toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
 |
December 07, 2016, 03:51:37 PM |
|
v9.0 -i 8
2x480 8 gb
Gpu clock: 1400, voltage: 1100 Memory clock: 2030, voltage: 1000
Gpu1: 240 h/s, gpu2: 220h/s
390w from wall
390w from wall for both ? wait for the new AMD drives that release tomorrow you may see a drop in Power usages and heat , probable no speeds increase. just because the leaked info says in games doesn't mean in games . remember it's leaked info and the tester are still under NDA .
|
|
|
|
ghostfaceuk
|
 |
December 07, 2016, 03:52:24 PM |
|
I'm guessing the R9280 not the X version are maxed out, CM 9 didn't do any thing for it speed wise, time to edit the bios, i guess to see if that does any thing.
it DID improve my R7370 by 10 or so Sol . they were doing 131 to 134 sol tops now they do 143 sol or more with CM 9 haven't tried my RX 400 series cards, yet .
Nm didn't wait long enough for the R9280 not x version it does 215 Sols up from 209. not much more but it's still more, it looks like it may be reaching it's max limits at stock setting .
What settings are you using for your 280, I'm on full stock bios and clocks and getting 188h/s?
|
|
|
|
mfsmarques
Member

Offline
Activity: 65
Merit: 10
|
 |
December 07, 2016, 03:53:48 PM |
|
RX 470 - 202 H/s - 1250/1750 RX 480 - 242 H/s - 1350/2200 R9 390x - 309 H/s - 1100/1500
|
|
|
|
shadabahmed
|
 |
December 07, 2016, 03:54:38 PM |
|
v8 was working fine for me in v9 system hangs. i have to reboot system manully
|
Am I spamming? Report me!
|
|
|
Qazo
|
 |
December 07, 2016, 03:59:59 PM |
|
v9.0 -i 8
2x480 8 gb
Gpu clock: 1400, voltage: 1100 Memory clock: 2030, voltage: 1000
Gpu1: 240 h/s, gpu2: 220h/s
390w from wall
390w from wall for both ? wait for the new AMD drives that release tomorrow you may see a drop in Power usages and heat , probable no speeds increase. just because the leaked info says in games doesn't mean in games . remember it's leaked info and the tester are still under NDA . yes from both
|
|
|
|
IOTUSA
|
 |
December 07, 2016, 04:00:16 PM |
|
ZEC: Stratum - connecting to 'equihash.usa.nicehash.com' <198.11.195.136> port 3357 (unsecure) ZEC: Stratum - Connected (equihash.usa.nicehash.com:3357) (unsecure) This (unsecure) message is new with V9 anyone else seeing this? Claymore, THANKS for the new Miner  This is because Claymore added TLS/SSL support. Nothing has changed form the old one, the new version just lets you know that the connection isn't 'secure' (the older wasn't either) but gives you secure connection option when available from pool.
|
|
|
|
juhasz1109
Newbie
Offline
Activity: 47
Merit: 0
|
 |
December 07, 2016, 04:01:06 PM |
|
claymore v9
R7 370 4GB GPU:1175 MEM:1475 147 H/s
|
|
|
|
Puffy23
Member

Offline
Activity: 108
Merit: 11
|
 |
December 07, 2016, 04:02:02 PM |
|
I'm running bone stock Sapphire Nitro R9 Furys (4GB) v8 - 285 sol/s v9 - 330 sol/s
~15.5% increase. Keep up the great work!
|
|
|
|
arielbit
Legendary
Offline
Activity: 3444
Merit: 1061
|
 |
December 07, 2016, 04:02:23 PM |
|
v9 -i 8 280x ~225 h/s 1110, 1500 390 ~304 h/s 1130, 1500 290x ~286 h/s 1100, 1500 480 ~245 h/s 1380, 2200 fury ~330 h/s 1065, 550 time to sleep 
|
|
|
|
dakky
Newbie
Offline
Activity: 53
Merit: 0
|
 |
December 07, 2016, 04:02:31 PM |
|
v8 R9 280X - 203 R9 290 - 220
v9 R9 280X - 222 R9 290 - 231
Both on stock.
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
 |
December 07, 2016, 04:02:43 PM |
|
I'm guessing the R9280 not the X version are maxed out, CM 9 didn't do any thing for it speed wise, time to edit the bios, i guess to see if that does any thing.
it DID improve my R7370 by 10 or so Sol . they were doing 131 to 134 sol tops now they do 143 sol or more with CM 9 haven't tried my RX 400 series cards, yet .
Nm didn't wait long enough for the R9280 not x version it does 215 Sols up from 209. not much more but it's still more, it looks like it may be reaching it's max limits at stock setting .
What settings are you using for your 280, I'm on full stock bios and clocks and getting 188h/s? I meant by stock settings The bios is stock, I use afterburner and have boost turned off and set the clock and memory to:.  Mines watered cooled the temps never go over 50c for the GPU and the vram form time to time may go little higher but not over 55 c. CM 9 ZEC: 12/07/16-11:01:11 - New job from us1-zcash.flypool.org:3333 ZEC - Total Speed: 214.752 H/s, Total Shares: 201, Rejected: 0, Time: 00:33 ZEC: GPU0 214.752 H/s ZEC: 12/07/16-11:01:17 - New job from us1-zcash.flypool.org:3333 ZEC - Total Speed: 214.632 H/s, Total Shares: 201, Rejected: 0, Time: 00:33 ZEC: GPU0 214.632 H/s GPU0 t=48C fan=60% ZEC: 12/07/16-11:01:27 - SHARE FOUND - (GPU 0) ZEC: Share accepted (32 ms)! ZEC: 12/07/16-11:01:42 - New job from us1-zcash.flypool.org:3333 ZEC - Total Speed: 214.665 H/s, Total Shares: 202, Rejected: 0, Time: 00:33 ZEC: GPU0 214.665 H/s ZEC: 12/07/16-11:01:45 - SHARE FOUND - (GPU 0) ZEC: Share accepted (31 ms)!
|
|
|
|
Jinx99
Member

Offline
Activity: 91
Merit: 10
|
 |
December 07, 2016, 04:07:27 PM |
|
Any results on Claymore V9 and 380X ?
|
|
|
|
greaterninja
|
 |
December 07, 2016, 04:08:39 PM |
|
Originally, I was quite skeptical of Claymore and I apologize in regards to that suspicion.
Claymore, thank you for everything you have done for us sir.
The miner and work is impressive!
|
|
|
|
rpg
|
 |
December 07, 2016, 04:10:54 PM |
|
7950 from 180 to 193 Rx480 from 205 to 240
Edit: make it 246 on the rx480 @ 1395/2195
|
|
|
|
flekkelek
|
 |
December 07, 2016, 04:12:12 PM |
|
Any results on Claymore V9 and 380X ?
Posted earlier: 173-176H/s with -i 8 and 1150/1500
|
|
|
|
ghostfaceuk
|
 |
December 07, 2016, 04:13:23 PM |
|
I'm guessing the R9280 not the X version are maxed out, CM 9 didn't do any thing for it speed wise, time to edit the bios, i guess to see if that does any thing.
it DID improve my R7370 by 10 or so Sol . they were doing 131 to 134 sol tops now they do 143 sol or more with CM 9 haven't tried my RX 400 series cards, yet .
Nm didn't wait long enough for the R9280 not x version it does 215 Sols up from 209. not much more but it's still more, it looks like it may be reaching it's max limits at stock setting .
What settings are you using for your 280, I'm on full stock bios and clocks and getting 188h/s? I meant by stock settings The bios is stock, I use afterburner and have boost turned off and set the clock and memory to:.  Mines watered cooled the temps never go over 50c for the GPU and the vram form time to time may go little higher but not over 55 c. CM 9 ZEC: 12/07/16-11:01:11 - New job from us1-zcash.flypool.org:3333 ZEC - Total Speed: 214.752 H/s, Total Shares: 201, Rejected: 0, Time: 00:33 ZEC: GPU0 214.752 H/s ZEC: 12/07/16-11:01:17 - New job from us1-zcash.flypool.org:3333 ZEC - Total Speed: 214.632 H/s, Total Shares: 201, Rejected: 0, Time: 00:33 ZEC: GPU0 214.632 H/s GPU0 t=48C fan=60% ZEC: 12/07/16-11:01:27 - SHARE FOUND - (GPU 0) ZEC: Share accepted (32 ms)! ZEC: 12/07/16-11:01:42 - New job from us1-zcash.flypool.org:3333 ZEC - Total Speed: 214.665 H/s, Total Shares: 202, Rejected: 0, Time: 00:33 ZEC: GPU0 214.665 H/s ZEC: 12/07/16-11:01:45 - SHARE FOUND - (GPU 0) ZEC: Share accepted (31 ms)! Thankyou for sharing that sharing that top, my card has the stock fans but I guess overclocking the GPU to 1100 should help a little
|
|
|
|
|
supersonic
|
 |
December 07, 2016, 04:19:40 PM |
|
 all cards i6 stock clocks, changed timings on all exept 390X
|
Nice from far but far from nice
|
|
|
devlin
|
 |
December 07, 2016, 04:20:27 PM |
|
Nice speed improvement! Let's see price evolution.
|
|
|
|
CoolnQuiet
Sr. Member
  
Offline
Activity: 388
Merit: 288
Living the dream
|
 |
December 07, 2016, 04:20:35 PM |
|
RX 480 (ASUS Strix 8 GB) getting 230 h/s (200 h/s on v8) on v9, and power usage is the same as before on v8.
Thank you clay. Good job as always.
|
|
|
|
|