[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[FFI2013]

With the latest update can you now set specific hashrates with different rates ex 1050,1075,1150

[thedue]

this is GREAT man! thanks a lot... will try and tell how its working out for me

[tytanick]

With the latest update can you now set specific hashrates with different rates ex 1050,1075,1150

Yes you can do this but accually i am not sure if gpus will be initialized in the same orer after reboot.
I still didnt have time to specify this.
If you will figure out tell me
anyway you can

Core: 1010,1020,1030
Memory: 2000,2010

When you specify like that then
GPU0 1010/2000
GPU1 1020/2010
GPU2 1030/2010
GPU3 1030/2010
etc
So if there is more gpus than you specified in config then they will use last value.

[thedue]

What exacty stand the undervolting values for?

[tytanick]

What exacty stand the undervolting values for?

I thought nobody will ask
Its my idea ov undervolting.
It is DPM level which you want modyfy and set your clocks.
Each dpm has specified voltage so taking lower and lower will result in more less undervolting until it will be unstable.
You can compare wattage you have with the same clocks on dpm 7 and dpm 4.
DPM 3 shoudl also work, meaby 2 too, but 1 and 0 will propably hang/freeze rig
I myself have in most rigs values of 3 (but i also have offset underfolting in custom bioses)

[philipma1957]

okay I set all my rigs to underplot 3

i use 16 amps x 240 volts

[tytanick]

test on one. also noye wattage before and after.

[citronick]

okay I set all my rigs to underplot 3

i use 16 amps x 240 volts

I am setting mine to 1100/2125/5, since all my ROMS are custom for low power already.

Will let the 3 rigs for testing in RX farm overnight with this settings to test stability.

I will monitor the counter for high reset/reboot/reloads.

[philipma1957]

okay I set all my rigs to underplot 3

i use 16 amps x 240 volts

setting 3 uses 16 amps




setting 2 uses 16 amps  which is due to   the pdu meter not more accurate the 1 amp.

I will do a better meter test.  later today.

[tytanick]

btw guys you can write old values like

core 5
mem 8
powerlimit dont have usage here

this will also work as old schema because i had to leave for people that wont change values to new and rig will reboot.

or new schema
core 1100
mem 2000
undervolt 4

anyway as old works and new you can compare wattage results and post them here, please do that.

Do you like this update right ?
This tool costs me 0,15 btc

[xleejohnx]

btw guys you can write old values like

core 5
mem 8
powerlimit dont have usage here

this will also work as old schema because i had to leave for people that wont change values to new and rig will reboot.

or new schema
core 1100
mem 2000
undervolt 4

anyway as old works and new you can compare wattage results and post them here, please do that.

Do you like this update right ?
This tool costs me 0,15 btc

What's your btc address I'll help offset that price.

[thedue]

Well I can´t see any difference :/ so far

3 / 6 old = 125W for my testrig 1 GPU RX470 - SGminer XMR
1050 / 1850 / 3 = 125W

And yes, BTC adress?

[tytanick]

What's your btc address I'll help offset that price.

My BTC address is this DONATIONS GOES HERE:
1ERRVbvV23h51ScH73nQr6TDmaieKNuuVD

If anybody will send me some cash, please write me email to admin@simplemining.net with tx info and amount with your email that you are using in simplemining.net .
It would be not so good if you guys send me some cash now and i will implement in some near time fee system, you would pay double, thats why please send me email.

[tytanick]

Well I can´t see any difference :/ so far

3 / 6 old = 125W for my testrig 1 GPU RX470 - SGminer XMR
1050 / 1850 / 3 = 125W

And yes, BTC adress?

I think you didnt rebooted your today ?
If not then try reboot it first becasue new system of overclocking wont work.
Try setting 1051 1851 and see if it will set those values.
Compare DPM 7 and 3 - is there any difference ?

Accually if you had before:
core dpm 3
memory 8

and now you will write ther same clocks bt in values like
1050/1850 and 3
then the same dpm state is used so it wont do any overclock.
If so, you could try setting dpm 2 instead of 3 and if the rig wont freeze then you should see some results propably.

Tell me your tests.

[philipma1957]

What's your btc address I'll help offset that price.

My BTC address is this DONATIONS GOES HERE:
1ERRVbvV23h51ScH73nQr6TDmaieKNuuVD

If anybody will send me some cash, please write me email to admin@simplemining.net with tx info and amount with your email that you are using in simplemining.net .
It would be not so good if you guys send me some cash now and i will implement in some near time fee system, you would pay double, thats why please send me email.

just sent .0101

https://blockchain.info/address/1ERRVbvV23h51ScH73nQr6TDmaieKNuuVD

https://blockchain.info/tx/f13abd65c955918393ab63bcb41fffc81b825d88d68ecaa0851277376b75e031


I think I have sent you 3 donations  total of 0.03121111



this was me on the 3rd of march

https://blockchain.info/tx/1758f19e67b4c225c465b499885ce418e3fa3f98188453101ff7152dc8a3be45


the 19th of feb  0.01
https://blockchain.info/tx/cecb33d9494d65ac8b4df0f19fb92c91a754e67172757a365ca4f16e01602be9


I send the coin from bittrex.com

[xleejohnx]

What's your btc address I'll help offset that price.

My BTC address is this DONATIONS GOES HERE:
1ERRVbvV23h51ScH73nQr6TDmaieKNuuVD

If anybody will send me some cash, please write me email to admin@simplemining.net with tx info and amount with your email that you are using in simplemining.net .
It would be not so good if you guys send me some cash now and i will implement in some near time fee system, you would pay double, thats why please send me email.

Sent .075 btc

https://blockchain.info/address/1ERRVbvV23h51ScH73nQr6TDmaieKNuuVD

https://btc.blockr.io/tx/info/75b9b18bfda7d726b63cfd1f84de2f3f3df711e9d7a1cc445d8129b1722da163

[philipma1957]

I pm'd and emailed.

Note I have  2 accounts one is just the pandaminer  one is 8 pc's

they uses separate emails.

So far I am in for 0.03121111 btc.  I will send more. Down the road.

note I am sending the coin with my bittrex.com account

[thedue]

Well I can´t see any difference :/ so far

3 / 6 old = 125W for my testrig 1 GPU RX470 - SGminer XMR
1050 / 1850 / 3 = 125W

And yes, BTC adress?

I think you didnt rebooted your today ?
If not then try reboot it first becasue new system of overclocking wont work.
Try setting 1051 1851 and see if it will set those values.
Compare DPM 7 and 3 - is there any difference ?

Accually if you had before:
core dpm 3
memory 8

and now you will write ther same clocks bt in values like
1050/1850 and 3
then the same dpm state is used so it wont do any overclock.
If so, you could try setting dpm 2 instead of 3 and if the rig wont freeze then you should see some results propably.

Tell me your tests.

This is kind of confusing  

I had:

3 / 6
which gave me exactly 1031 / 1855 = 125W

Now:
1050 / 1850 / 3 = 125W

so the clocks are different already if that is what you wanted me to try?

Even if I use the exact clocks with the new system = 125W

I CAN change the 125W but only up to 140W using undervolting = 7

---

Weired for my head but I already had the best setting with the old system NOT undervolting my gpus?!?  

[thedue]

Sent 0.01 too, details --> email

come on guys.. even smaller miners can afford 0.01 

[tytanick]

Weired for my head but I already had the best setting with the old system NOT undervolting my gpus?!?  

I would say this different way:
Previous this dpm was autoselected, now i give user the chice.
What about dpm 2 and 1 ? Freezing your rigs or working and little less wattage ?

EDIT: also 125 watts whole system with one GPU RX470 at 26-27MH/s is very good verult