⚡[ANN]⚡ ▐░Espers [ESP]░▌▐░PoW/PoS░▌▐░HMQ1725 Algo░▌ ▐░New Features░▌

[Nicolasbonza]

Trade ESP for GPU Coin or Trade GPU for ESP Happy trading guys

https://www.novaexchange.com/market/ESP_GPU/

Trading is quite low and the price is not that good, its better to trade ESP for LTC at the moment. The exchange too cannot be trusted yet.

Is the Yobit a good exchange? if not, where can i trade ESP for LTC?

[darkagentx]

Trade ESP for GPU Coin or Trade GPU for ESP Happy trading guys

https://www.novaexchange.com/market/ESP_GPU/

Trading is quite low and the price is not that good, its better to trade ESP for LTC at the moment. The exchange too cannot be trusted yet.

Is the Yobit a good exchange? if not, where can i trade ESP for LTC?

I do not recommend trading on Yobit since it has a lot of issues on wallet getting stuck or almost the coin wallets there are under maintenance and it takes months for them to be resolved.

https://www.cryptopia.co.nz/Exchange/?market=ESP_LTC

[white92d15b7]

Nova is back on track, they are here to stay.  Price is awsome on Nova, what else are you going to do with your espers?

[darkagentx]

Nova is back on track, they are here to stay.  Price is awsome on Nova, what else are you going to do with your espers?

We hold them and trade them for a better price. You sure know the hidden gem on Espers and if not why waste your time posting here on this thread?
Price is not awesome on novaexchange , please do not promote it that much here.

[.cryptic.]

Nova is back on track, they are here to stay.  Price is awsome on Nova, what else are you going to do with your espers?

Only if they pay back the scammed coins to their previous customers.
To me this is still a scammy exchange and I will avoid it at all cost.

[SHP-YTC]

someone can compile for windows

Miners have already been compiled for windows

Here is a direct download URL for the windows binaries of the older miner:  >>>LINK HERE<<<

and the new one is >>>HERE<<<

I tested sgminer_build_hmq1725_b4 on Win7 64bit.
Works without any problems for me.

7950 ~ 1,3 MHs
7850 ~ 880 KHs
R7 370 ~ 1,1 MHs

On Win 8.1 with a 7850 the miner crashes. Don´t know why but will a have a look tomorrow.

I finally finished my new website, specifically for ESP mining hardware comparison.

Please check it out : http://esp-setup.weebly.com/


If you're interested to add your setup, you'll be rewarded with 5.000 ESP.
You can use the contact form on the site or this Google Spreadsheet:

https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0
 
Please share and repost if you like this idea

Best regards

Can you add my configuration?

Hardware: Sapphire ATI Radeon R9 270 2GB DDR5 256B 11220-00-20G (1x)
.BAT file configuration: sgminer.exe --kernel hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.3 -p x -I 16
Hashrate: 392kH/s
Software: sgminer-5-1-1-hmq1725 on Windows 10 Pro 64 bits

Hardware: Intel core I5-4670 (1x)
.BAT file configuration: cpuminer -a hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.2 -p x -q
Hashrate: 100kH/s
Software: cpuminer-hmq1725-win64 on Windows 10 Pro 64 bits

Edit: i added my configuration on this link: https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0

I've added 2 more configurations to this link:

https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0

Hardware: Intel Core i3 M380 (1x)
.BAT file configuration: cpuminer -a hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.2 -p x -q
Hashrate: 29 kH/s
Software: cpuminer-hmq1725-win64 on Windows 7 Ultimate 64 bits

And

Hardware: Intel Pentium G620
.BAT file configuration: cpuminer -a hmq1725 -o stratum+tcp://esp.suprnova.cc:3451 -u nicolasbonza.2 -p x -q
Hashrate: 25 kH/s
Software: cpuminer-hmq1725-win64 on Windows 10 Home Single Language 64 bits

My esp wallet address: EeoFKkVD5yDDiZq68sGebRxX5SHvEKhsr2

Thanks a lot! I'll send you the ESP as soon as I get access to my mining rig.
Best regards

[pallas]

For the people still stuck with the old miner, I've just submitted a 10% speedup.
You don't need to wait for a new build: just replace the hmq1725.cl file with this one:

https://raw.githubusercontent.com/pallas1/sgminer_HMQ1725/c56f22f84ec504b985862195b4dd9f4f2f9a16ff/kernel/hmq1725.cl

Remove all the bin files and you are ready to go!

Thank you so much!  
but how to compile this kind of file?
i'll try with the windows notepad

edit: it worked but with no increase of the hashrate performance

did you remove the old .bin files?

[Nicolasbonza]

For the people still stuck with the old miner, I've just submitted a 10% speedup.
You don't need to wait for a new build: just replace the hmq1725.cl file with this one:

https://raw.githubusercontent.com/pallas1/sgminer_HMQ1725/c56f22f84ec504b985862195b4dd9f4f2f9a16ff/kernel/hmq1725.cl

Remove all the bin files and you are ready to go!

Thank you so much!  
but how to compile this kind of file?
i'll try with the windows notepad

edit: it worked but with no increase of the hashrate performance

did you remove the old .bin files?

Yes i did, my hashrate with the normal .CL file is 392kh/s and with your .CL file it was 340kH/s

[pallas]

For the people still stuck with the old miner, I've just submitted a 10% speedup.
You don't need to wait for a new build: just replace the hmq1725.cl file with this one:

https://raw.githubusercontent.com/pallas1/sgminer_HMQ1725/c56f22f84ec504b985862195b4dd9f4f2f9a16ff/kernel/hmq1725.cl

Remove all the bin files and you are ready to go!

Thank you so much!  
but how to compile this kind of file?
i'll try with the windows notepad

edit: it worked but with no increase of the hashrate performance

did you remove the old .bin files?

Yes i did, my hashrate with the normal .CL file is 392kh/s and with your .CL file it was 340kH/s

try to play with worksize and gpu threads.
besides, I wrote the original .cl file as well.

[Nicolasbonza]

For the people still stuck with the old miner, I've just submitted a 10% speedup.
You don't need to wait for a new build: just replace the hmq1725.cl file with this one:

https://raw.githubusercontent.com/pallas1/sgminer_HMQ1725/c56f22f84ec504b985862195b4dd9f4f2f9a16ff/kernel/hmq1725.cl

Remove all the bin files and you are ready to go!

Thank you so much!  
but how to compile this kind of file?
i'll try with the windows notepad

edit: it worked but with no increase of the hashrate performance

did you remove the old .bin files?

Yes i did, my hashrate with the normal .CL file is 392kh/s and with your .CL file it was 340kH/s

try to play with worksize and gpu threads.
besides, I wrote the original .cl file as well.

I've tried -w 64 -g 2  and it is 210kH/s  
edit: Now i tried with -w 256 and it is 400kh/s but it is not stable

[pallas]

For the people still stuck with the old miner, I've just submitted a 10% speedup.
You don't need to wait for a new build: just replace the hmq1725.cl file with this one:

https://raw.githubusercontent.com/pallas1/sgminer_HMQ1725/c56f22f84ec504b985862195b4dd9f4f2f9a16ff/kernel/hmq1725.cl

Remove all the bin files and you are ready to go!

Thank you so much!  
but how to compile this kind of file?
i'll try with the windows notepad

edit: it worked but with no increase of the hashrate performance

did you remove the old .bin files?

Yes i did, my hashrate with the normal .CL file is 392kh/s and with your .CL file it was 340kH/s

try to play with worksize and gpu threads.
besides, I wrote the original .cl file as well.

I've tried -w 64 -g 2  and it is 210kH/s   

what card? did you try using the old .cl again and see if the results are consistent?

[Nicolasbonza]

For the people still stuck with the old miner, I've just submitted a 10% speedup.
You don't need to wait for a new build: just replace the hmq1725.cl file with this one:

https://raw.githubusercontent.com/pallas1/sgminer_HMQ1725/c56f22f84ec504b985862195b4dd9f4f2f9a16ff/kernel/hmq1725.cl

Remove all the bin files and you are ready to go!

Thank you so much!  
but how to compile this kind of file?
i'll try with the windows notepad

edit: it worked but with no increase of the hashrate performance

did you remove the old .bin files?

Yes i did, my hashrate with the normal .CL file is 392kh/s and with your .CL file it was 340kH/s

try to play with worksize and gpu threads.
besides, I wrote the original .cl file as well.

I've tried -w 64 -g 2  and it is 210kH/s   

what card? did you try using the old .cl again and see if the results are consistent?

it's a r9 270, i did and the hashrate was normal

[Simple858]

Why is there no Available Supply on coinmarketcap!? We would gain some position on marketcap and visibility?! 

[pallas]

For the people still stuck with the old miner, I've just submitted a 10% speedup.
You don't need to wait for a new build: just replace the hmq1725.cl file with this one:

https://raw.githubusercontent.com/pallas1/sgminer_HMQ1725/c56f22f84ec504b985862195b4dd9f4f2f9a16ff/kernel/hmq1725.cl

Remove all the bin files and you are ready to go!

Thank you so much!  
but how to compile this kind of file?
i'll try with the windows notepad

edit: it worked but with no increase of the hashrate performance

did you remove the old .bin files?

Yes i did, my hashrate with the normal .CL file is 392kh/s and with your .CL file it was 340kH/s

try to play with worksize and gpu threads.
besides, I wrote the original .cl file as well.

I've tried -w 64 -g 2  and it is 210kH/s   

what card? did you try using the old .cl again and see if the results are consistent?

it's a r9 270, i did and the hashrate was normal

I'm sorry sir I do not have that card to test with.
Maybe the old .cl file is better for cards smaller than a 280x.

[Nicolasbonza]

For the people still stuck with the old miner, I've just submitted a 10% speedup.
You don't need to wait for a new build: just replace the hmq1725.cl file with this one:

https://raw.githubusercontent.com/pallas1/sgminer_HMQ1725/c56f22f84ec504b985862195b4dd9f4f2f9a16ff/kernel/hmq1725.cl

Remove all the bin files and you are ready to go!

Thank you so much!  
but how to compile this kind of file?
i'll try with the windows notepad

edit: it worked but with no increase of the hashrate performance

did you remove the old .bin files?

Yes i did, my hashrate with the normal .CL file is 392kh/s and with your .CL file it was 340kH/s

try to play with worksize and gpu threads.
besides, I wrote the original .cl file as well.

I've tried -w 64 -g 2  and it is 210kH/s  

what card? did you try using the old .cl again and see if the results are consistent?

it's a r9 270, i did and the hashrate was normal

I'm sorry sir I do not have that card to test with.
Maybe the old .cl file is better for cards smaller than a 280x.

I'm going to test it on Ubuntu
edit:
[11:01:52] WARNING: GPU_USE_SYNC_OBJECTS is not specified!
[11:01:52] Probing for an alive pool
[11:01:54] Startup GPU initialization... Using settings from pool Suprnova ESP.
[11:01:54] Startup Pool No = 0
[11:01:54] Building binary hmq1725Pitcairngw64l8ku0.bin
[11:02:33] Initialising kernel hmq1725.cl with nfactor 10, n 1024
[11:02:33] Error -46: Creating ExtraKernel #0 from program. (clCreateKernel)
[11:02:33] Failed to init GPU thread 0, disabling device 0
[11:02:33] Restarting the GPU from the menu will not fix this.
[11:02:33] Re-check your configuration and try restarting.
Press enter to continue:

[11:02:43] thread_prepare failed for thread 0Segmen

and the Error -63 with the wolf miner

[bluedude]

Whats the next big feature for ESP?

[den5221]

Heard nothing for a long time.
Think they are doning nothing

[SHP-YTC]

Whats the next big feature for ESP?

You can contribute by adding your mining setup to this list :
https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0

Regards

[JogerMax]

Can somebody help me with the error i'm getting in Wolf0's miner  

no errors - it`s working (hw`s are still present, but who cares...)
http://www.imageup.ru/img145/thumb/esper2482203.jpg

Hello there!
Would please add your mining setup to this list?
5.000 ESP reward will be waiting for you

https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0

Best regards

Done, right now. How do i get the 5,000 Espers?

[SHP-YTC]

Can somebody help me with the error i'm getting in Wolf0's miner  

no errors - it`s working (hw`s are still present, but who cares...)

Hello there!
Would please add your mining setup to this list?
5.000 ESP reward will be waiting for you

https://docs.google.com/spreadsheets/d/1KQKkW-j8VI_ag4Sr4ZvzkCXFsHDbrn78VY4Kvjdfm2k/edit#gid=0

Best regards

Done, right now. How do i get the 5,000 Espers?

I need a valid ESP adress and I'll send you 5k ESP.
 I will figure out a more "elegant" solution in the near future to have an automated system on my website http://esp-setup.weebly.com/.