RichBC
|
|
November 16, 2016, 08:59:03 PM |
|
Very nice indeed/Unfortunately my miner offline again and can't get over there until Friday. Need to look at the Cron Job ore pehaps just put in a mains timer to reboot every 24 Hours?
Rich
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
November 16, 2016, 09:42:20 PM |
|
Very nice indeed/Unfortunately my miner offline again and can't get over there until Friday. Need to look at the Cron Job ore pehaps just put in a mains timer to reboot every 24 Hours?
Rich
Hey Rich, great to see you here back again ! @your Ant: No prob, hope you fixed that issue on friday Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
vincku
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 18, 2016, 10:25:32 PM |
|
Hello Guys,
I made all the mistakes possible, but I eventually managed to get one of these R1 from Bitmain China back in my home. Apparently, it has been mining on the Antpool in forced solo mode for a bit less than 24 hours, although their web interface is not so clear to me.
I have been reading a lot about this antrouter on the internet. And, of course, this thread on the Bitcoin forum.
Don't feel obliged to answer but... If you had to convince me to join your pool, what would be your top 3 arguments ? Keep 2 more in your sleeves, just in case.
Thank you,
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
November 18, 2016, 11:04:56 PM |
|
Hello Guys,
I made all the mistakes possible, but I eventually managed to get one of these R1 from Bitmain China back in my home. Apparently, it has been mining on the Antpool in forced solo mode for a bit less than 24 hours, although their web interface is not so clear to me.
I have been reading a lot about this antrouter on the internet. And, of course, this thread on the Bitcoin forum.
Don't feel obliged to answer but... If you had to convince me to join your pool, what would be your top 3 arguments ? Keep 2 more in your sleeves, just in case.
Thank you,
Hi vincku, don´t hesitate to spread out your questions, you are welcome . You´re asking for arguments to joining our pool? It´s hard, but also very easy to explain : 1. like you know, it´s a lotto pool (but note, its not our pool, it´s the ckpool from the legendary developer of cgminer!), so you are able to get the chance to find a block 2. we provide the api and the gui for it (antrun.de and gekkorun.de) so you can compare your results with other competitors 3. (and thats even more important): you´re joining a group of enthusiast people around the world, who wants to support, to discuss and discover all about mining and all related topics about it. 4. the most important goal is to having fun and a enriching exchange of ideas with other forum members 5. Thats all Don´t forget: If you want to join us, first of all you have to flash the custom firmware to join the pool and our community. If any questions feel free to ask us.. Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
vincku
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 19, 2016, 01:19:31 PM |
|
Thank you andY.
I used CGminer to mine Litecoins 2 years ago. I actually bought a R1 after I read this thread, because of this fun community. The Antpool is big enough. I believe in decentralization. I also live in Europe. Why should I be mining for the Chinese ?
Once I flash the firmware, will the R1 still run autonomously ? From 1 to 10, is it easy to do ? Can i go back if it does not work ?
As part as my hobby project, I may adding a U3 unit to my R1 next year, will I still be able to stay in this community ?
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
November 20, 2016, 11:32:49 AM |
|
Thank you andY.
I used CGminer to mine Litecoins 2 years ago. I actually bought a R1 after I read this thread, because of this fun community. The Antpool is big enough. I believe in decentralization. I also live in Europe. Why should I be mining for the Chinese ?
Once I flash the firmware, will the R1 still run autonomously ? From 1 to 10, is it easy to do ? Can i go back if it does not work ?
As part as my hobby project, I may adding a U3 unit to my R1 next year, will I still be able to stay in this community ?
Hi vincku, Once I flash the firmware, will the R1 still run autonomously ? yes, you don´t wired only to the antpool, after flashing the CFW, you´r able to choose your prefered pool . (After flashing, the R1 works also autonomously of course!) Can i go back if it does not work ? If you decide to fall back to default, it´s very easy. You only have to press the R1 Reset button, after than it´s factory resetted. From 1 to 10, is it easy to do ? Not sure, what you want to ask ? Pls explain . As part as my hobby project, I may adding a U3 unit to my R1 next year, will I still be able to stay in this community ? Yes, of course, mate . But you should create a separate worker name for your U3, so it´s excluded from our competition , ´cause only R1 or GekkoMiner are permitted in our race. Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
vincku
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 20, 2016, 06:18:16 PM Last edit: November 20, 2016, 07:58:16 PM by vincku |
|
I made the switch. With the help of a friend. Flashed the firmware. Set up a receiving bitcoin address. Pointed it to de.ckpool.org:3333 stratum. We were not quite sure how to attach a worker name to it. So I just added it in after my receiving address, with a _. What is the next step to register on Antrun.de ?
Anyway, here is my info:
Username: Vincku Country-Code: FR BTC Worker: 1KDSqFYfnBxbqDwrkDHoy3CN4mcQTyEM7V_Vincku
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
November 21, 2016, 10:48:53 AM |
|
I made the switch. With the help of a friend. Flashed the firmware. Set up a receiving bitcoin address. Pointed it to de.ckpool.org:3333 stratum. We were not quite sure how to attach a worker name to it. So I just added it in after my receiving address, with a _. What is the next step to register on Antrun.de ?
Anyway, here is my info:
Username: Vincku Country-Code: FR BTC Worker: 1KDSqFYfnBxbqDwrkDHoy3CN4mcQTyEM7V_Vincku
Hi Vincku, great, so I´ll add you asap. Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
vincku
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 21, 2016, 12:09:36 PM |
|
Thank you andY! Looking forward to be part of this very closed circle Let me know if there are any issues.
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
November 21, 2016, 12:59:05 PM |
|
Thank you andY! Looking forward to be part of this very closed circle Let me know if there are any issues. Hi vincku,thanks for joining! You´re added now . If any questions, feel free to ask me (or the community of course) . Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
stefan9
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 23, 2016, 04:09:07 AM |
|
Username: stefan9 Country-Code: US BTC Worker: 1LvqyRKXXC3fS5qhsi326Au6H5V93hwyWZ_R1
thanks
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
November 23, 2016, 11:10:09 AM |
|
Username: stefan9 Country-Code: US BTC Worker: 1LvqyRKXXC3fS5qhsi326Au6H5V93hwyWZ_R1
thanks
Hi stefan9, thanks for joining our community. You´re added now, have fun . You can adjust your ASIC-frequency (default 100MHz) by yourself. Go to -> "Change your frequency" on our website, insert your BTC-Adress_Worker and choose the proper value. If any questions, feel free to ask us. Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
vincku
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 23, 2016, 09:17:07 PM |
|
I pushed my R1 to 125.00 MHz and disabled the wifi network to make sure it has enough power. Temperature is still stable at 40 degrees C. I updated the info on the website. Now checking data to see if I increased my hashrate. Welcome onboard stefan9.
|
|
|
|
Real-Duke
Legendary
Offline
Activity: 3514
Merit: 2303
Top Crypto Casino
|
|
November 24, 2016, 12:07:49 PM |
|
Try to push the little ant to 137,5 As far as I can see nobody is in trouble with this frequency
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
November 24, 2016, 12:40:15 PM |
|
I pushed my R1 to 125.00 MHz and disabled the wifi network to make sure it has enough power. Temperature is still stable at 40 degrees C. I updated the info on the website. Now checking data to see if I increased my hashrate. You could drive an USB powered Flex-Fan, (e.g. Arctic) on the R1´s USB-Port to cool down your R1 Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
vincku
Newbie
Offline
Activity: 19
Merit: 0
|
|
November 25, 2016, 06:42:02 PM Last edit: November 25, 2016, 10:00:49 PM by vincku |
|
I am trying to keep it working with low electricity. Adding a fan would make some noise and the cat would not like it.
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
November 25, 2016, 10:32:53 PM |
|
I am trying to keep it working with low electricity. Adding a fan would make some noise and the cat would not like it. Arctic fans, are very very silent, and be sure, your cat will LOVE IT !! Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
|
andymanone
Sr. Member
Offline
Activity: 432
Merit: 250
Save the past & use the future ©
|
|
December 01, 2016, 10:02:27 AM |
|
Welcome, Highground, thanks for joining . You´re added now. If any question feel free to ask me or our team. Have fun ! Cheers, andY
|
#Compare your share!# Join the community and be a member of http://www.gekkorun.de today! Open for all Antrouter R1, Gekkoscience Compac, 2PAC and sidehack´s coming soon Bitfury Asic Miners! Notice: gekkorun 2.0 goes offline in 10/07/18 (and will be not longer supported anymore) My previous ANTR1/Gekko Tuning success: Ant R1=500MHz@0.96V@27,66GH/s / Gekko=475MHz@0.9V /stable 450MHz/0.88V@23,78GH/s
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
December 01, 2016, 12:18:40 PM |
|
guys... since ck is testing the segwit signalling for the pool at port 13333, I think we should support him by changing to that pool temporary pool... once completed, we actually dont need to do anything as he will redirect all miners back to main pool. extracted from his thread.... ".... I've put up a separate pool instance for people brave enough to test it that would prefer to help signal support for segwit for the time being. This will be temporary and comes without any guarantee, even though I've since confirmed I found the bug with the previous code. I'd appreciate it some are brave enough to mine on it instead of the current pool as a show of support. I'm pretty sure you will end up with a block if you find one. Pool is at stratum+tcp://solo.ckpool.org: 13333Stats at pool2 version of regular pool http://solo.ckpool.org/pool2http://solo.ckpool.org/users2/http://solo.ckpool.org/workers2/It is on the same server as the existing solo pool so comes with all the same performance and benefits...."
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
|