Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order

[philipma1957]

can somebody tell me what wrong with my S9 miner?? Just run for one month. Can I fix it at home??? please help me

Looks like a board gave up. Try power cycle it, see if it comes back.

do you mean restart the miner???

Yes, unplug it, wait a couple of mins, plug it back again. Maybe save the kernel log if you haven't rebooted yet? Maybe the board comes back up? Kernel log after the reboot may tell you what is going on with that board. Also look at the red led in the board, when mine broke that led never turned on again.

The led still red, this is what my kernel log last show, anything helped??
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: FAILED!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!

get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=26
Chain[5] Chip[62] local Temp=53
Chain[5] Chip[62] middle Temp=42
Special fix Chain[5] Chip[62] middle Temp = 68
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=24
Chain[6] Chip[62] local Temp=50
Chain[6] Chip[62] middle Temp=39
Special fix Chain[6] Chip[62] middle Temp = 65
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=25
read failed, old value: Chain[7] Chip[62] local Temp=54
read failed on Chain[7] Chip[62] middle Temp old value:69
Special fix Chain[7] Chip[62] middle Temp = 69
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0

You have been fucked.

What country do you live in?

If the USA contac bitmainwarranty.

Sending it to China is worse.

Sending to bitmainwarranty is not free but will cost less and get done faster.

[mcptrman]

Hi All,

I was looking to buy the Bitmain Antminer S9 13.5 TH/s from an online company in the UK. They claim the unit is directly from Bitmain. The only difference on the specs on their site was the chips.

It is the same 13.5 TH/s units ?

Description from Bitmain Site:
AntMiner S9 Specifications:
1. Hash Rate: 13.5 TH/s ±5%
2. Power Consumption: 1323W ±10% (at the wall, with APW3++, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.098 W/GH ±7%(at the wall, with APW3++, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. ASIC Chip: 189 x BM1387
6. Dimensions: 350mm(L)*135mm(W)*158mm(H)
7. Cooling: 2x 12038 fans
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet (network cable not included)
10. Default Frequency: 650M

Description from Online site:
AntMiner S9 Specifications:
1. Hash Rate: 13.5 TH/s ±5%
2. Power Consumption: 1323W ±10% (at the wall, with APW3++, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.098 W/GH ±7%(at the wall, with APW3++, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. ASIC Chip: 90 x BM1387
6. Dimensions: 350mm(L)*135mm(W)*158mm(H)
7. Cooling: 2x 12038 fans
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet (network cable not included)
10. Default Frequency: 650M

The only real difference are the chips.
189 x BM-1387 and your unit shows 90 x BM1387

Anyone have any idea if this is the same unit ?

TIA,
Ed, aka-mcptrman

[HagssFIN]

There is no Antminer S9 version with 90 pieces BM1387 ASIC chips.

[mcptrman]

There is no Antminer S9 version with 90 pieces BM1387 ASIC chips.

Makes me wonder if it is a typo. I have seen it on another site

for example:

https://www.amazon.com/gp/product/B01MCZVPFE/?tag=cryptoguide-20

The description is at the bottom of the page.

Product description
Size:13.5 TH/s


*POWER SUPPLY IS NOT INCLUDED*
If you have 220v-264v power, then Bitmain recommends using the APW3++ power supply.
If you have 110v-120v power (standard power outlets in the US), then the following power supplies have been confirmed to work well:
-Bitmain's APW5 -EVGA's SuperNova 1600G2

AntMiner S9 Specifications:
1. Hash Rate: 13.5 TH/s ±5%
2. Power Consumption: 1323W ±10% (at the wall, with APW3++, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.098 W/GH ±7%(at the wall, with APW3++, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. ASIC Chip: 90 x BM1387
6. Dimensions: 350mm(L)*135mm(W)*158mm(H)
7. Cooling: 2x 12038 fans
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet (network cable not included)
10. Default Frequency: 650M

[HagssFIN]

It is definitely a typo.

[CryptoCrane]

There is no Antminer S9 version with 90 pieces BM1387 ASIC chips.

Makes me wonder if it is a typo. I have seen it on another site

for example:

https://www.amazon.com/gp/product/B01MCZVPFE/?tag=cryptoguide-20

The description is at the bottom of the page.

Product description
Size:13.5 TH/s


*POWER SUPPLY IS NOT INCLUDED*
If you have 220v-264v power, then Bitmain recommends using the APW3++ power supply.
If you have 110v-120v power (standard power outlets in the US), then the following power supplies have been confirmed to work well:
-Bitmain's APW5 -EVGA's SuperNova 1600G2

AntMiner S9 Specifications:
1. Hash Rate: 13.5 TH/s ±5%
2. Power Consumption: 1323W ±10% (at the wall, with APW3++, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.098 W/GH ±7%(at the wall, with APW3++, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. ASIC Chip: 90 x BM1387
6. Dimensions: 350mm(L)*135mm(W)*158mm(H)
7. Cooling: 2x 12038 fans
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet (network cable not included)
10. Default Frequency: 650M

Typo confirmed. It should be updated soon.

[CassiusV]

Has anyone tried to buy s9 asics from Alibaba? Are the sellers there trustworthy?

[Yaboy]

Has anyone tried to buy s9 asics from Alibaba? Are the sellers there trustworthy?

I don't have experience in this field specifically, but I have had dealings with Alibaba manufacturers before. Short answer, no.

[philipma1957]

Has anyone tried to buy s9 asics from Alibaba? Are the sellers there trustworthy?

yes there are good sellers.

but insist on paying with paypal.

I purchase and use paypal.

costs me 5% extra

but I get paypal protection


Never never never never buy from them if they do not take paypal.

[floppydisk]

can somebody tell me what wrong with my S9 miner?? Just run for one month. Can I fix it at home??? please help me

Looks like a board gave up. Try power cycle it, see if it comes back.

do you mean restart the miner???

Yes, unplug it, wait a couple of mins, plug it back again. Maybe save the kernel log if you haven't rebooted yet? Maybe the board comes back up? Kernel log after the reboot may tell you what is going on with that board. Also look at the red led in the board, when mine broke that led never turned on again.

The led still red, this is what my kernel log last show, anything helped??
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: FAILED!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!

get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=26
Chain[5] Chip[62] local Temp=53
Chain[5] Chip[62] middle Temp=42
Special fix Chain[5] Chip[62] middle Temp = 68
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=24
Chain[6] Chip[62] local Temp=50
Chain[6] Chip[62] middle Temp=39
Special fix Chain[6] Chip[62] middle Temp = 65
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=25
read failed, old value: Chain[7] Chip[62] local Temp=54
read failed on Chain[7] Chip[62] middle Temp old value:69
Special fix Chain[7] Chip[62] middle Temp = 69
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0

Hi, try these steps.
1.Disconnect all power supply lines.
2.Disconnect all communication cable. Carefull each have latch, press firm and pull. Inspect it/straighten cable.
3.Swap communication cable position between boards, install it back. Most likely card on left (from exhaust fan position) is having this issue.
4.Again re-attach power supply. Fire up.

[CassiusV]

Has anyone tried to buy s9 asics from Alibaba? Are the sellers there trustworthy?

yes there are good sellers.

but insist on paying with paypal.

I purchase and use paypal.

costs me 5% extra

but I get paypal protection


Never never never never buy from them if they do not take paypal.

Can you recommend some good sellers there? Im afraid i might receive fake or bad replicas...

[AlexxB]

Well I am in the same situation as you.
I never had an Antminer but I want to buy one.
I am in EU, and can pay only with visa card, or try to buy bitcoins with card to pay.
So I was looking on alibaba site for at least one month, but like you I don't know who to trust.

There are sellers with videos, and have their company name written on a paper.
I will try to post links here, hope I don't break any kind of rule.
This should provide proof that they are legit, but again, maybe there is at least one person in this world who bought one from alibaba and happens to have an account here and can help us out!
All of them have Transaction numbers (6 months) and 1/4/6 years registered on alibaba.

1) https://www.alibaba.com/product-detail/Bitmain-Antminer-S9-14TH-s-Bitcoin_60696358306.html?spm=a2700.7724838.2017115.1.8415ad9CDeRNw
2) https://www.alibaba.com/product-detail/hot-sale-fast-delivery-antminer-bitcoin_60707529187.html?spm=a2700.7724838.2017115.24.8415ad9CDeRNw
3) https://www.alibaba.com/product-detail/Antminer-S9-13-5TH-s-098W_60720051284.html?spm=a2700.7724838.2017115.34.8415ad9CDeRNw
4) https://www.alibaba.com/product-detail/Quicky-delivery-for-bitmain-antminer-S9_60701909360.html?spm=a2700.7724838.2017115.303.8415ad9CDeRNw

One information I can provide is that they asked me what TH do I want? 13.5 or 14? and when do I want it because the price differs. Like if I want it in 1 week is 5000 USD, 1 month 4000-3000 USD and so one.

It would be extremely helpful if someone who bought from them can come with a feedback to help out people who have only credit card.

Cheers!

[jchi2210]

I got in contact with them about my Jan 21-30 order being shipped but none of my Dec 10- 20 or Dec 20-30 orders being shipped and they told me that none of those will ship until after January 2nd. Doesn't make much sense to me but oh well!

[Sandal_Hat]

can somebody tell me what wrong with my S9 miner?? Just run for one month. Can I fix it at home??? please help me

Looks like a board gave up. Try power cycle it, see if it comes back.

do you mean restart the miner???

Yes, unplug it, wait a couple of mins, plug it back again. Maybe save the kernel log if you haven't rebooted yet? Maybe the board comes back up? Kernel log after the reboot may tell you what is going on with that board. Also look at the red led in the board, when mine broke that led never turned on again.

The led still red, this is what my kernel log last show, anything helped??
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: FAILED!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!

get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=26
Chain[5] Chip[62] local Temp=53
Chain[5] Chip[62] middle Temp=42
Special fix Chain[5] Chip[62] middle Temp = 68
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=24
Chain[6] Chip[62] local Temp=50
Chain[6] Chip[62] middle Temp=39
Special fix Chain[6] Chip[62] middle Temp = 65
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=25
read failed, old value: Chain[7] Chip[62] local Temp=54
read failed on Chain[7] Chip[62] middle Temp old value:69
Special fix Chain[7] Chip[62] middle Temp = 69
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0

Replacing ethernet cable to a higher quality one might work. Yes, i know it sounds silly buy it worked for me and a few of us. Check out my previous post on it. Recently worked for one more fellow

[mrbugera2]

is there any soft to reboot my device automatically when hashes drop to 0?
i really cant restart it manual very often, i have same problem with my d3 and with my s9

[CassiusV]

Well I am in the same situation as you.
I never had an Antminer but I want to buy one.
I am in EU, and can pay only with visa card, or try to buy bitcoins with card to pay.
So I was looking on alibaba site for at least one month, but like you I don't know who to trust.

There are sellers with videos, and have their company name written on a paper.
I will try to post links here, hope I don't break any kind of rule.
This should provide proof that they are legit, but again, maybe there is at least one person in this world who bought one from alibaba and happens to have an account here and can help us out!
All of them have Transaction numbers (6 months) and 1/4/6 years registered on alibaba.

1) https://www.alibaba.com/product-detail/Bitmain-Antminer-S9-14TH-s-Bitcoin_60696358306.html?spm=a2700.7724838.2017115.1.8415ad9CDeRNw
2) https://www.alibaba.com/product-detail/hot-sale-fast-delivery-antminer-bitcoin_60707529187.html?spm=a2700.7724838.2017115.24.8415ad9CDeRNw
3) https://www.alibaba.com/product-detail/Antminer-S9-13-5TH-s-098W_60720051284.html?spm=a2700.7724838.2017115.34.8415ad9CDeRNw
4) https://www.alibaba.com/product-detail/Quicky-delivery-for-bitmain-antminer-S9_60701909360.html?spm=a2700.7724838.2017115.303.8415ad9CDeRNw

One information I can provide is that they asked me what TH do I want? 13.5 or 14? and when do I want it because the price differs. Like if I want it in 1 week is 5000 USD, 1 month 4000-3000 USD and so one.

It would be extremely helpful if someone who bought from them can come with a feedback to help out people who have only credit card.

Cheers!

These are probably clones/replicas of the original bitmain product. Im curious if anyone bought something like that and if the asics are reliable like the original ones.

[boyno]

Well I am in the same situation as you.
I never had an Antminer but I want to buy one.
I am in EU, and can pay only with visa card, or try to buy bitcoins with card to pay.
So I was looking on alibaba site for at least one month, but like you I don't know who to trust.

There are sellers with videos, and have their company name written on a paper.
I will try to post links here, hope I don't break any kind of rule.
This should provide proof that they are legit, but again, maybe there is at least one person in this world who bought one from alibaba and happens to have an account here and can help us out!
All of them have Transaction numbers (6 months) and 1/4/6 years registered on alibaba.

1) https://www.alibaba.com/product-detail/Bitmain-Antminer-S9-14TH-s-Bitcoin_60696358306.html?spm=a2700.7724838.2017115.1.8415ad9CDeRNw
2) https://www.alibaba.com/product-detail/hot-sale-fast-delivery-antminer-bitcoin_60707529187.html?spm=a2700.7724838.2017115.24.8415ad9CDeRNw
3) https://www.alibaba.com/product-detail/Antminer-S9-13-5TH-s-098W_60720051284.html?spm=a2700.7724838.2017115.34.8415ad9CDeRNw
4) https://www.alibaba.com/product-detail/Quicky-delivery-for-bitmain-antminer-S9_60701909360.html?spm=a2700.7724838.2017115.303.8415ad9CDeRNw

One information I can provide is that they asked me what TH do I want? 13.5 or 14? and when do I want it because the price differs. Like if I want it in 1 week is 5000 USD, 1 month 4000-3000 USD and so one.

It would be extremely helpful if someone who bought from them can come with a feedback to help out people who have only credit card.

Cheers!

These are probably clones/replicas of the original bitmain product. Im curious if anyone bought something like that and if the asics are reliable like the original ones.

Also wondering if anyone has made any deals on Alibaba. I've been all over Alibaba for a couple months trying to find legit sellers. I've contacted probably every seller listing miners. Every single one of them wants to go wechat or whatsapp for sale and accept btc only. I cant get comfortable with that.

[madmartyk]

Well I am in the same situation as you.
I never had an Antminer but I want to buy one.
I am in EU, and can pay only with visa card, or try to buy bitcoins with card to pay.
So I was looking on alibaba site for at least one month, but like you I don't know who to trust.

There are sellers with videos, and have their company name written on a paper.
I will try to post links here, hope I don't break any kind of rule.
This should provide proof that they are legit, but again, maybe there is at least one person in this world who bought one from alibaba and happens to have an account here and can help us out!
All of them have Transaction numbers (6 months) and 1/4/6 years registered on alibaba.

1) https://www.alibaba.com/product-detail/Bitmain-Antminer-S9-14TH-s-Bitcoin_60696358306.html?spm=a2700.7724838.2017115.1.8415ad9CDeRNw
2) https://www.alibaba.com/product-detail/hot-sale-fast-delivery-antminer-bitcoin_60707529187.html?spm=a2700.7724838.2017115.24.8415ad9CDeRNw
3) https://www.alibaba.com/product-detail/Antminer-S9-13-5TH-s-098W_60720051284.html?spm=a2700.7724838.2017115.34.8415ad9CDeRNw
4) https://www.alibaba.com/product-detail/Quicky-delivery-for-bitmain-antminer-S9_60701909360.html?spm=a2700.7724838.2017115.303.8415ad9CDeRNw

One information I can provide is that they asked me what TH do I want? 13.5 or 14? and when do I want it because the price differs. Like if I want it in 1 week is 5000 USD, 1 month 4000-3000 USD and so one.

It would be extremely helpful if someone who bought from them can come with a feedback to help out people who have only credit card.

Cheers!

These are probably clones/replicas of the original bitmain product. Im curious if anyone bought something like that and if the asics are reliable like the original ones.

Also wondering if anyone has made any deals on Alibaba. I've been all over Alibaba for a couple months trying to find legit sellers. I've contacted probably every seller listing miners. Every single one of them wants to go wechat or whatsapp for sale and accept btc only. I cant get comfortable with that.

I have tried working deals on Alibaba, the prices that get quoted are more then I can buy on E-Bay for.  Right now they are quoting $3850 for an L3+, plus $200 for shipping.

[AriesIV10]

I have tried Alibaba in the past order for miners for about $10K and had good success.  Make sure you have a good rating on the company that you are buying from.

[Didley1JT]

Well I am in the same situation as you.
I never had an Antminer but I want to buy one.
I am in EU, and can pay only with visa card, or try to buy bitcoins with card to pay.
So I was looking on alibaba site for at least one month, but like you I don't know who to trust.

There are sellers with videos, and have their company name written on a paper.
I will try to post links here, hope I don't break any kind of rule.
This should provide proof that they are legit, but again, maybe there is at least one person in this world who bought one from alibaba and happens to have an account here and can help us out!
All of them have Transaction numbers (6 months) and 1/4/6 years registered on alibaba.

1) https://www.alibaba.com/product-detail/Bitmain-Antminer-S9-14TH-s-Bitcoin_60696358306.html?spm=a2700.7724838.2017115.1.8415ad9CDeRNw
2) https://www.alibaba.com/product-detail/hot-sale-fast-delivery-antminer-bitcoin_60707529187.html?spm=a2700.7724838.2017115.24.8415ad9CDeRNw
3) https://www.alibaba.com/product-detail/Antminer-S9-13-5TH-s-098W_60720051284.html?spm=a2700.7724838.2017115.34.8415ad9CDeRNw
4) https://www.alibaba.com/product-detail/Quicky-delivery-for-bitmain-antminer-S9_60701909360.html?spm=a2700.7724838.2017115.303.8415ad9CDeRNw

One information I can provide is that they asked me what TH do I want? 13.5 or 14? and when do I want it because the price differs. Like if I want it in 1 week is 5000 USD, 1 month 4000-3000 USD and so one.

It would be extremely helpful if someone who bought from them can come with a feedback to help out people who have only credit card.

Cheers!

These are probably clones/replicas of the original bitmain product. Im curious if anyone bought something like that and if the asics are reliable like the original ones.

Also wondering if anyone has made any deals on Alibaba. I've been all over Alibaba for a couple months trying to find legit sellers. I've contacted probably every seller listing miners. Every single one of them wants to go wechat or whatsapp for sale and accept btc only. I cant get comfortable with that.

I have tried working deals on Alibaba, the prices that get quoted are more then I can buy on E-Bay for.  Right now they are quoting $3850 for an L3+, plus $200 for shipping.

They will lower the price if you reply and show them the current eBay listings.