u <my wallet address> -p x -q

Thanks

It should be   hodlminer.exe -o stratum+tcp://hodl.optiminer.pl:5555 -u <my wallet address> -p x

Also optiminer uses AES and AVX2. Be sure your cpu support them; otherwise, the miner will crash.

[niksdt101]

mining is going on well. we need more momentum to bring hodl up again. so that it reaches last year's value!!!

[wisebc]

Question from a HODL-beginner (but meanwhile # 2 on http://hodl.optiminer.pl/) 

I am mining on a Windows10 PC in a DOS-Window using the hodlminer-optiminer-fork.zip (http://cryptomining-blog.com/8196-new-faster-hodlminer-and-a-new-mining-pool-for-it-now-available/)
I installed the HOdlcoin Core - Wallet (HOdlcoin Core Version v3.0.1 (64-Bit)).

I mined and transfered 50 this morning. I transfered the "Principal"() to my Deposit.

Since then I mined further and now, the mining-stats say:

• balance:      58.583
• pending balance:   3.041
• pending payout:   0.000

In the Wallet-Overview there are those informations:

LEFT SIDE / Balances

• Available:   0.00040328 HODL
• Pending:   0.00000000 HODL
• Immature:   75.49408949 HODL
• Total:      75.49449277 HODL
• Available:   0.00040328

RIGHT SIDE / Recent transactions

• 13.07.17 09:21 +49.99998840 HODL (received with my HODLadress ...)
• 13.07.17 09:21 +0.00040325 (HODL-Adress I dont know)
• 13.07.17 05:15 +50.00000000 (Mined Confirmed 310 confimations)

BOTTOM / HOdlings (only one row)

• Status         HOdled
• Principal      49.99998840
• Accrued Interest   0.00822637
• Accrued Value   50.00822637
• On Maturation   75.49473154
• Term (Days)      365
• Deposit Block   0281625
• Maturation Block   0486391
• Estimated Date   2018/07/13

MY QUESTIONS:
1. The requirement for a payout? I thought: Balance >=50 then payout
2. After a payout I need 21 confirmations before the mined 50 (Blocks/HODLES???) are transfered to my pending balance?
3. After each payout I have to transfer the pending amount to my deposit?

Optiminer's pool pays out using the structure created when everything you mined was automatically hodl'ed for 1 year in your wallet.  So, when your balance reaches 50 hodl, you 'get in line' with anyone else who has a balance of 50 or more, and when it is your turn an entire block (50 hodl) is mined to your address, thus paying you 50 hodl.  Now, since the last fork, mined coins don't autohodl, so yes, you will have to manually deposit anything that you want to HODL in a term deposit in your wallet.

[xryan]

Can't sync, anyone having the same problem.
Stuck at 278862

make sure to use v3.0.1 , you may need to start with -reindex flag
takes about 45 mins to rebuild the block index ( this does not redownload the blockchain )

 you may need to start with -reindex flag, what does that mean ?!?!

You can start a reindex of your local block chain by entering 'hodlcoin-qt.exe  -reindex' in a DOS box
Your hodlcoin-qt.exe file can be found under windows in c:\program files\hodlcoin (or the folder where your HodlCoin link points to)

Reindexing worked fine. I ran the solomining with my laptop (67 H/S) and got 3700 Hodl after one day. The last time I mined was a couple of months back and I got mayb 50 Hold/day. Any explanation?

[M1ST3R]

Can't sync, anyone having the same problem.
Stuck at 278862

make sure to use v3.0.1 , you may need to start with -reindex flag
takes about 45 mins to rebuild the block index ( this does not redownload the blockchain )

 you may need to start with -reindex flag, what does that mean ?!?!

You can start a reindex of your local block chain by entering 'hodlcoin-qt.exe  -reindex' in a DOS box
Your hodlcoin-qt.exe file can be found under windows in c:\program files\hodlcoin (or the folder where your HodlCoin link points to)

Reindexing worked fine. I ran the solomining with my laptop (67 H/S) and got 3700 Hodl after one day. The last time I mined was a couple of months back and I got mayb 50 Hold/day. Any explanation?

Most likely you're  on  a wrong chain.  Are you using wallet v3.0.1?  Check your balance using the block explorer.
Here the link... http://www.fuzzbawls.pw/explore/HOdlcoin/index.php

[ugofoscolo19]

found my first block in solo!! With just a I5-4200U dual core!! I am so lucky!!