mamedesign
Newbie
 Offline
Activity: 78
Merit: 0
|
 |
December 04, 2016, 08:44:54 PM |
|
Leave Claymore the fuck alone!
The more you bitch and pester him about when he's going to release v9 (or any version), the longer he has to spend checking and replying to your bullshit messages, the less time he has to spend developing the new version.
Leave him alone! Just be thankful you have ANY working version that's making you money!
7 fucking posts a you think you have the right to tell members what they can ask you silly twat lol Your lack of courtesy and grammar is disturbing, small man. If you have something to oppose - do it the right way! you have know clue who I am and to make judgement on a post on a forum tells me everything ,there is no problem with my grammar but we all make that odd mistakes no big deal,I asked a question and apparently upset a few people here as you think I don't have the right to ask when next version will be out,Claymore does not need you or anyone els to answer for him and in doing that you show how pathetic you are. You can ask questions, by all means you can, just try not to be so cancerous, that kinda hate spreads and ruins communities. Be nice. Here, have a lolipop.   |
|
|
|
|
|
|
|
Remember that Bitcoin is still beta software. Don't put all of your money into BTC!
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
gaah
Newbie
Offline
Activity: 56
Merit: 0
|
|
December 04, 2016, 08:58:33 PM |
|
The 8.0 miner just stop working for me  when i try to start it again nothing happens anyone with the same problem? |
|
|
|
|
sorry2xs
Legendary
Offline
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
|
|
December 04, 2016, 09:01:16 PM |
|
The 8.0 miner just stop working for me when i try to start it again nothing happens anyone with the same problem? make sure windows didn't quarantine it as a virus |
Please tip the Node 1MPWKB23NsZsXHANnFwVAWT86mL24fqAjF; KO4UX
THAT NO GOOD DO GOODER BAT!!!
|
|
|
gaah
Newbie
Offline
Activity: 56
Merit: 0
|
|
December 04, 2016, 09:05:45 PM |
|
The 8.0 miner just stop working for me when i try to start it again nothing happens anyone with the same problem? make sure windows didn't quarantine it as a virus Well it was AVG was saying it was a trojan the exe file hm guess i have to uninstall it. |
|
|
|
|
|
ghostfaceuk
|
|
December 04, 2016, 09:13:43 PM |
|
The 8.0 miner just stop working for me when i try to start it again nothing happens anyone with the same problem? make sure windows didn't quarantine it as a virus Well it was AVG was saying it was a trojan the exe file hm guess i have to uninstall it. Dont uninstall, just set as an exception in the settings |
|
|
|
|
gaah
Newbie
Offline
Activity: 56
Merit: 0
|
|
December 04, 2016, 09:17:13 PM |
|
The 8.0 miner just stop working for me when i try to start it again nothing happens anyone with the same problem? make sure windows didn't quarantine it as a virus Well it was AVG was saying it was a trojan the exe file hm guess i have to uninstall it. Dont uninstall, just set as an exception in the settings Thx did't know that means alot!  |
|
|
|
|
mettalmag
Legendary
Offline
Activity: 1084
Merit: 1003
≡v≡
|
|
December 04, 2016, 09:26:18 PM |
|
OK here's the strange thing that I can't solve and don't even have a clue what is wrong.
The day V8 was released I was installing new racks (2racks 48GPUs) and configuring them, disabling updates, setting apm on power on in bios and etc. and then I installed V8 (which then I re downloaded again) and started to mine, till this day some of rigs were crashing due to normal "GPU 0 hangs in OpenCL call" I tried every step but nothing helped, then I switched back to V7 and everything works just fine. I also want to mention that all other rigs are working just fine on V8, there are windows 7s and 10s as well, only just 3 or 4 rigs had this kind of problem.
|
|
|
|
|
|
AltcoinScamfinder
|
|
December 04, 2016, 09:57:47 PM |
|
Leave Claymore the fuck alone!
The more you bitch and pester him about when he's going to release v9 (or any version), the longer he has to spend checking and replying to your bullshit messages, the less time he has to spend developing the new version.
Leave him alone! Just be thankful you have ANY working version that's making you money!
you will not tell me if I can ask a question on an open forum you twat!!!unbelievable the people here that feel the need to answer for Claymore he's a big boy and a software developer not a fucking god you moron Unlike you I am no Claymore fan boy I pick the fastest miner at a given time and pay my fee why should I be thankful to Claymore he does not earn my money I do with what I invested and there will always be a source of software for me to use as long as I pay so that gives me the right to ask questions Doesn't mean he's wrong. Is there any reason to think Claymore would answer more because he's asked 10 times? |
FOR RENT.
|
|
|
|
AltcoinScamfinder
|
|
December 04, 2016, 09:58:39 PM |
|
stealth in civilized countries we don't insult people like that for nothing. You are polluting this thread with "whens the new version getting out" and getting aggressive about it. no one wants to read that, its useless. people here talk about hashrates, how to get a good setup, how to troubleshoot problems, general help and of course to discuss the claymore miner, including speculation on the new versions. Please be more respectful. Also, no one has to take shit from a newbie. sorry bud, go whine somewhere else. crypto is risky business, no one said making money is guaranteed.
what a load of crap,I stopped posting here last week and moved over to zcash forum where I can have an adult conversation this place is full of people that think there better than everyone els and can say what they want with out consequences,I take shit from no one never have but I am the most helpful person you can ever meet,I use same name on zcash forum check out my posts,I will not be talked to in that way or told I can't ask a question on an open forum who the hell do you think you are,people like you give this shit hole the bad name it's known for I mean you also come off as sort of a total cunt so thats not exactly gonna help. And as you pointed out, anyone can say anything so whining about "I will not be talked to" in a certain way while insulting people yourself just makes you look like a damn tool. |
FOR RENT.
|
|
|
Yerba
Member
Offline
Activity: 146
Merit: 10
|
|
December 04, 2016, 10:06:38 PM |
|
OK here's the strange thing that I can't solve and don't even have a clue what is wrong.
The day V8 was released I was installing new racks (2racks 48GPUs) and configuring them, disabling updates, setting apm on power on in bios and etc. and then I installed V8 (which then I re downloaded again) and started to mine, till this day some of rigs were crashing due to normal "GPU 0 hangs in OpenCL call" I tried every step but nothing helped, then I switched back to V7 and everything works just fine. I also want to mention that all other rigs are working just fine on V8, there are windows 7s and 10s as well, only just 3 or 4 rigs had this kind of problem.
Same here. Few cards will hang with v8 but work without problems with v7. I guess there is correlation between power consumption and hashrates. V8 consumes more power and gives more hashrate. So after raising voltage for downvolted cards everything works well now. |
|
|
|
|
mettalmag
Legendary
Offline
Activity: 1084
Merit: 1003
≡v≡
|
|
December 04, 2016, 10:15:53 PM |
|
OK here's the strange thing that I can't solve and don't even have a clue what is wrong.
The day V8 was released I was installing new racks (2racks 48GPUs) and configuring them, disabling updates, setting apm on power on in bios and etc. and then I installed V8 (which then I re downloaded again) and started to mine, till this day some of rigs were crashing due to normal "GPU 0 hangs in OpenCL call" I tried every step but nothing helped, then I switched back to V7 and everything works just fine. I also want to mention that all other rigs are working just fine on V8, there are windows 7s and 10s as well, only just 3 or 4 rigs had this kind of problem.
Same here. Few cards will hang with v8 but work without problems with v7. I guess there is correlation between power consumption and hashrates. V8 consumes more power and gives more hashrate. So after raising voltage for downvolted cards everything works well now. I was mining on stock bios RX 480 8G then I replaced those cards to low volt bios for eth on RX 480 8G but it didn't work either, next time I get on place only option left is to try another PSU or reinstall the windows.. |
|
|
|
|
|
delle54
|
|
December 04, 2016, 10:25:19 PM |
|
It could be a riser problem, since there is more data being transfered at a faster rate.
|
|
|
|
|
mettalmag
Legendary
Offline
Activity: 1084
Merit: 1003
≡v≡
|
|
December 04, 2016, 10:27:03 PM |
|
It could be a riser problem, since there is more data being transfered at a faster rate.
in two days I will get my new risers and will check that also |
|
|
|
|
Yerba
Member
Offline
Activity: 146
Merit: 10
|
|
December 04, 2016, 10:33:43 PM |
|
It could be a riser problem, since there is more data being transfered at a faster rate.
Makes sense. Just my question remains - how raising voltage gets rid of this error? |
|
|
|
|
mettalmag
Legendary
Offline
Activity: 1084
Merit: 1003
≡v≡
|
|
December 04, 2016, 10:35:47 PM |
|
It could be a riser problem, since there is more data being transfered at a faster rate.
Makes sense. Just my question remains - how raising voltage gets rid of this error? Im also wondering if it is a riser problem why miner crashes after 5+hrs of work ? |
|
|
|
|
|
TechPark
|
|
December 04, 2016, 10:51:22 PM |
|
i am facing this problem http://i64.tinypic.com/j9pw02.jpgcheck out GPU1 H/S i tried fresh install drivers with DDU, and tried with diffrent cards also same problem. my 1 gpu always give me bad hashrate also check afterburner ss. and i also tried diffrent pool. but same problem. even i tried with GA-970A-DS3P motherboard and i tried with 5 rx 470 cards also and tried 15.12 drivers too my config MB= gigabyte GA-990FXA-UD3 R5 RAM= 8GB VIRTUAL MEMORY = 16GB PROCESSOR= AMD FX6300 1200WATT PSU Just put screen on card running slow and put it back on preferred card when card is running properly!  i m not understand u bro. pls explain more This usually happens when pc reboot and miner restarts. I remove HDMI cable from the usual card and insert it into card that's hashing low, hashes will start to climb on card and than I put HDMI back on coolest card. I used to uninstall driver, but that's a waste of time. If I were you I would do a series of tests to find a culprit by method of exclusion. 1. Can you do 4 tests: disconnect 1 card and run 4 other cards in a combination where you can exclude every card. If you are getting full speed on every card then it means that the cards are fine. 2. Do the same for all risers. Exclude 1, run 4. If you are getting full speed on every riser then it means that the cards are fine. 3. If tests 1 and 2 successful you need to try another PSU with more amps on 12V line. Or run that card from another separate PSU. |
|
|
|
|
matmator
Sr. Member
Offline
Activity: 487
Merit: 252
bou !
|
|
December 04, 2016, 10:51:56 PM |
|
Here I come to try to undermine the zcash with claymore
But I crash after a few seconds
I get 180H / S per card, (rx 480)
This is what I put in the bat:
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool zec-eu1.nanopool.org:6666 -allpools 1 -zwal my address wallet.rig -zpsw x
Do you have an idea why this crash?
thank you in advance
|
go to the moon !!
|
|
|
HerrDirektor
Member
Offline
Activity: 70
Merit: 10
|
|
December 04, 2016, 10:59:24 PM |
|
Here I come to try to undermine the zcash with claymore
But I crash after a few seconds
I get 180H / S per card, (rx 480)
This is what I put in the bat:
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool zec-eu1.nanopool.org:6666 -allpools 1 -zwal my address wallet.rig -zpsw x
Do you have an idea why this crash?
thank you in advance
Try remove string "GPU_FORCE_64BIT_PTR 0" and reboot PC. |
|
|
|
|
Assaro
Member
Offline
Activity: 114
Merit: 10
|
|
December 04, 2016, 11:22:38 PM |
|
guys have some questions that bothers me...
just added in my rig today an HD 8990, to another 3x R9 390 gigabite 8 gb, with a Ewga supernova 1300w G2 PSU... The consuption is 1327w at wall...
Also have an Therma Take Though power 1200w PSU which is running at 1130w at wall....
where is the limit of the PSU consuption in long term? Any experience/advice?
Just dont wanna burn them in short time...
next, where is the difference between the MSI afterburner setting and setting the settings in the crimson software? for me are the setting possibilities same, or i missing something?
pls teach me...
Many thanks for any advice and help....
|
|
|
|
|
matmator
Sr. Member
Offline
Activity: 487
Merit: 252
bou !
|
|
December 04, 2016, 11:27:22 PM |
|
Here I come to try to undermine the zcash with claymore
But I crash after a few seconds
I get 180H / S per card, (rx 480)
This is what I put in the bat:
GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool zec-eu1.nanopool.org:6666 -allpools 1 -zwal my address wallet.rig -zpsw x
Do you have an idea why this crash?
thank you in advance
Try remove string "GPU_FORCE_64BIT_PTR 0" and reboot PC. Ok I will try. thxp |
go to the moon !!
|
|
|
|
