giagge
Legendary
Offline
Activity: 1134
Merit: 1001
|
|
June 17, 2016, 06:35:40 AM |
|
I want to try with my GTX 950 OC . what i write in the .bat ? The best mining pool ? Thanks! .
|
|
|
|
Rimtu
Newbie
Offline
Activity: 44
Merit: 0
|
|
June 17, 2016, 07:52:17 AM |
|
that would be awsome lololol, only if computers have a REALLY GOOD videocards Gtx 670.. they hash around 13.7MHs... and there are 8 of them... That is very good performance. 670 is a very old card. Maybe their memory bandwidth is quite high to have such high speed. Apparently it can do even better with slight OC. https://bitcointalk.org/index.php?topic=1368785.msg15236264#msg15236264Each PC is around 160w at the wall when mining. But my electric cost is included in rent... so I doesn't bother me....
|
|
|
|
Genoil (OP)
|
|
June 17, 2016, 12:46:36 PM |
|
1.1.5 is out. Adds support for nicehash stratum (add -ES flag), as well as a third option to load DAGs. This is only supported on CUDA for the time being. It allows you to generate the DAG on 1 GPU and then distribute it via system RAM to the other GPUs. Usage: -L single <n>, where <n> is the GPU ID. As I don't have a dev system with multiple OpenCL GPU's on the same platform, I can't currently port this to OpenCL.
This work has all been done by nicehash themselves, thank you!
It kind of paves the way for supporting more stratum variants, so -ES wil probably change into -SM <s> in an upcoming release.
|
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW
|
|
|
sorry2xs
Legendary
Offline
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
|
|
June 17, 2016, 12:49:29 PM |
|
so how can i download it
|
Please tip the Node 1MPWKB23NsZsXHANnFwVAWT86mL24fqAjF; KO4UX THAT NO GOOD DO GOODER BAT!!!
|
|
|
kenshirothefist
|
|
June 17, 2016, 01:05:16 PM |
|
so how can i download it As always: https://github.com/Genoil/cpp-ethereum/tree/110/releasesRegarding this: generate the DAG on 1 GPU and then distribute it via system RAM to the other GPUs. Usage: -L single <n>, where <n> is the GPU ID Please note that if you have multiple different GPUs, choose the fastest one with -L <n> ... this will make sure DAG will be generated as fast as possible and will be even faster distributed to other GPUs via system memory. Keep on mining
|
|
|
|
sorry2xs
Legendary
Offline
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
|
|
June 17, 2016, 01:14:37 PM |
|
so how can i download it As always: https://github.com/Genoil/cpp-ethereum/tree/110/releasesRegarding this: generate the DAG on 1 GPU and then distribute it via system RAM to the other GPUs. Usage: -L single <n>, where <n> is the GPU ID Please note that if you have multiple different GPUs, choose the fastest one with -L <n> ... this will make sure DAG will be generated as fast as possible and will be even faster distributed to other GPUs via system memory. Keep on mining Thanks
|
Please tip the Node 1MPWKB23NsZsXHANnFwVAWT86mL24fqAjF; KO4UX THAT NO GOOD DO GOODER BAT!!!
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
June 17, 2016, 01:20:06 PM |
|
mmh experiencing a crash on the first gpu with the last release, when the gpu are creating the dag file
|
|
|
|
Genoil (OP)
|
|
June 17, 2016, 01:34:25 PM |
|
mmh experiencing a crash on the first gpu with the last release, when the gpu are creating the dag file
With -L single 0? Or with defaults?
|
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW
|
|
|
drhash
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 17, 2016, 01:59:32 PM |
|
what about gpu overheat command?when you implement this command?Genoil?
|
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
June 17, 2016, 02:20:13 PM |
|
mmh experiencing a crash on the first gpu with the last release, when the gpu are creating the dag file
With -L single 0? Or with defaults? defaults setting
|
|
|
|
Genoil (OP)
|
|
June 17, 2016, 04:05:22 PM |
|
mmh experiencing a crash on the first gpu with the last release, when the gpu are creating the dag file
With -L single 0? Or with defaults? defaults setting CUDA or CL? Can you consistently crash it?
|
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
June 17, 2016, 04:21:29 PM |
|
mmh experiencing a crash on the first gpu with the last release, when the gpu are creating the dag file
With -L single 0? Or with defaults? defaults setting CUDA or CL? Can you consistently crash it? cuda, yes it happen each time unless i reduce the overclock, so maybe is that the issue? but it was not the case with the previous version
|
|
|
|
Genoil (OP)
|
|
June 17, 2016, 04:24:52 PM |
|
mmh experiencing a crash on the first gpu with the last release, when the gpu are creating the dag file
With -L single 0? Or with defaults? defaults setting CUDA or CL? Can you consistently crash it? cuda, yes it happen each time unless i reduce the overclock, so maybe is that the issue? but it was not the case with the previous version That's weird because nothing changed in the default DAG load code. Does it help when you set --cuda-grid-size 2048?
|
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW
|
|
|
bensam1231
Legendary
Offline
Activity: 1764
Merit: 1024
|
|
June 17, 2016, 05:55:05 PM |
|
1.1.5 is out. Adds support for nicehash stratum (add -ES flag), as well as a third option to load DAGs. This is only supported on CUDA for the time being. It allows you to generate the DAG on 1 GPU and then distribute it via system RAM to the other GPUs. Usage: -L single <n>, where <n> is the GPU ID. As I don't have a dev system with multiple OpenCL GPU's on the same platform, I can't currently port this to OpenCL.
This work has all been done by nicehash themselves, thank you!
It kind of paves the way for supporting more stratum variants, so -ES wil probably change into -SM <s> in an upcoming release.
That sounds neat. Guessing it's a better version of the one dag per GPU sequential load that was in place before. Is there anyway to add a verify after generation for those of us with OC'd systems so it can check for corruption in the DAG generation phase? Also curiously why is it loaded to system memory instead of just transferring right from one GPU to another?
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
Genoil (OP)
|
|
June 17, 2016, 06:08:59 PM |
|
1.1.5 is out. Adds support for nicehash stratum (add -ES flag), as well as a third option to load DAGs. This is only supported on CUDA for the time being. It allows you to generate the DAG on 1 GPU and then distribute it via system RAM to the other GPUs. Usage: -L single <n>, where <n> is the GPU ID. As I don't have a dev system with multiple OpenCL GPU's on the same platform, I can't currently port this to OpenCL.
This work has all been done by nicehash themselves, thank you!
It kind of paves the way for supporting more stratum variants, so -ES wil probably change into -SM <s> in an upcoming release.
That sounds neat. Guessing it's a better version of the one dag per GPU sequential load that was in place before. Is there anyway to add a verify after generation for those of us with OC'd systems so it can check for corruption in the DAG generation phase? Also curiously why is it loaded to system memory instead of just transferring right from one GPU to another? Device 2 device would be nice indeed. Noted A DAG verification check wouldn't be too difficult to add. Sounds useful too.
|
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW
|
|
|
clintar2
|
|
June 17, 2016, 07:37:14 PM |
|
1.1.5 is out. Adds support for nicehash stratum (add -ES flag), as well as a third option to load DAGs. This is only supported on CUDA for the time being. It allows you to generate the DAG on 1 GPU and then distribute it via system RAM to the other GPUs. Usage: -L single <n>, where <n> is the GPU ID. As I don't have a dev system with multiple OpenCL GPU's on the same platform, I can't currently port this to OpenCL.
This work has all been done by nicehash themselves, thank you!
It kind of paves the way for supporting more stratum variants, so -ES wil probably change into -SM <s> in an upcoming release.
Using the miner WITHOUT -ES gives ℹ 13:24:25|openclminer0 Solution found; Submitting to blah ... ✘ 13:24:25|openclminer0 Exception thrown in Worker thread: basic_string::substr which is caused by the string minernonce = solution.nonce.hex().substr(m_extraNonceHexSize, 16 - m_extraNonceHexSize); in libstratum/EthStratumClient.cpp I just put that code behind the if (!m_ethereumStratum) block like so string minernonce; if (!m_ethereumStratum) cnote << " Nonce:" << "0x" + solution.nonce.hex(); else minernonce = solution.nonce.hex().substr(m_extraNonceHexSize, 16 - m_extraNonceHexSize); to get it to work, fyi.
|
|
|
|
Genoil (OP)
|
|
June 17, 2016, 07:47:18 PM |
|
Thanks, I didn't encounter that during my own tests.
|
ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d BTC: 1Nu2fMCEBjmnLzqb8qUJpKgq5RoEWFhNcW
|
|
|
clintar2
|
|
June 17, 2016, 08:16:57 PM |
|
Thanks, I didn't encounter that during my own tests.
The same code appears in the EthStratumClientV2.cpp file, too, but I don't think the problem showed in there, but my memory might be backwards on that.
|
|
|
|
jstefanop
Legendary
Offline
Activity: 2162
Merit: 1401
|
|
June 17, 2016, 08:47:17 PM |
|
Thanks, I didn't encounter that during my own tests.
can you push the fix to that to your repo?
|
|
|
|
davembg
Sr. Member
Offline
Activity: 340
Merit: 251
Smell the glove.
|
|
June 17, 2016, 10:41:50 PM |
|
Thanks, I didn't encounter that during my own tests.
I'm getting a segfault when trying to use the new NiceHash stratum feature. ethminer -G -ES -SV 2 -S daggerhashimoto.usa.nicehash.com:3353 -O 1HtkaiWKeKZ6MJgag6a3fUQo3BxcT2gAKv.amdo:x Genoil's ethminer 0.9.41-genoil-1.1.5 ===================================================================== Forked from github.com/ethereum/cpp-ethereum CUDA kernel ported from Tim Hughes' OpenCL kernel With contributions from nicehash, nerdralph, RoBiK and sp_
Please consider a donation to: ETH: 0xeb9310b185455f863f526dab3d245809f6854b4d
[OPENCL]:Found suitable OpenCL device [Hawaii] with 8443591744 bytes of GPU memory ℹ 14:58:29|stratum Connecting to stratum server daggerhashimoto.usa.nicehash.com:3353 ℹ 14:58:29|stratum Connected! ℹ 14:58:29|stratum Starting farm ℹ 14:58:30|stratum Subscribed to stratum server ℹ 14:58:30|stratum Extranonce set to 02dd70 ℹ 14:58:30|stratum Difficulty set to 0.05 ℹ 14:58:30|stratum Received new job #000000070aefbb6f ℹ 14:58:30|openclminer0 set work; seed: #a1cf1239, target: #00000013ffec ℹ 14:58:30|openclminer0 Initialising miner... ℹ 14:58:30|openclminer1 set work; seed: #a1cf1239, target: #00000013ffec ℹ 14:58:30|openclminer1 Initialising miner... ℹ 14:58:30|stratum Authorized worker 1HtkaiWKeKZ6MJgag6a3fUQo3BxcT2gAKv.amdo ℹ 14:58:30|openclminer2 set work; seed: #a1cf1239, target: #00000013ffec ℹ 14:58:30|openclminer2 Initialising miner... m 14:58:31|ethminer Mining on PoWhash #d59c2ff3 : 0.00MH/s [A0+0:R0+0:F0] [OPENCL]:Using platform: AMD Accelerated Parallel Processing [OPENCL]:Using platform: AMD Accelerated Parallel Processing [OPENCL]:[OPENCL]:Using device: Hawaii(OpenCL 2.0 AMD-APP (1912.5)) [OPENCL]:Using device: Hawaii(OpenCL 2.0 AMD-APP (1912.5)) Using platform: AMD Accelerated Parallel Processing [OPENCL]:Using device: Hawaii(OpenCL 2.0 AMD-APP (1912.5)) m 14:58:33|ethminer Mining on PoWhash #d59c2ff3 : 0.00MH/s [A0+0:R0+0:F0] Segmentation fault (core dumped)
|
|
|
|
|