gaah
Newbie
Offline
Activity: 56
Merit: 0
|
|
December 03, 2016, 01:07:24 PM |
|
Please be patient, now it takes a lot of time to improve speed. As I said before, it's possible to get good speedup but don't expect 30-50% speedups anymore and new versions every day, main speed racing is over.
So will you drop 9.0 today?
|
|
|
|
DStefanov
|
|
December 03, 2016, 01:10:30 PM |
|
Hello, Pray for some help on the following problem! What this means, fence in the red rectangle?
........................................................................
It appears occasionally and stop digging. It is very unpleasant because it can occur after 15 minutes, but can also be done after 3 hours? How do I solve this problem? If it is important that the intensity is 6. Thanks!
More volt and/or lower intensity needed. This only applies to GPU 0 or all 6 cards? Just for GPU0. Virtual memory doesnt help. It's the riser. I can tell you. What VER riser is it you use on GPU 0? The version of risers that use of all cards is ver 006!
|
|
|
|
manotroll
|
|
December 03, 2016, 01:12:24 PM |
|
6x 480 give me average 1250 h/s 208 - 210 h/s each
And I am not the only one...
which settings? I have 480 OC 8gb and getting about 202 h/s, but i think to much W from the wall - 160W! gpu clock 1410 memory clock 2020 Your consumption is very high
|
|
|
|
tjeldik
Newbie
Offline
Activity: 22
Merit: 0
|
|
December 03, 2016, 01:12:52 PM |
|
what are you guys doing with the mined ZEC? keep them in zec or exchange to BTC
|
|
|
|
gaah
Newbie
Offline
Activity: 56
Merit: 0
|
|
December 03, 2016, 01:14:23 PM |
|
what are you guys doing with the mined ZEC? keep them in zec or exchange to BTC
They are so low now so keep them.
|
|
|
|
tjeldik
Newbie
Offline
Activity: 22
Merit: 0
|
|
December 03, 2016, 01:27:02 PM |
|
what are you guys doing with the mined ZEC? keep them in zec or exchange to BTC
They are so low now so keep them. my idea too
|
|
|
|
needhelp2
Newbie
Offline
Activity: 19
Merit: 0
|
|
December 03, 2016, 01:33:19 PM Last edit: December 03, 2016, 01:49:48 PM by needhelp2 |
|
Funny, so I've installed windows on one rig, Win 10 Pro, especialy for Claymore 8 and my 480's and like 10 years go, Win freezes completely on a random basis Just one of the many reasons serious miners prefer LINUX. Why, cause "Linux doesn't freeze"? 1) LINUX is infinitely more stable than Windows (which isn't saying much). I have LINUX machines that have run with no outages (hardware failure, shut down to physically MOVE the machine, and power outages excluded) since before Windows XP EXISTED - literally. The only Windows machine I've EVER had go a year without crashing was a NT 3.51 SP5 machine - vs MORE THAN 20 YEARS for some of my LINUX machines that were running the same user programs. 2) If you have a power outage, your miner running under Windows won't restart when power comes back on 'till you LOG IN MANUALLY (I have yet to see any miner program that could be run a a service). LINUX makes it easy to set up so the miner will restart automatically after a power outage. IMO the only thing Windows has going for it are that the overclock/fan control programs available for it like Afterburner are a lot better. So you have 20 years of practice and still haven't learned to use search engines? Or linux aces who never update their machines never update their brain content too? 2) BitMoose and/or built in Task Scheduler Warning: Enable Automatic logon only if you are the sole user of your computer.Your password helps keep your account secure, no matter what PC you sign in to or what apps, settings, and services you use while you're signed in. 1. Right click on Start and select Run, type Netplwiz and then press Enter key. 2. In the resulting User Accounts dialog, select your user account first and then uncheck the option labelled Users must enter a user name and password to use this computer. Click Apply button to see Automatically sign in box. 3. In the Automatically sign in dialog, type your password and then re-enter the password to confirm the same. 4. Click on OK to save the changes. 5. Restart your PC to see your Windows 10 automatically logging into your account without asking you to enter the password. Put shortcuts for batch files you use to start your miners in this directory : C:\Users\(your user name)\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup use a timeout command as first line in batch file so windows can get fully loaded and stable before miner is started > like this timeout 120
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool us1-zcash.flypool.org:3333 -zwal your t address.worker name -zpsw z ( any command variables you use )
this way if windows restarts for any reason it will log in automatically and start mining after the timeout # of seconds
|
|
|
|
Yerba
Member
Offline
Activity: 146
Merit: 10
|
|
December 03, 2016, 01:50:00 PM |
|
Funny, so I've installed windows on one rig, Win 10 Pro, especialy for Claymore 8 and my 480's and like 10 years go, Win freezes completely on a random basis Just one of the many reasons serious miners prefer LINUX. Why, cause "Linux doesn't freeze"? 1) LINUX is infinitely more stable than Windows (which isn't saying much). I have LINUX machines that have run with no outages (hardware failure, shut down to physically MOVE the machine, and power outages excluded) since before Windows XP EXISTED - literally. The only Windows machine I've EVER had go a year without crashing was a NT 3.51 SP5 machine - vs MORE THAN 20 YEARS for some of my LINUX machines that were running the same user programs. 2) If you have a power outage, your miner running under Windows won't restart when power comes back on 'till you LOG IN MANUALLY (I have yet to see any miner program that could be run a a service). LINUX makes it easy to set up so the miner will restart automatically after a power outage. IMO the only thing Windows has going for it are that the overclock/fan control programs available for it like Afterburner are a lot better. 2) netplwiz run - shell:startup ( you can run whatever You want after power outage ). No manual logon required. Just for information..
|
|
|
|
Rkana
Sr. Member
Offline
Activity: 281
Merit: 250
RK Coin Services - Alt Coins Dev (ETH-BTC & More)
|
|
December 03, 2016, 01:50:39 PM |
|
what are you guys doing with the mined ZEC? keep them in zec or exchange to BTC
They are so low now so keep them. my idea too You guys realize you are not fooling anyone here.
|
I Do COIN SERVICES (WEB JsWALLET + INSIGHT EXPLORER | ELECTRUM) I Can Make You an ETH OR BTC ALTCOIN And OTHER COIN DEVELOPMENT - PM Me For More Info
|
|
|
Jinx99
Member
Offline
Activity: 91
Merit: 10
|
|
December 03, 2016, 02:29:25 PM |
|
setx GPU_FORCE_64BIT_PTR 0 Bad idea for RX series. From here: GPU_FORCE_64BIT_PTR 0 BHИMAHИE!!!! Пo вoзмoжнocти нe иcпoльзyйтe дaннyю пepeмeннyю ("пaдeниe" пpoгpaммы пpи paбoтe c кapтaми RX cepии)
|
|
|
|
supersonic
|
|
December 03, 2016, 02:35:27 PM |
|
Guys, which MB did You test and recommend for 7gpu rigs? Beside MSI z97 gaming 5 that one is doin fine.
|
Nice from far but far from nice
|
|
|
Marvell1
Legendary
Offline
Activity: 2464
Merit: 1105
Leading Crypto Sports Betting & Casino Platform
|
|
December 03, 2016, 02:44:31 PM |
|
eth uses too much power compared to zec so for me its basically a wash still i think diff will drop as the greedy farms move back to eth
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
Altcoining
|
|
December 03, 2016, 03:12:39 PM |
|
Funny, so I've installed windows on one rig, Win 10 Pro, especialy for Claymore 8 and my 480's and like 10 years go, Win freezes completely on a random basis Just one of the many reasons serious miners prefer LINUX. Why, cause "Linux doesn't freeze"? 1) LINUX is infinitely more stable than Windows (which isn't saying much). I have LINUX machines that have run with no outages (hardware failure, shut down to physically MOVE the machine, and power outages excluded) since before Windows XP EXISTED - literally. The only Windows machine I've EVER had go a year without crashing was a NT 3.51 SP5 machine - vs MORE THAN 20 YEARS for some of my LINUX machines that were running the same user programs. 2) If you have a power outage, your miner running under Windows won't restart when power comes back on 'till you LOG IN MANUALLY (I have yet to see any miner program that could be run a a service). LINUX makes it easy to set up so the miner will restart automatically after a power outage. IMO the only thing Windows has going for it are that the overclock/fan control programs available for it like Afterburner are a lot better. This leads me to belive that you have used windows for less then a day...
|
|
|
|
HashZilla
Member
Offline
Activity: 89
Merit: 10
|
|
December 03, 2016, 03:16:00 PM |
|
setx GPU_FORCE_64BIT_PTR 0 Bad idea for RX series. From here: GPU_FORCE_64BIT_PTR 0 BHИMAHИE!!!! Пo вoзмoжнocти нe иcпoльзyйтe дaннyю пepeмeннyю ("пaдeниe" пpoгpaммы пpи paбoтe c кapтaми RX cepии)
What does that say in English please?
|
|
|
|
th00ber
|
|
December 03, 2016, 03:20:51 PM |
|
Funny, so I've installed windows on one rig, Win 10 Pro, especialy for Claymore 8 and my 480's and like 10 years go, Win freezes completely on a random basis Just one of the many reasons serious miners prefer LINUX. Why, cause "Linux doesn't freeze"? 1) LINUX is infinitely more stable than Windows (which isn't saying much). I have LINUX machines that have run with no outages (hardware failure, shut down to physically MOVE the machine, and power outages excluded) since before Windows XP EXISTED - literally. The only Windows machine I've EVER had go a year without crashing was a NT 3.51 SP5 machine - vs MORE THAN 20 YEARS for some of my LINUX machines that were running the same user programs. 2) If you have a power outage, your miner running under Windows won't restart when power comes back on 'till you LOG IN MANUALLY (I have yet to see any miner program that could be run a a service). LINUX makes it easy to set up so the miner will restart automatically after a power outage. IMO the only thing Windows has going for it are that the overclock/fan control programs available for it like Afterburner are a lot better. This leads me to belive that you have used windows for less then a day... +1 My Windows account on the rig don't have a password, so no log in requiered. I have set "bcdedit /set {current} bootstatuspolicy ignoreallfailures" (in cmd as admin) So if the Windows restart, it will not be stuck in the "repair tool' and will boot normally And I haved added the shortcut to my miner.bat in the "Startup" folder, so it will start automatically And last thing, If the claymore miner crash, the reboot.bat is "shutdown /r /t 5", so auto restart the whole rig With that, I never have problem on my windows rig
|
|
|
|
HerrDirektor
Member
Offline
Activity: 70
Merit: 10
|
|
December 03, 2016, 03:27:41 PM |
|
setx GPU_FORCE_64BIT_PTR 0 Bad idea for RX series. From here: GPU_FORCE_64BIT_PTR 0 BHИMAHИE!!!! Пo вoзмoжнocти нe иcпoльзyйтe дaннyю пepeмeннyю ("пaдeниe" пpoгpaммы пpи paбoтe c кapтaми RX cepии)
What does that say in English please? WARNING! If possible, do not use this variable ("fall" (crash) of the program while working with cards RX Series)
|
|
|
|
manotroll
|
|
December 03, 2016, 03:28:56 PM |
|
setx GPU_FORCE_64BIT_PTR 0 Bad idea for RX series. From here: GPU_FORCE_64BIT_PTR 0 BHИMAHИE!!!! Пo вoзмoжнocти нe иcпoльзyйтe дaннyю пepeмeннyю ("пaдeниe" пpoгpaммы пpи paбoтe c кapтaми RX cepии)
GPU_FORCE_64BIT_PTR 0 rx 480 msi 195s
|
|
|
|
ghostfaceuk
|
|
December 03, 2016, 04:05:00 PM |
|
setx GPU_FORCE_64BIT_PTR 0 Bad idea for RX series. From here: GPU_FORCE_64BIT_PTR 0 BHИMAHИE!!!! Пo вoзмoжнocти нe иcпoльзyйтe дaннyю пepeмeннyю ("пaдeниe" пpoгpaммы пpи paбoтe c кapтaми RX cepии)
GPU_FORCE_64BIT_PTR 0 rx 480 msi 195s never had a problem using that myself, using a Sapphire 470 4GB OC
|
|
|
|
|
Xardas2014
|
|
December 03, 2016, 04:51:27 PM |
|
Someone in chat was asking me for this .bat and thought I should post it here also. The .bat simply deletes the log files from Claymore miners. Mining a multi-algo switching pool can generate a TON of them in a day or too. When you want to clear out all the logs, just run the .bat and you won't have to delete all the logs manually. CHANGE THE PATHS TO POINT TO YOUR DIRECTORIES! You can also set this to repeat or run on a schedule, but I'm not going to explain that. :start
cd H:\Users\Me\Downloads\Zcash\Claymore's ZCash AMD GPU Miner v8.0 Beta forfiles /p "H:\Users\Me\Downloads\Zcash\Claymore's ZCash AMD GPU Miner v8.0 Beta" /m *log.txt /c "cmd /c del @path"
cd H:\Users\Me\Downloads\Claymore's Dual Ethereum+Decred_Siacoin_Lbry AMD+NVIDIA GPU Miner v7.4 forfiles /p "H:\Users\Me\Downloads\Claymore's Dual Ethereum+Decred_Siacoin_Lbry AMD+NVIDIA GPU Miner v7.4" /m *log.txt /c "cmd /c del @path"
|
|
|
|
|