michelem
Legendary
 Offline
Activity: 1015
Merit: 1000
|
 |
November 07, 2016, 05:22:54 PM |
|
Has anyone asked in the Minera thread if they will be adding support for the Dominator A4?
Thanks for the heads up on Minera. I just popped into that thread and asked the question.  Minera is a great program. I will pop over and ask also.. The more they see ask the better. I asked them if they would add the A2 a long while ago but no response.. UPDATE I just sent them a message.. I invited them to join this thread hopefully we will hear from them. I think this is a very good idea. Please everyone go and put in a request we will see if they can help. They are here https://getminera.comHello I'm the Minera's author. Can I know what's the problem with A4? Then, what kind of miner software does it use? If it can work with Cgminer or similar there isn't much problem, but if it has its own ultra-forked-wtf-you-did-miner I'm sorry I can't help much. Hello and thanks for stopping by. I am sure others will chime in here with detailed problems. But what is happening is the miner is unstable it will start off mining at spec then it will slowly loose hashrate and in most cases crash and need a re-boot. It does not handle coin switching pools at all. That will cause a crash for sure. On litecoinpool.org it will mine but not near the hashrate it is advertised at. The company that built it has sent a update firmware but it is nothing but a monitering process that when it sees hashrate drop does a auto re-boot. The miner uses cgminer 3.9.0 It is advertised to mine at 280Mhs and about the best we can get is 245-250mhs. And it will not mine on prohash.com where they coinswitch that seems to crash the miner all together. I am sure others will chime in that have done much more testing then I have but this is the jist of the problem. Thanks for stopping by we all hope someone can help here get some some good stable software going. Well I'm not a miner software developer, so any kind of problem with it I can't do anything. To add it to Minera instead you need only (if it's possible with the Cgminer version it has) to add the --api-allow option to be reachable by Minera controller and add it as "network miner", but you will not be able to manage it, only monitor. |
|
|
|
|
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
Nowayz
Newbie
Offline
Activity: 17
Merit: 0
|
|
November 07, 2016, 05:27:06 PM |
|
These are some errors when the board dropping occurs. Only board cs3 is found by cgminer and other board will eventually work or dropped after a long run time. It seems that the spi bus fails to initiate the boards but im not sure. Temperature is not the problem as the board run around 44C. [2016-11-07 23:18:48] Started cgminer 3.9.0
[2016-11-07 23:18:48] Run Reset=1
[2016-11-07 23:18:48] ST MCU hardware reset start
[2016-11-07 23:18:52] SPI Speed 4000 kHz
[2016-11-07 23:18:52] ST MCU - Enable (Pre-header)
[2016-11-07 23:18:52] Run temperature 35C
[2016-11-07 23:18:52] A1 = 1200,7
[2016-11-07 23:18:52] A1 PLL Clock = 1200MHz
[2016-11-07 23:18:52] A1 = 1200,7
[2016-11-07 23:18:52] A1 PLL Clock = 1200MHz
[2016-11-07 23:18:52] A1 = 1200,7
[2016-11-07 23:18:52] A1 PLL Clock = 1200MHz
[2016-11-07 23:18:52] A1 = 1200,7
[2016-11-07 23:18:52] A1 PLL Clock = 1200MHz
[2016-11-07 23:18:52] A1 = 1200,7
[2016-11-07 23:18:52] A1 PLL Clock = 1200MHz
[2016-11-07 23:18:52] A1 = 1200,7
[2016-11-07 23:18:52] A1 PLL Clock = 1200MHz
[2016-11-07 23:18:52] AUTO GPIO CS
&[2016-11-07 23:18:52] Failure(cs0)(2): missing ACK for cmd 0x02
[2016-11-07 23:18:52] ACK(cs0) timeout:cmd_POWER_ON_BCAST-0.0620s
&[2016-11-07 23:18:55] Failure(cs0)(2): missing ACK for cmd 0x04
[2016-11-07 23:18:55] ACK(cs0) timeout:cmd_RESET_BCAST - 0.62 ms
&[2016-11-07 23:18:55] Failure(cs1)(2): missing ACK for cmd 0x02
[2016-11-07 23:18:55] ACK(cs1) timeout:cmd_POWER_ON_BCAST-0.0574s
&[2016-11-07 23:18:58] Failure(cs1)(2): missing ACK for cmd 0x04
[2016-11-07 23:18:58] ACK(cs1) timeout:cmd_RESET_BCAST - 0.62 ms
&[2016-11-07 23:18:58] Failure(cs2)(2): missing ACK for cmd 0x02
[2016-11-07 23:18:58] ACK(cs2) timeout:cmd_POWER_ON_BCAST-0.0548s
&[2016-11-07 23:19:01] Failure(cs2)(2): missing ACK for cmd 0x04
[2016-11-07 23:19:01] ACK(cs2) timeout:cmd_RESET_BCAST - 0.71 ms
[2016-11-07 23:19:01] spidev0.0(cs3): Found 20 A2 chips
[2016-11-07 23:19:01] Found chip 1 with 100 active cores
[2016-11-07 23:19:01] Found chip 2 with 100 active cores
[2016-11-07 23:19:01] Found chip 3 with 100 active cores
[2016-11-07 23:19:01] Found chip 4 with 100 active cores
[2016-11-07 23:19:01] Found chip 5 with 100 active cores
[2016-11-07 23:19:01] Found chip 6 with 100 active cores
[2016-11-07 23:19:01] Found chip 7 with 100 active cores
[2016-11-07 23:19:01] Found chip 8 with 100 active cores
[2016-11-07 23:19:01] Found chip 9 with 100 active cores
[2016-11-07 23:19:01] Found chip 10 with 100 active cores
[2016-11-07 23:19:01] Found chip 11 with 100 active cores
[2016-11-07 23:19:01] Found chip 12 with 100 active cores
[2016-11-07 23:19:01] Found chip 13 with 100 active cores
[2016-11-07 23:19:01] Found chip 14 with 100 active cores
[2016-11-07 23:19:01] Found chip 15 with 100 active cores
[2016-11-07 23:19:01] Found chip 16 with 100 active cores
[2016-11-07 23:19:01] Found chip 17 with 100 active cores
[2016-11-07 23:19:01] Found chip 18 with 100 active cores
[2016-11-07 23:19:01] Found chip 19 with 100 active cores
[2016-11-07 23:19:01] Found chip 20 with 100 active cores
[2016-11-07 23:19:01] Found 20 chips with total 2000 active cores
[2016-11-07 23:19:01] PI(cs5) match the cg and dr
[2016-11-07 23:19:01] SPI(cs3) A1_SetA1Vol
& [2016-11-07 23:19:01] Failure(cs4)(2): missing ACK for cmd 0x02
[2016-11-07 23:19:01] ACK(cs4) timeout:cmd_POWER_ON_BCAST-0.0739s
& [2016-11-07 23:19:04] Failure(cs4)(2): missing ACK for cmd 0x04
[2016-11-07 23:19:04] ACK(cs4) timeout:cmd_RESET_BCAST - 0.68 ms
& [2016-11-07 23:19:04] Failure(cs5)(2): missing ACK for cmd 0x02
[2016-11-07 23:19:04] ACK(cs5) timeout:cmd_POWER_ON_BCAST-0.0615s
& [2016-11-07 23:19:07] Failure(cs5)(2): missing ACK for cmd 0x04
[2016-11-07 23:19:07] ACK(cs5) timeout:cmd_RESET_BCAST - 0.73 ms
[2016-11-07 23:19:07] A2 boards=1, active cores=2000, speed=47.76M
[2016-11-07 23:19:07] Tan total_devices : 1
[2016-11-07 23:19:07] Tan cs_cnt_error
[2016-11-07 23:19:07] Probing for an alive pool
[2016-11-07 23:19:07] Switching to pool 1 stratum+tcp://scrypt.eu.nicehash.com:3333 - first alive pool
[2016-11-07 23:19:07] Pool 0 stratum+tcp://scrypt.eu.nicehash.com:3333 alive, testing stability
[2016-11-07 23:19:07] Switching to pool 0 stratum+tcp://scrypt.eu.nicehash.com:3333
[2016-11-07 23:19:07] Pool 1 difficulty changed to 4096
[2016-11-07 23:19:07] Network diff set to 1.45K
[2016-11-07 23:19:07] Pool 0 difficulty changed to 4096
[2016-11-07 23:19:07] Stratum from pool 0 requested work restart
[2016-11-07 23:19:08] Failure(cs3)(40): missing ACK for cmd 0x02
[2016-11-07 23:19:08] ACK(cs3) timeout:cmd_POWER_ON_BCAST-0.2969s
[2016-11-07 23:19:08] Pool 2 difficulty changed to 4096
[2016-11-07 23:19:10] Accepted 02da27f6 Diff 23K/4096 BA2 0 pool 0
[2016-11-07 23:19:10] Accepted 02da27f6 Diff 23K/4096 BA2 0 |
|
|
|
|
|
Eyedol-X
|
|
November 07, 2016, 06:58:27 PM |
|
I really hope this is just some sort of software issue and not a design flaw with the hardware.
|
|
|
|
|
|
firehawk71
|
|
November 07, 2016, 07:02:29 PM
Last edit: November 07, 2016, 07:24:00 PM by firehawk71 |
|
I really hope this is just some sort of software issue and not a design flaw with the hardware.
I read that the max operating temp is 40c. I have not seen any run under 40c yet I am having better luck on litecoinpool using lower voltage settings like 804-805. If I go higher then 810 I get massive stale share which drops hashrate |
|
|
|
|
Nowayz
Newbie
Offline
Activity: 17
Merit: 0
|
|
November 07, 2016, 07:33:46 PM |
|
Found some boards coming back in the logs. [2016-11-07 17:58:28] Reinit board (cs2)
[2016-11-07 17:58:28] spidev0.0(cs2): Found 20 A2 chips
[2016-11-07 17:58:28] Found chip 1 with 100 active cores
[2016-11-07 17:58:28] Found chip 2 with 100 active cores
[2016-11-07 17:58:28] Found chip 3 with 100 active cores
[2016-11-07 17:58:28] Found chip 4 with 100 active cores
[2016-11-07 17:58:28] Found chip 5 with 100 active cores
[2016-11-07 17:58:28] Found chip 6 with 100 active cores
[2016-11-07 17:58:28] Found chip 7 with 100 active cores
[2016-11-07 17:58:28] Found chip 8 with 100 active cores
[2016-11-07 17:58:28] Found chip 9 with 100 active cores
[2016-11-07 17:58:28] Found chip 10 with 100 active cores
[2016-11-07 17:58:28] Found chip 11 with 100 active cores
[2016-11-07 17:58:28] Found chip 12 with 100 active cores
[2016-11-07 17:58:28] Found chip 13 with 100 active cores
[2016-11-07 17:58:28] Found chip 14 with 100 active cores
[2016-11-07 17:58:28] Found chip 15 with 100 active cores
[2016-11-07 17:58:28] Found chip 16 with 100 active cores
[2016-11-07 17:58:28] Found chip 17 with 100 active cores
[2016-11-07 17:58:28] Found chip 18 with 100 active cores
[2016-11-07 17:58:28] Found chip 19 with 100 active cores
[2016-11-07 17:58:28] Found chip 20 with 100 active cores
[2016-11-07 17:58:28] Found 20 chips with total 2000 active cores
[2016-11-07 17:58:29] Accepted 035b2753 Diff 19.5K/8192 BA2 2 pool 0
[2016-11-07 17:58:29] Accepted 035b2753 Diff 19.5K/8192 BA2 2
[2016-11-07 17:58:29] Accepted 043a50a3 Diff 15.5K/8192 BA2 2 pool 0
[2016-11-07 17:58:29] Accepted 043a50a3 Diff 15.5K/8192 BA2 2
(5s):164.8M (avg):198.8Mh/s | A:1044480 R:0 WU:186784.7/m
[2016-11-07 17:58:30] Accepted 02c6a302 Diff 23.6K/8192 BA2 1 pool 0
[2016-11-07 17:58:30] Accepted 02c6a302 Diff 23.6K/8192 BA2 1
[2016-11-07 17:58:31] Accepted 0634dac1 Diff 10.6K/8192 BA2 1 pool 0
[2016-11-07 17:58:31] Accepted 0634dac1 Diff 10.6K/8192 BA2 1
[2016-11-07 17:58:32] Accepted 01b361ea Diff 38.5K/8192 BA2 0 pool 0
[2016-11-07 17:58:32] Accepted 01b361ea Diff 38.5K/8192 BA2 0
[2016-11-07 17:58:33] chip(cs2) 2: invalid nonce 0xde89c800
[2016-11-07 17:58:33] Accepted 01022d49 Diff 65K/8192 BA2 0 pool 0
[2016-11-07 17:58:33] Accepted 01022d49 Diff 65K/8192 BA2 0
[2016-11-07 17:58:33] Accepted 0732c416 Diff 9.1K/8192 BA2 0 pool 0
[2016-11-07 17:58:33] Accepted 0732c416 Diff 9.1K/8192 BA2 0
[2016-11-07 17:58:33] Network diff set to 30
[2016-11-07 17:58:33] Stratum from pool 0 detected new block
[2016-11-07 17:58:33] Reinit board (cs4)
(5s):173.8M (avg):198.6Mh/s | A:1085440 R:0 WU:191203.8/m
[2016-11-07 17:58:36] spidev0.0(cs4): Found 20 A2 chips
[2016-11-07 17:58:36] Found chip 1 with 98 active cores
[2016-11-07 17:58:36] Found chip 2 with 99 active cores
[2016-11-07 17:58:36] Found chip 3 with 99 active cores
[2016-11-07 17:58:36] Found chip 4 with 99 active cores
[2016-11-07 17:58:36] Found chip 5 with 99 active cores
[2016-11-07 17:58:36] Found chip 6 with 94 active cores
[2016-11-07 17:58:36] Found chip 7 with 99 active cores
[2016-11-07 17:58:36] Found chip 8 with 97 active cores
[2016-11-07 17:58:36] Found chip 9 with 98 active cores
[2016-11-07 17:58:36] Found chip 10 with 99 active cores
[2016-11-07 17:58:36] Found chip 11 with 99 active cores
[2016-11-07 17:58:36] Found chip 12 with 98 active cores
[2016-11-07 17:58:36] Found chip 13 with 98 active cores
[2016-11-07 17:58:36] Found chip 14 with 99 active cores
[2016-11-07 17:58:36] Found chip 15 with 99 active cores
[2016-11-07 17:58:36] Found chip 16 with 95 active cores
[2016-11-07 17:58:36] Found chip 17 with 99 active cores
[2016-11-07 17:58:36] Found chip 18 with 99 active cores
[2016-11-07 17:58:36] Found chip 19 with 99 active cores
[2016-11-07 17:58:36] Found chip 20 with 96 active cores
[2016-11-07 17:58:36] Found 20 chips with total 1962 active cores
[2016-11-07 17:58:38] chip(cs2) 4: invalid nonce 0xa3b1e700
[2016-11-07 17:58:38] Accepted 031d35c4 Diff 21K/8192 BA2 0 pool 0
[2016-11-07 17:58:38] Accepted 031d35c4 Diff 21K/8192 BA2 0
[2016-11-07 17:58:39] Accepted a932e209 Diff 99.2K/8192 BA2 1 pool 0
[2016-11-07 17:58:39] Accepted a932e209 Diff 99.2K/8192 BA2 1
(5s):166.0M (avg):197.9Mh/s | A:1101824 R:0 WU:191204.7/m
[2016-11-07 17:58:43] Network diff set to 30
[2016-11-07 17:58:43] Stratum from pool 0 detected new block
[2016-11-07 17:58:43] chip(cs2) 6: invalid nonce 0x58101100
[2016-11-07 17:58:43] Accepted b975d9b3 Diff 90.5K/8192 BA2 1 pool 0
[2016-11-07 17:58:43] Accepted b975d9b3 Diff 90.5K/8192 BA2 1
(5s):179.0M (avg):198.0Mh/s | A:1110016 R:0 WU:189877.7/m
[2016-11-07 17:58:45] Accepted 04e5d190 Diff 13.4K/8192 BA2 2 pool 0
[2016-11-07 17:58:45] Accepted 04e5d190 Diff 13.4K/8192 BA2 2
[2016-11-07 17:58:47] Accepted 0415b023 Diff 16K/8192 BA2 2 pool 0
[2016-11-07 17:58:47] Accepted 0415b023 Diff 16K/8192 BA2 2
[2016-11-07 17:58:48] Network diff set to 30
[2016-11-07 17:58:48] Stratum from pool 0 detected new block
[2016-11-07 17:58:49] Accepted 05f22e16 Diff 11K/8192 BA2 1 pool 0
[2016-11-07 17:58:49] Accepted 05f22e16 Diff 11K/8192 BA2 1
[2016-11-07 17:58:49] Accepted 0184cebe Diff 43.1K/8192 BA2 0 pool 0
[2016-11-07 17:58:49] Accepted 0184cebe Diff 43.1K/8192 BA2 0
(5s):184.2M (avg):197.9Mh/s | A:1142784 R:0 WU:192635.9/m
[2016-11-07 17:58:52] Accepted 069f0389 Diff 9.9K/8192 BA2 1 pool 0
[2016-11-07 17:58:52] Accepted 069f0389 Diff 9.9K/8192 BA2 1
[2016-11-07 17:58:52] Accepted 068856c6 Diff 10K/8192 BA2 1 pool 0
[2016-11-07 17:58:52] Accepted 068856c6 Diff 10K/8192 BA2 1
[2016-11-07 17:58:53] Network diff set to 30
[2016-11-07 17:58:53] Stratum from pool 0 detected new block
[2016-11-07 17:58:53] Reinit board (cs4)
[2016-11-07 17:58:53] spidev0.0(cs4): Found 20 A2 chips
[2016-11-07 17:58:53] Found chip 1 with 98 active cores
[2016-11-07 17:58:53] Found chip 2 with 99 active cores
[2016-11-07 17:58:53] Found chip 3 with 99 active cores
[2016-11-07 17:58:53] Found chip 4 with 99 active cores
[2016-11-07 17:58:53] Found chip 5 with 99 active cores
[2016-11-07 17:58:53] Found chip 6 with 94 active cores
[2016-11-07 17:58:53] Found chip 7 with 99 active cores
[2016-11-07 17:58:53] Found chip 8 with 97 active cores
[2016-11-07 17:58:53] Found chip 9 with 98 active cores
[2016-11-07 17:58:53] Found chip 10 with 99 active cores
[2016-11-07 17:58:53] Found chip 11 with 99 active cores
[2016-11-07 17:58:53] Found chip 12 with 98 active cores
[2016-11-07 17:58:53] Found chip 13 with 98 active cores
[2016-11-07 17:58:53] Found chip 14 with 99 active cores
[2016-11-07 17:58:53] Found chip 15 with 99 active cores
[2016-11-07 17:58:53] Found chip 16 with 95 active cores
[2016-11-07 17:58:53] Found chip 17 with 99 active cores
[2016-11-07 17:58:53] Found chip 18 with 99 active cores
[2016-11-07 17:58:53] Found chip 19 with 99 active cores
[2016-11-07 17:58:53] Found chip 20 with 96 active cores
[2016-11-07 17:58:53] Found 20 chips with total 1962 active cores
[2016-11-07 17:58:54] Accepted 84bc37cd Diff 126K/8192 BA2 1 pool 0
[2016-11-07 17:58:54] Accepted 84bc37cd Diff 126K/8192 BA2 1
(5s):182.2M (avg):197.6Mh/s | A:1167360 R:0 WU:194008.0/m
[2016-11-07 17:58:56] Accepted 0460fb42 Diff 15K/8192 BA2 0 pool 0
[2016-11-07 17:58:56] Accepted 0460fb42 Diff 15K/8192 BA2 0
[2016-11-07 17:58:56] Accepted 07cc8ef2 Diff 8.4K/8192 BA2 1 pool 0
[2016-11-07 17:58:56] Accepted 07cc8ef2 Diff 8.4K/8192 BA2 1
[2016-11-07 17:58:58] Accepted 04dcbee1 Diff 13.5K/8192 BA2 1 pool 0
[2016-11-07 17:58:58] Accepted 04dcbee1 Diff 13.5K/8192 BA2 1
[2016-11-07 17:58:58] Stratum from pool 0 detected new block
(5s):188.3M (avg):197.6Mh/s | A:1191936 R:0 WU:195378.5/m
[2016-11-07 17:59:01] Accepted 07cfab3d Diff 8.39K/8192 BA2 0 pool 0
[2016-11-07 17:59:01] Accepted 07cfab3d Diff 8.39K/8192 BA2 0
[2016-11-07 17:59:02] chip(cs2) 19: invalid nonce 0x0270aa00
[2016-11-07 17:59:02] Accepted 016f76fe Diff 45.7K/8192 BA2 1 pool 0
[2016-11-07 17:59:02] Accepted 016f76fe Diff 45.7K/8192 BA2 1
[2016-11-07 17:59:03] chip(cs3) 5: invalid nonce 0xc398ff00
(5s):193.6M (avg):197.7Mh/s | A:1208320 R:0 WU:195324.8/m
[2016-11-07 17:59:06] Accepted 0482a875 Diff 14.5K/8192 BA2 2 pool 0
[2016-11-07 17:59:06] Accepted 0482a875 Diff 14.5K/8192 BA2 2
[2016-11-07 17:59:08] Accepted 0247e1b6 Diff 28.7K/8192 BA2 2 pool 0
[2016-11-07 17:59:08] Accepted 0247e1b6 Diff 28.7K/8192 BA2 2
[2016-11-07 17:59:09] Accepted 02972cfb Diff 25.3K/8192 BA2 1 pool 0
[2016-11-07 17:59:09] Accepted 02972cfb Diff 25.3K/8192 BA2 1
(5s):198.4M (avg):197.8Mh/s | A:1232896 R:0 WU:196594.3/m
[2016-11-07 17:59:11] Accepted 0300ab90 Diff 21.8K/8192 BA2 1 pool 0
[2016-11-07 17:59:11] Accepted 0300ab90 Diff 21.8K/8192 BA2 1
[2016-11-07 17:59:11] Accepted 1b1bd072 Diff 619K/8192 BA2 2 pool 0
[2016-11-07 17:59:11] Accepted 1b1bd072 Diff 619K/8192 BA2 2
[2016-11-07 17:59:11] chip(cs4) 17: invalid nonce 0x3d868d02
[2016-11-07 17:59:11] Accepted 441acffe Diff 246K/8192 BA2 0 pool 0
[2016-11-07 17:59:11] Accepted 441acffe Diff 246K/8192 BA2 0
(5s):200.6M (avg):197.9Mh/s | A:1257472 R:0 WU:197881.9/m
[2016-11-07 17:59:15] Accepted 070840b1 Diff 9.32K/8192 BA2 1 pool 0
[2016-11-07 17:59:15] Accepted 070840b1 Diff 9.32K/8192 BA2 1
[2016-11-07 17:59:19] chip(cs3) 9: invalid nonce 0xb2045104
(5s):202.9M (avg):198.0Mh/s | A:1265664 R:0 WU:196552.0/m
[2016-11-07 17:59:20] Network diff set to 30
[2016-11-07 17:59:20] Stratum from pool 0 detected new block
[2016-11-07 17:59:21] Accepted 0160d952 Diff 47.5K/8192 BA2 1 pool 0
[2016-11-07 17:59:21] Accepted 0160d952 Diff 47.5K/8192 BA2 1
[2016-11-07 17:59:21] chip(cs2) 5: invalid nonce 0x6bbc2300
[2016-11-07 17:59:22] chip(cs2) 6: invalid nonce 0x34e93d00
[2016-11-07 17:59:23] Accepted 05ff3750 Diff 10.9K/8192 BA2 0 pool 0
[2016-11-07 17:59:23] Accepted 05ff3750 Diff 10.9K/8192 BA2 0
[2016-11-07 17:59:24] Accepted 02f03bd2 Diff 22.3K/8192 BA2 2 pool 0
[2016-11-07 17:59:24] Accepted 02f03bd2 Diff 22.3K/8192 BA2 2
[2016-11-07 17:59:25] chip(cs3) 13: invalid nonce 0x0bffc800
(5s):201.2M (avg):198.0Mh/s | A:1290240 R:0 WU:197764.5/m
[2016-11-07 17:59:26] Network diff set to 30
[2016-11-07 17:59:26] Stratum from pool 0 detected new block
[2016-11-07 17:59:28] chip(cs4) 19: invalid nonce 0x5be24900
[2016-11-07 17:59:28] Accepted 01b369e2 Diff 38.5K/8192 BA2 0 pool 0
[2016-11-07 17:59:28] Accepted 01b369e2 Diff 38.5K/8192 BA2 0
[2016-11-07 17:59:30] chip(cs2) 17: invalid nonce 0xfd889f00
[2016-11-07 17:59:30] Network diff set to 30
[2016-11-07 17:59:30] Stratum from pool 0 detected new block
[2016-11-07 17:59:30] Reinit board (cs3)
[2016-11-07 17:59:30] spidev0.0(cs3): Found 20 A2 chips
[2016-11-07 17:59:30] Found chip 1 with 100 active cores
[2016-11-07 17:59:30] Found chip 2 with 100 active cores
[2016-11-07 17:59:30] Found chip 3 with 100 active cores
[2016-11-07 17:59:30] Found chip 4 with 100 active cores
[2016-11-07 17:59:30] Found chip 5 with 100 active cores
[2016-11-07 17:59:30] Found chip 6 with 100 active cores
[2016-11-07 17:59:30] Found chip 7 with 100 active cores
[2016-11-07 17:59:30] Found chip 8 with 100 active cores
[2016-11-07 17:59:30] Found chip 9 with 100 active cores
[2016-11-07 17:59:30] Found chip 10 with 100 active cores
[2016-11-07 17:59:30] Found chip 11 with 100 active cores
[2016-11-07 17:59:30] Found chip 12 with 100 active cores
[2016-11-07 17:59:30] Found chip 13 with 100 active cores
[2016-11-07 17:59:30] Found chip 14 with 100 active cores
[2016-11-07 17:59:30] Found chip 15 with 100 active cores
[2016-11-07 17:59:30] Found chip 16 with 100 active cores
[2016-11-07 17:59:30] Found chip 17 with 100 active cores
[2016-11-07 17:59:30] Found chip 18 with 100 active cores
[2016-11-07 17:59:30] Found chip 19 with 100 active cores
[2016-11-07 17:59:30] Found chip 20 with 100 active cores
[2016-11-07 17:59:30] Found 20 chips with total 2000 active cores
(5s):197.3M (avg):197.9Mh/s | A:1298432 R:0 WU:196467.2/m
[2016-11-07 17:59:31] Network diff set to 30
[2016-11-07 17:59:31] Stratum from pool 0 detected new block
[2016-11-07 17:59:32] Accepted 01d711ec Diff 35.6K/8192 BA2 0 pool 0
[2016-11-07 17:59:32] Accepted 01d711ec Diff 35.6K/8192 BA2 0
[2016-11-07 17:59:33] Accepted 07e5aba0 Diff 8.3K/8192 BA2 1 pool 0
[2016-11-07 17:59:33] Accepted 07e5aba0 Diff 8.3K/8192 BA2 1
[2016-11-07 17:59:34] chip(cs2) 19: invalid nonce 0x1e7f8f00
(5s):190.4M (avg):197.7Mh/s | A:1314816 R:0 WU:196467.8/m
[2016-11-07 17:59:37] Accepted 0164c98e Diff 47K/8192 BA2 2 pool 0
[2016-11-07 17:59:37] Accepted 0164c98e Diff 47K/8192 BA2 2
[2016-11-07 17:59:38] Accepted 01f796f9 Diff 33.3K/8192 BA2 1 pool 0
[2016-11-07 17:59:38] Accepted 01f796f9 Diff 33.3K/8192 BA2 1
[2016-11-07 17:59:39] Accepted 070edd9f Diff 9.29K/8192 BA2 0 pool 0
[2016-11-07 17:59:39] Accepted 070edd9f Diff 9.29K/8192 BA2 0
[2016-11-07 17:59:39] chip(cs4) 19: invalid nonce 0x8cbd6701
[2016-11-07 17:59:40] Accepted 0205216c Diff 32.4K/8192 BA2 0 pool 0
[2016-11-07 17:59:40] Accepted 0205216c Diff 32.4K/8192 BA2 0
(5s):195.4M (avg):197.7Mh/s | A:1347584 R:0 WU:198838.6/m
[2016-11-07 17:59:43] Accepted 04c61240 Diff 13.7K/8192 BA2 1 pool 0
[2016-11-07 17:59:43] Accepted 04c61240 Diff 13.7K/8192 BA2 1
(5s):198.5M (avg):197.8Mh/s | A:1355776 R:0 WU:197557.3/m
[2016-11-07 17:59:46] chip(cs4) 19: invalid nonce 0x9cd5cd02
[2016-11-07 17:59:46] chip(cs2) 6: invalid nonce 0x5066fc02
[2016-11-07 17:59:48] Shutdown signal received. I also hope this is a software problem. Is it possible that communication between the boards and the raspberry is terrible(or wrong configuration) and causes the board to drop? |
|
|
|
|
wheelz1200
Legendary
Offline
Activity: 3612
Merit: 1406
|
|
November 07, 2016, 09:00:31 PM |
|
Ive been waiting awhile for these to come out, but it looks as though the first batch is having a lot of problems. Has anyone heard from inno about having someone here having a look at it to see if it can be maximized further (i.e. as gentarkin did for the titans)?
|
|
|
|
|
Longsnowsm (OP)
|
|
November 07, 2016, 09:25:26 PM |
|
Ive been waiting awhile for these to come out, but it looks as though the first batch is having a lot of problems. Has anyone heard from inno about having someone here having a look at it to see if it can be maximized further (i.e. as gentarkin did for the titans)?
Yes, Inno is aware and in this thread. They are currently working to open source the miner software. I think if we could get one of these in the hands of Gentarkin or some of the other code wizards they could pull it apart and sort it out. We just have to figure out how to make that happen. Hopefully we will get some more updates from Inno for the software while we are trying to get community support on board for this miner. |
|
|
|
|
lightfoot
Legendary
Offline
Activity: 3108
Merit: 2239
I fix broken miners. And make holes in teeth :-)
|
|
November 07, 2016, 10:23:00 PM |
|
Tell you what: If you post a whole iso dump of your sdcard I will take a look at it on my Rpi here and see if the logs make any sort of sense or if the programs can be kicked to do more loggging.
PM me a dropbox link or something with the file, I have a lot of Titans to work on but can put a look see in the work queue.
C
|
|
|
|
|
wheelz1200
Legendary
Offline
Activity: 3612
Merit: 1406
|
|
November 07, 2016, 10:39:56 PM |
|
Ive been waiting awhile for these to come out, but it looks as though the first batch is having a lot of problems. Has anyone heard from inno about having someone here having a look at it to see if it can be maximized further (i.e. as gentarkin did for the titans)?
Yes, Inno is aware and in this thread. They are currently working to open source the miner software. I think if we could get one of these in the hands of Gentarkin or some of the other code wizards they could pull it apart and sort it out. We just have to figure out how to make that happen. Hopefully we will get some more updates from Inno for the software while we are trying to get community support on board for this miner. Thanks appreciate the heads up. If/when this gets sorted has there been a talk of another group buy maybe during the next batch releases? |
|
|
|
|
firehawk71
|
|
November 08, 2016, 12:48:27 AM |
|
Tell you what: If you post a whole iso dump of your sdcard I will take a look at it on my Rpi here and see if the logs make any sort of sense or if the programs can be kicked to do more loggging.
PM me a dropbox link or something with the file, I have a lot of Titans to work on but can put a look see in the work queue.
C
I can upload a batch one img file if you would like to look at it.. I will need some time to get it uploaded.. But we should have these images available for anyone to look at or download if needed.. Thanks |
|
|
|
|
|
Eyedol-X
|
|
November 08, 2016, 01:09:06 AM |
|
Tell you what: If you post a whole iso dump of your sdcard I will take a look at it on my Rpi here and see if the logs make any sort of sense or if the programs can be kicked to do more loggging.
PM me a dropbox link or something with the file, I have a lot of Titans to work on but can put a look see in the work queue.
C
Sent a PM Thanks for your interest here. |
|
|
|
|
|
firehawk71
|
|
November 08, 2016, 02:52:41 AM |
|
Tell you what: If you post a whole iso dump of your sdcard I will take a look at it on my Rpi here and see if the logs make any sort of sense or if the programs can be kicked to do more loggging.
PM me a dropbox link or something with the file, I have a lot of Titans to work on but can put a look see in the work queue.
C
Sent a PM Thanks for your interest here. Ok so whats the deal.. You need a image uploaded or not? I am not uploading if someone else has already..Jezz |
|
|
|
|
|
Eyedol-X
|
|
November 08, 2016, 03:14:37 AM |
|
Tell you what: If you post a whole iso dump of your sdcard I will take a look at it on my Rpi here and see if the logs make any sort of sense or if the programs can be kicked to do more loggging.
PM me a dropbox link or something with the file, I have a lot of Titans to work on but can put a look see in the work queue.
C
Sent a PM Thanks for your interest here. Ok so whats the deal.. You need a image uploaded or not? I am not uploading if someone else has already..Jezz If you have an image of the miner running 1.0.2 for more than 24 hours with crashing issues, I say upload it and PM the link. The image I created has only got about 12-14 hours worth of log/mining history. |
|
|
|
|
tbly13
Jr. Member
Offline
Activity: 59
Merit: 10
|
|
November 08, 2016, 06:10:01 AM |
|
Is anyone else not able to remote into their A4? I have mine online and am able to see that it is using the default IP address with an IP scanner, but whenever I type it into a browser I am getting a 'Site cannot be reached' message.
|
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
|
November 08, 2016, 07:54:54 AM |
|
Is anyone else not able to remote into their A4? I have mine online and am able to see that it is using the default IP address with an IP scanner, but whenever I type it into a browser I am getting a 'Site cannot be reached' message.
Just go to www.litecoinpool.organd use that ..it pays 103% and has NO FEE. Works great for me. How I monitor my miners remotely. Any issues on getting on, etc PM me. also sent you a pm on this and thanks for the trust on the escrow I bumped yours up as well here on BTC talk. later |
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:) |
|
|
Nowayz
Newbie
Offline
Activity: 17
Merit: 0
|
|
November 08, 2016, 08:45:55 AM |
|
Thanks Eyedol-X,
I need to change the script as the cgminer log keeps getting overwritten every crash.
Will try to do that and send you a copy with the logging of 24H and image of version 1.0.2.
|
|
|
|
|
gk01
Newbie
Offline
Activity: 5
Merit: 0
|
|
November 08, 2016, 09:30:43 AM |
|
What kind of rates are you guys getting for what coins? How profitable is each unit?
|
|
|
|
|
|
Longsnowsm (OP)
|
|
November 08, 2016, 01:07:05 PM |
|
What kind of rates are you guys getting for what coins? How profitable is each unit?
It hate to say this, because I know how annoying this response is, but "it depends" on what you are mining. If you are mining a single coin like litecoin then you can use a calculator on litecoinpool to get an estimate of what is being paid right at this moment. Hash rates on the A4 seem to be around 240-250mhs. Electricity is around 1070watts. You will need to know your electricity rate to get an idea. If you are on a multicoin pool then there is no way of telling you profitability. Some pools give you an estimate of profitability per MH per day so you can try to estimate based on that. So for example Prohashing tries to tell you how many cents per day per MH, but the fluctuations in coins is so high that it is hard to get a good estimate. Basically you have to stick a miner out there and let it run for a day or two to get an idea of your earnings. So it will depend on which pool you are mining, what type of mining it is, pool specifics, single coin, multicoin etc, fees, and your electricity rates to judge actual profitability. The A4 is a scrypt coin miner so you can mine any coin that is a scrypt coin. I hope this gives you some ideas on how to run down the specifics you are asking for. You also might try WhattoMine.com, go to the ASIC tab on their page and plug in your specifics and get a very rough idea of what to expect. However I almost always find those estimates to be higher than what I actually see. |
|
|
|
|
Inno_ASIC
Full Member
Offline
Activity: 243
Merit: 108
Innosilicon ASIC official representative
|
|
November 08, 2016, 01:17:03 PM
Last edit: November 08, 2016, 03:10:30 PM by Inno_ASIC |
|
Hey guys, Thanks for your feedback! Don't worry, A4 customers will always be protected against any issues. We will provide constant and continuous support on our A4 official miners even after 3 month mining period. We will release a new version firmware within 24 hours and make sure all miners work even better with good profit. Right now, A4 remains the best in the business unchallenged. Any other product claiming to be better than 14nm A4 can not be seen anywhere. Get A4 today and start mining for profit! BTW, right now A4 price remains the same as announced and shipment will still be based on 3 miner per order shipment preference. Thanks very much. Any questions, pls email me at zhangq@innosilicon.com.cn and luojm@innosilicon.com.cn, cheers Chloe Innosilicon marketing |
Innosilicon Mining ASIC official Account
|
|
|
|
Longsnowsm (OP)
|
|
November 08, 2016, 03:59:38 PM |
|
Thanks for the update Chloe. Looking forward to the software update, and the continued support. We have some people asking about another group buy. So maybe we can setup another group buy if you are willing to do that.
Will we get other options to pay? The wire process is cumbersome, time consuming, and costly. It would be great to have other payment options. I think this is a stumbling block for a lot of people. I hope we can come up with a better solution. Thanks again.
|
|
|
|
|
|
