cloudnthings
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 77
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 16, 2016, 03:39:53 AM |
|
On the topic of picking up the miner while visiting China, the answer is yes you can pickup the A4 once they are available at the Inno warehouse in Shenzhen.
For those who have gotten invoices for your orders there was a typo on the invoice that stated the A4 is 260mh. That is incorrect, it should state 280mh. Please reach out to Chloe and ask for an updated invoice with the corrected info.
Neat. Thanks for getting back on this.
|
|
|
|
hdmediaservices
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 16, 2016, 09:46:02 PM |
|
On the topic of picking up the miner while visiting China, the answer is yes you can pickup the A4 once they are available at the Inno warehouse in Shenzhen.
For those who have gotten invoices for your orders there was a typo on the invoice that stated the A4 is 260mh. That is incorrect, it should state 280mh. Please reach out to Chloe and ask for an updated invoice with the corrected info.
But this is assuming you wire them money in advance. I have emailed them, with no response. I would like to tour their facility in August. Also - why won't they deal with a 3rd party escrow? Finally -- this price is not including the PSU? If it uses about 1KW then we would need a 1.2KW supply? So this would add another $200 to $250 if you go for a good one? It would be great if they could create a "mini" version that uses half the power -- as that is so much easier to deal with. Perhaps the best route is to go 220 volts. I don't like units that hover around 1KW. It just sets you up for trouble.
|
|
|
|
Longsnowsm (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 16, 2016, 10:48:39 PM |
|
But this is assuming you wire them money in advance.
I have emailed them, with no response. I would like to tour their facility in August. Also - why won't they deal with a 3rd party escrow?
Finally -- this price is not including the PSU? If it uses about 1KW then we would need a 1.2KW supply? So this would add another $200 to $250 if you go for a good one?
It would be great if they could create a "mini" version that uses half the power -- as that is so much easier to deal with. Perhaps the best route is to go 220 volts.
I don't like units that hover around 1KW. It just sets you up for trouble.
If your wanting to buy one of the pre-order miners and pick it up then yes I would assume you would need to place your order today in order to pick one up at their facility. I don't know why your not getting a response from Inno about your request to visit. If you would like I can ask them about it. On the A4, that is correct, no PSU is included and we will need to invest in a PSU with at least 8 PCIE ports and can handle the miner load. I think several of us are already in that mental process of sorting out the PSU. I have asked Inno for some more info on what they recommend for the PSU. The A4 has 3 "modes", and the turbo mode which runs full out looks like it is going to consume about 896 watts roughly at the miner. However there are 2 slower modes that use less power, and reduce the hash rate. However I see your point in that why pay for the A4 hashing capability when you just want a smaller version. They had smaller versions of the A2. So that is quite possible in the future. But so far we have not heard anything along those lines yet from Inno.
|
|
|
|
hdmediaservices
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 16, 2016, 11:18:18 PM |
|
If anyone could forward the correct email address / their local phone number / their place of business address -- regarding a visit -- I would appreciate it!
I would be wiling to purchase a unit at 2x to 3x the $1800 price in order to test it now and then I'd gladly purchase additional units after a visit to their facility. I'll have a lot of free time on my trip to Asia.
|
|
|
|
wlefever
Legendary
Offline
Activity: 1174
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 16, 2016, 11:29:58 PM |
|
If anyone could forward the correct email address / their local phone number / their place of business address -- regarding a visit -- I would appreciate it!
I would be wiling to purchase a unit at 2x to 3x the $1800 price in order to test it now and then I'd gladly purchase additional units after a visit to their facility. I'll have a lot of free time on my trip to Asia.
Everything you need is on their website http://innosilicon.com/
|
|
|
|
hdmediaservices
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2016, 03:20:35 AM |
|
Well unfortunately I get:
1. A either a voicemail message or a fast busy on the international number 2. No response to my emails 3. The addresses they list are not complete
The other phone number is just some # in Toronto.
|
|
|
|
hdmediaservices
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2016, 03:31:54 AM |
|
Also - why is the "Whois" data for their domain name "Private?" Has it always been this way? This certainly does not make a company sound more legitimate.
I guess one could pay the $49 to Domaintools and take a look at their domain history....
Might be worth it.
I mean even KNCMiner doesn't hide their domain registration.
|
|
|
|
Longsnowsm (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2016, 04:07:07 AM |
|
Also - why is the "Whois" data for their domain name "Private?" Has it always been this way? This certainly does not make a company sound more legitimate.
I guess one could pay the $49 to Domaintools and take a look at their domain history....
Might be worth it.
I mean even KNCMiner doesn't hide their domain registration.
It appears like you say they registered the domain name in Ontario. The domain history is listed on whois: Important Dates Updated Date: 2016-06-17 Created Date: 2006-06-05 Registration Expiration Date: 2017-06-05 Here is the information I get from Chloe at Inno in her email: Chloe Zhang +86 18040500320 Innosilicon Technology Ltd. www.innosilicon.com.cnGive that a try and see if that helps.
|
|
|
|
hdmediaservices
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2016, 04:22:31 AM |
|
Yes - but they elected to conceal their domain registrant information for innosilicon.com. Does that concern anyone? You have to pay extra to do that. I see they have two domains -- one with the .cn (Asian based I guess) and then just then .com that goes to a an ip address in the US shared by 1000's of other sites. Registrant Name: Contact Privacy Inc. Customer 0144618527 Registrant Organization: Contact Privacy Inc. Customer 0144618527 Registrant Street: 96 Mowat Ave Registrant City: Toronto Registrant State/Province: ON Registrant Postal Code: M6K 3M1 Registrant Country: CA Registrant Phone: +1.4165385457 Registrant Phone Ext: Registrant Fax: Registrant Fax Ext: Registrant Email: innosilicon.com@contactprivacy.comThis domain's privacy is protected by contactprivacy.com. To reach the domain contacts, please go to http://www.contactprivacy.com and follow the instructions.
|
|
|
|
Longsnowsm (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2016, 04:35:17 AM |
|
It is different for sure. I wonder how much of this is due to the restrictions in China. I know Chloe is saying she is blocked at this point from being able to login to BCT to post directly. So maybe they intentionally did the domain registration outside, and are screening the company info to avoid getting caught by the "authorities"... Just thinking out loud here since I really don't know a lot about the inner workings of how the internet is managed in China or how much access they have outside.
But is certainly does raise some questions. If they didn't have a good track record here with a previous miner it would certainly be a red flag and not something a "new" company would be able to get away with. Try giving Chloe a call and see if your able to get through to her.
|
|
|
|
hdmediaservices
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2016, 04:37:38 AM |
|
Now - I'm very curious.
The telephone number +86 18040500320 --- is a mobile phone number.
86 -- China country code, then an eleven digit number = cell phone.
The prefix 180 = China Telecom
Please someone correct me if I am wrong -- but their company contact number seems to be a cell phone number through "China Telecom."
That doesn't look good.
The other number is a Canadian cell phone number - I think in Toronto.
Hmmm - interesting -- if you use the "Way Back Machine" to look at older versions of their website -- you will find a landline number listed on their site up until July 2014 -- when the number was taken off. Then at some point the website was redesigned and the cell numbers were listed.
|
|
|
|
hdmediaservices
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2016, 04:52:05 AM |
|
If you check out the book "How To Import From China" by Richard Tong, page 84 it says: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fs32.postimg.org%2Fxypg9i8tx%2Fpage_84.png&t=665&c=ZdzqjufibuGMGA) That's a big red flag.
|
|
|
|
cloudnthings
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 77
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2016, 09:01:20 AM |
|
I hear ya on the red flags and all your points are valid. As others have noted, I guess it is how much risk individuals are willing to take. Seems like some are ok with the risk, hence the order of 76 or whatever that number is/was.
The PSU interested me. So say I have a 1000W PSU with 6 connectors. Can't I just chop a set of wires and make/loop another connector of it? I mean if the A4's take 1000W and I have a 1000W PSU, then it's just an issue of figuring out the wiring. This sounds a bit safer/easier than rigging 2 PSUs together?
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2016, 11:35:14 AM |
|
I hear ya on the red flags and all your points are valid. As others have noted, I guess it is how much risk individuals are willing to take. Seems like some are ok with the risk, hence the order of 76 or whatever that number is/was.
The PSU interested me. So say I have a 1000W PSU with 6 connectors. Can't I just chop a set of wires and make/loop another connector of it? I mean if the A4's take 1000W and I have a 1000W PSU, then it's just an issue of figuring out the wiring. This sounds a bit safer/easier than rigging 2 PSUs together?
Well I have not ordered one yet. (even thou I'm babysitting some coming here to move along) That may change I'm weak willed. But anyway if I was gonna run these I would run them like the Titans with the 2 prong psu adapter like the knc y adapter. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi.imgur.com%2FjzInHqs.jpg%26t%3D566%26c%3DQ-nwgTUPcwy0Vg&t=665&c=VZEYaStTT1g_LQ) and 2 psu's of at least 860 watts (over kill I know but I likes them big ) ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) so you would have 2 leads to each psu end. Also nothing less then a psu with lowest of 16awg wire also IMHO my 2c on this ...why jam it all up on 1 psu....seems silly with what folk have seen happen to psu's running 24/7 for months Anyway if I was getting an A4 I'd do this. I'd also run it 220v thru this (saved my ass in storms 3x..wiped the SD cards so without them my Titans would likely be bricks now) https://www.amazon.com/Tripp-Lite-International-Protector-EURO-4/dp/B00006HZ4M/ref=sr_1_1?ie=UTF8&qid=1468755216&sr=8-1&keywords=euro+tripp+liteYou can usually find them for 1/2 that price on eBay. Check out my complete setup at (or most of it anyway in the basement some hosted) at lostgonzo.imgur.combeing paranoid that is how I'd do it overkill thou it may be ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
usao
Legendary
Offline
Activity: 1109
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 17, 2016, 11:56:16 AM |
|
If the total requirement is for 1KW, over 8 PCIe plugs, that's 125W per connector, which at 12V would be between 11A-12A per connector. Given 3 positive leads in a connector, that's a requirement for a min of 4A per wire. 16AWG wire carries just under 4A, so you would need 15AWG or better per pin to be just on the safe side.
Im going to use a LEPA G1600, which has 4x 30A 12V rails, so each rail can be easily split into to 2x 15A PCIe plugs. Im going this route because I have some left over from other miners.
You could basically run a 100A 12V supply and split that into the 8x PCIe plugs also. Those are pretty common as "server" power supplies, but I have noticed that they often don't have the heat dissipation as stand-alone power supplies. They seem to rely on the case fans to push air through them for cooling, and the little internal fan in the server power supplies doesn't have enough CFM to do the job.
Others have noted that the PSU's used on the A7/A9 can do the job, and as long as you don't overheat the PSU that's true. The server PSU's are cheaper also.
I like the idea of running a pair of 750W PSU's per miner though, since I can get 2 of those for less than a single LEPA G1600.
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2016, 08:41:02 AM |
|
Again I have not pulled the trigger on an A4 but doing the numbers I get this. (I am using the free below calculator to do so) www.litecoinpool.org/calcI'm using the following figures (hosting 12c kwh w/fees) at 280mh and 1000 watts (been my experience asic's always run higher watts then the specs) at $4.10 LTC price I get the following A4 price of with shipping ($2,000 usd?) add MY dual 2560 server platinum psu rigs for total of 300 bucks (maybe double that if 2 psu's at your end) I get $2300 complete. the link to the hack to do so below ..and you can either get a heavy duty backplate (15awg) or just add your own as a previous poster mentioned to make such 15awg when modding the backplate. https://bitcointalk.org/index.php?topic=1545455.msg15533861#msg1553386124 hours 2.80509961 LTC 11.50 USD 2.88 USD 8.62 USD 7 days 19.63569727 LTC 80.51 USD 20.16 USD 60.35 USD 30 days 84.15298828 LTC 345.03 USD 86.40 USD 258.63 USD So ASSUMING by some chance difficulty was to remain the same (snicker) or maybe by circumstances of LTC price and difficulty rise balancing out to the same (snicker snicker) I get 8.89 months for ROI..... Kinda ugly ...and my server psu rig is 1/2 the cost of what I'd get instead ..that is 2 corsair 1200i's at 300 usd each Newegg (on their monthly sale) so sheesh...MAYBE you could run this beastie with ONE PSU..my experience with Titans I'd rather run 2 Corsair 1200i's and over kill with their 16awg wires running 1/2 and KNC PSU splitters additional protection. A corsair 860i would probably be over kill but I have Titans and switch around so would need the Corsair 1200i's etc in case if not running the above server psu hack in the Jupiter case. Thus my savings of 300 over what I'd spend ..just saying.. With the expected difficulty rise in LTC from the A4's and the sale to the big boy data halls before us (investors they got) we need a heck of a lot better price point then $4.10 ltc imho anyway just my view on pondering this...but damn we need BTC to pump and LTC to follow damn it !
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
usao
Legendary
Offline
Activity: 1109
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2016, 09:50:17 AM |
|
Im still wondering if you can use 2 PSU's per rig. If so, then I can re-use several of my PSU's from other rigs I have decommissioned. That will save me the net cost of purchase. I already have a Lepa G1600, which will cover one rig, and a Seasonic x-1200, which should cover a second rig. I have several 1000, 850 and 750's left over, which I would like to cobble together for the other rigs, but that depends on being able to use multiple PSU's on a single rig. Im thinking all I need to do is tie the grounds together for the PSU's for a single rig, then I could use multiple rigs and I won't have to purchase any more PSUs, but I haven't heard back from anyone saying if that is possible.
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2016, 09:56:25 AM |
|
Im still wondering if you can use 2 PSU's per rig. If so, then I can re-use several of my PSU's from other rigs I have decommissioned. That will save me the net cost of purchase. I already have a Lepa G1600, which will cover one rig, and a Seasonic x-1200, which should cover a second rig. I have several 1000, 850 and 750's left over, which I would like to cobble together for the other rigs, but that depends on being able to use multiple PSU's on a single rig. Im thinking all I need to do is tie the grounds together for the PSU's for a single rig, then I could use multiple rigs and I won't have to purchase any more PSUs, but I haven't heard back from anyone saying if that is possible.
Well hell you'd think so...don't know too many units that expect to use 8 slots on a psu w/o either y psu adapters (2 lines into plug) or just 2 psu's.....I mean you probably could use 1 psu..but myself (for reasons stated with use as titan psu backups and swaps perhaps in previous post) I'd always use 2 if I could.... as to my server psu plug in the previous post these are 2 server psu's plug'd into the backplate..each is platinum 1280 watts each....they ACT like 1 psu however and you can get better 15 awg backplates and/or just put 15awg wire on them yourself (thou I think 16 awg is plenty the backplate I have came with 15 awg) so anyway my way of saving bucks ...I think they go for 120 with shipping on ebay now (got mine cheaper for 100 bucks about) mine were also new with backplate cabling etc was 300 bucks and works great. anyway I guess the backplate is the issue ..I think they are common? For details on this kinda thing ask Maxumark he has made a few but that is what I'm probably gonna go with from now on for running my rigs...works great half the price of 2 corsair 1200i psu's ...so wth ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
usao
Legendary
Offline
Activity: 1109
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2016, 10:40:47 AM |
|
Ive never used 2 PSU's together in the same rig before, im just worried about stuff like onr PSU back feeding into the other if their +12V signals are slightly different. Ive seen titan use a pcie splitter but I was nervous about hooding 2 PSU's together in parallel this way. Ive seen issues with batteries in parallel where one battery is lower than the otherr and the first drains to feed the second, and im wondering if the same would happen when you plug the PCIe ports together from different PSUs. Since these are not batteries, it may cause current to flow between the PSU's instead of into the rig.
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2016, 01:20:46 PM |
|
Ive never used 2 PSU's together in the same rig before, im just worried about stuff like onr PSU back feeding into the other if their +12V signals are slightly different. Ive seen titan use a pcie splitter but I was nervous about hooding 2 PSU's together in parallel this way. Ive seen issues with batteries in parallel where one battery is lower than the otherr and the first drains to feed the second, and im wondering if the same would happen when you plug the PCIe ports together from different PSUs. Since these are not batteries, it may cause current to flow between the PSU's instead of into the rig.
Titans KNC said need 2psu's. My dual in one backplate psu are made to run dual. With the capacity I should easily run 6 cubes. Because of such no splitter with psu leads. Direct not modular at backplate and 15awg wire too boot. No adapter of the y type. Cool to the touch less heat and fail points with morale psu's and less connection fail points. W/o y adapter anyway my view
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
|