[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[tytanick]

Hi T,

What is the definition/status information of the following in smOS?

1. "SEE CONSOLE..."

2. "NO SCREEN SESSION FOUND..."

Thanks

1. This status is show when you are not using claymore. only claymore had API with mining speeds so its easy to sho it directly on panel.
Other miners dont have any api so only way to look is by looking into console of this miner..

2. This is always at the beginning, if this presists more than 2 minutes then something is wrong,

[alelosbrigia]

after 1 month  24/24/7/7 i can say .... well done man ! and with last update with atiflash   is a perfect work donation coming  

https://blockchain.info/tx-index/4efca2c3e9ff07b10538b38297178d3df19f3d2e2b76b46895ce3dc35c3bd21d

[evakka]

hi tytanick

i am trying to mine komodo in supernova pool but with no results.
i suppose komodo (or any other not so "famous" algo) is not supported correct?

thanks

[tytanick]

after 1 month  24/24/7/7 i can say .... well done man ! and with last update with atiflash   is a perfect work donation coming  

https://blockchain.info/tx-index/4efca2c3e9ff07b10538b38297178d3df19f3d2e2b76b46895ce3dc35c3bd21d

I have nearly completed RX OS Overclocking to specific MHZ core and memory.
Also there will be very dummy undervolting (i came up with this idea and its accually working )

[tytanick]

hi tytanick

i am trying to mine komodo in supernova pool but with no results.
i suppose komodo (or any other not so "famous" algo) is not supported correct?

thanks

It is supported, its normal equalihash algho (this from zcash)
use claymore-zec miner or optiminer

[thedue]

optiminer
-s komodopool.com:7779 -u RVQS9NGKsbBJuKDhJnPssTRevrE428dxDK -p x

[thedue]

after 1 month  24/24/7/7 i can say .... well done man ! and with last update with atiflash   is a perfect work donation coming  

https://blockchain.info/tx-index/4efca2c3e9ff07b10538b38297178d3df19f3d2e2b76b46895ce3dc35c3bd21d

I have nearly completed RX OS Overclocking to specific MHZ core and memory.
Also there will be very dummy undervolting (i came up with this idea and its accually working )

New options (e.g. 1850 instead of 6) are already showing up but do not work so far  

[tytanick]

New options (e.g. 1850 instead of 6) are already showing up but do not work so far  

Yep, i changed layout but i didnt release update.
There is a little issue and i need to fix it first.
All things works as previous, you can set dpm lecel an % OC in memory.
I will release this update tomorrow.

I reverted visual changes no to confuse you guys.
I need to do little more tests.

[alelosbrigia]

il solved with bios mod just change max freq of gpu an vram  , after from panel just  put down or up 

[Talat10gu]

New options (e.g. 1850 instead of 6) are already showing up but do not work so far  

Yep, i changed layout but i didnt release update.
There is a little issue and i need to fix it first.
All things works as previous, you can set dpm lecel an % OC in memory.
I will release this update tomorrow.

I reverted visual changes no to confuse you guys.
I need to do little more tests.

Keep the work going man.
smOS best 

[citronick]

Hi T,

The status - counter feature is very good and useful.

I could see immediately that I have to check 3 rigs that are still alive but has registered reboots or restarts.

Can you confirm, when the counter starts? During miner's WD process (restart) OR SRR's reboot (OS reboot)?

Thanks

[citronick]

Hi T,

Is it possible to show SRR info, without going to "MORE" menu?

For example, maybe under RIG NAME...

MyRigName
SRR: 1/2

1/2 = srr serial number/slot number

If no SRR, then maybe "SRR: NA" or no display or blank.

This way, at one glance from dashboard, you could see correct SRR info to trigger manual reset on SRR. This could be useful in troubleshooting or testing overclocking.

Thanks

[bughatti]

Do you plan to incorporate a watt usage metric on the page?  If not can anyone give a suggestion on best tool to show wattage usage in linux?

[isgtss]

Is there any way to fasten konky manager there ready-made modules displaying many necessary parameters?

[xleejohnx]

Has anyone tried to load this into ram over the network?
I have tftp server running on my network and I can't seem to get this to boot fully into ram
Seems silly to do this with USB prices so low but this is just for funs really

[tytanick]

Can you confirm, when the counter starts? During miner's WD process (restart) OR SRR's reboot (OS reboot)?

This adds each time the miner starts so reload and reboot and SRR reboot - all will add +1 to this counter.
I will also make soon button "RESET ALL COUNTERS" - i think this will be usefull and no need to do detained history reboots.

Hi T,
Is it possible to show SRR info, without going to "MORE" menu?
For example, maybe under RIG NAME...
MyRigName
SRR: 1/2
1/2 = srr serial number/slot number
If no SRR, then maybe "SRR: NA" or no display or blank.
This way, at one glance from dashboard, you could see correct SRR info to trigger manual reset on SRR. This could be useful in troubleshooting or testing overclocking.
Thanks

I have plans for making all informations in table but you will be able to select WHICH COLUMNS you want to SHOW/HIDE.
I think its best solution
So if you will want to search ip addres then you will just need to show ip collumn and then ctrl+f.
And when no needed you can disable this column

Do you plan to incorporate a watt usage metric on the page?  If not can anyone give a suggestion on best tool to show wattage usage in linux?

Wattage of what ? In OS you cant really know how much does gu takes, those numbers are not right.
Best way is to buy analog watt meter and plug in lone rig to it and do the modifications and check which are best.

Is there any way to fasten konky manager there ready-made modules displaying many necessary parameters?

Can you ask again ? I dont understand this.

Has anyone tried to load this into ram over the network?
I have tftp server running on my network and I can't seem to get this to boot fully into ram
Seems silly to do this with USB prices so low but this is just for funs really

This is idea that i had few months agon.
One PC with PXE boot delivery and each rig with Ethernet boot.
It is more less ok. But...
I resigned this feature becasue lets say we have 1000 PC farm.
After power failure it would take ages to transfer 2GB of data to 1000 rigs
With 1 Gbit network it would take 20480seconds (5 hours)
with 100 rigs it would be 30 minutes to boot all rigs.
Any thoughts ?
Meaby for small deployments between 10-50 rigs it would make sense but not less becasue extra PC costs, and not more becasue it will eat 1 GBit.s right ?
Anyway i thought about this and i wanted to do this but calculating numbers just discouraged me to do this

[tytanick]

Update v1077:
- in RX OS you can now overclock to specific MHz values (like core: 1055 mem: 1988)
NOTE: you can write new specific MHz values and save it, but after that you need to do one reboot of your rig

- in RX OS added little undervolt option in which you can write values from 0 to 7.
NOTE: Default value is 5 and up to 7 its save. Lower values like 3-4 sould be also stable but 0-2 propably not.
When you will write there lower values your rig can freeze !!! so be advised and test this when you are near rigs !
Also REFRESH dahsboard WEBSITE


- total restarts count - means how much times does your rig started miner (so how many reboots or reloads)
Soon i will add also "reset counter for all rigs" feature. Now you can monitor how may times does your rigs is restarting and if too much then lower clocks or less undervolting.

[xleejohnx]

Can you confirm, when the counter starts? During miner's WD process (restart) OR SRR's reboot (OS reboot)?

This adds each time the miner starts so reload and reboot and SRR reboot - all will add +1 to this counter.
I will also make soon button "RESET ALL COUNTERS" - i think this will be usefull and no need to do detained history reboots.

Hi T,
Is it possible to show SRR info, without going to "MORE" menu?
For example, maybe under RIG NAME...
MyRigName
SRR: 1/2
1/2 = srr serial number/slot number
If no SRR, then maybe "SRR: NA" or no display or blank.
This way, at one glance from dashboard, you could see correct SRR info to trigger manual reset on SRR. This could be useful in troubleshooting or testing overclocking.
Thanks

I have plans for making all informations in table but you will be able to select WHICH COLUMNS you want to SHOW/HIDE.
I think its best solution
So if you will want to search ip addres then you will just need to show ip collumn and then ctrl+f.
And when no needed you can disable this column

Do you plan to incorporate a watt usage metric on the page?  If not can anyone give a suggestion on best tool to show wattage usage in linux?

Wattage of what ? In OS you cant really know how much does gu takes, those numbers are not right.
Best way is to buy analog watt meter and plug in lone rig to it and do the modifications and check which are best.

Is there any way to fasten konky manager there ready-made modules displaying many necessary parameters?

Can you ask again ? I dont understand this.

Has anyone tried to load this into ram over the network?
I have tftp server running on my network and I can't seem to get this to boot fully into ram
Seems silly to do this with USB prices so low but this is just for funs really

This is idea that i had few months agon.
One PC with PXE boot delivery and each rig with Ethernet boot.
It is more less ok. But...
I resigned this feature becasue lets say we have 1000 PC farm.
After power failure it would take ages to transfer 2GB of data to 1000 rigs
With 1 Gbit network it would take 20480seconds (5 hours)
with 100 rigs it would be 30 minutes to boot all rigs.
Any thoughts ?
Meaby for small deployments between 10-50 rigs it would make sense but not less becasue extra PC costs, and not more becasue it will eat 1 GBit.s right ?
Anyway i thought about this and i wanted to do this but calculating numbers just discouraged me to do this

Theoretically Pxe for mass deployment wouldn't be wise at all
But for something small it would be worth having for that moment you forgot to get a hard drive or USB
I can't get the compressed Img of smos to boot.
This is more of less for me to do as a hobby/option for future involvement 

[tytanick]

Theoretically Pxe for mass deployment wouldn't be wise at all
But for something small it would be worth having for that moment you forgot to get a hard drive or USB
I can't get the compressed Img of smos to boot.
This is more of less for me to do as a hobby/option for future involvement 

I never had a chance to do PXE boot so i really dont know how to do this

[xleejohnx]

Theoretically Pxe for mass deployment wouldn't be wise at all
But for something small it would be worth having for that moment you forgot to get a hard drive or USB
I can't get the compressed Img of smos to boot.
This is more of less for me to do as a hobby/option for future involvement 

I never had a chance to do PXE boot so i really dont know how to do this

It is very simple to get a pxe server up and going
I think I'm having a memory issue. I am only using 8gb of ram for a 7.7gb os lol