Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[mistercashking]

Currently I'm working on improvements for Polaris cards mainly, you will see good speedup in next version, I will release it in a few days.

some polaris love, nice thanks claymore.

[shadabahmed]

Something wrong with dwarfpool. Last 4-5 days the payments are very low and the admin don't want to give us an explication. I send it 2 mail without an answer. I guess i will change my rigs to another pool. Any recomandation? (without flypool, another tief)  

Coinotron opened a zec pool recently but he was a bit late and it is still very low on hashrate. I always recommend his pool because the guy has been here for years and is one of the honest and decent pool operators. It's worth it giving his pool a chance.

his site name plz

[shadabahmed]

dwarfpool is offline

[Lucky - Luciano]

390 the new version will catch up in speed 1070?

May be  :

[fittsy]

When someone comes up with a PoS stake coin that offers a return in the ballpark of PoW mining, then folks might get interested.

 So far, every PoS coin I've seen offered WORSE returns than some high-dividend STOCKS do and a few of them offer worse returns than some BANK ACCOUNTS offer - with no risk of major devaluation of the underlying "currency" more than wiping out the "return" often by a 10:1 ratio or worse.

 Is there such a thing as a PoS coin that offers more than 2.5% return PER YEAR?

or they were scamcoins (XPY)

[rpg]

Question. I'm running win7 home premium on a mobo with 2 x1 and 2 x16 slots. with 2 gpus either on the x1 or x16 works fine, but once i put the third it only recognizes the x16 gpus. Is there a gpu limit on the home premium? Does win7 pro have this problem or is this a mobo issue? tia

[Ursul0]

Question. I'm running win7 home premium on a mobo with 2 x1 and 2 x16 slots. with 2 gpus either on the x1 or x16 works fine, but once i put the third it only recognizes the x16 gpus. Is there a gpu limit on the home premium? Does win7 pro have this problem or is this a mobo issue? tia

check bios

[rpg]

Question. I'm running win7 home premium on a mobo with 2 x1 and 2 x16 slots. with 2 gpus either on the x1 or x16 works fine, but once i put the third it only recognizes the x16 gpus. Is there a gpu limit on the home premium? Does win7 pro have this problem or is this a mobo issue? tia

check bios

i did. nothing on the bios

[FFI2013]

Does anyone know what you should set difficulty at per hashrate suprnova let's you set it and I wanted to try it maybe it might help with my hashrate bouncing all over thanks

[Mitja1998]

Question. I'm running win7 home premium on a mobo with 2 x1 and 2 x16 slots. with 2 gpus either on the x1 or x16 works fine, but once i put the third it only recognizes the x16 gpus. Is there a gpu limit on the home premium? Does win7 pro have this problem or is this a mobo issue? tia

check bios

i did. nothing on the bios

What motherbord do you have? I have one asus p5k deluxe and it did the same. I had one gpu in x16 and one in x1 but when I connected third gpu in x4 slot, x1 slot didnt work. I checked manual and it said that if I connect gpu in x4 slot, x1 slot doesn't work anymore.

[Mitja1998]

Currently I'm working on improvements for Polaris cards mainly, you will see good speedup in next version, I will release it in a few days.

some polaris love, nice thanks claymore.

Is there still room for improvement in tahiti cards or is this the limit?

[BenCodie]

okay so we can use Nvidia cards aswell right?
Now my question is can i use nvidia cards on windows with claymore's zcash miner or should i use different miner
Are Nvidia cards are more stable than AMDs ?
How about temperature and Power consumption ?
Which model is best for good hashes but remains in budget (not over priced)
How much hashes these models can get
gtx 760
gtx 970 EXOC?
gtx970 G1
gtx 980 ti ?
Msi gtx 970
Gigabyte Gtx 1050Ti 4GB
gtx 1060 ?
msi gtx 1060 6gb twin frozer
Asus strix Gtx 950 Direct CU II
Gtx 1060 zotac 6gb
Asus Dual Geforce Gtx 1070 8 Gb

please suggest what is best for getting high hashes from above mentioned models or if there is something else please mention here.

Whats minimum GB and Bits card can i use for test i mean which is lowest model should i use? gtx 550ti,650ti

Thanks in Advance

[rpg]

Question. I'm running win7 home premium on a mobo with 2 x1 and 2 x16 slots. with 2 gpus either on the x1 or x16 works fine, but once i put the third it only recognizes the x16 gpus. Is there a gpu limit on the home premium? Does win7 pro have this problem or is this a mobo issue? tia

check bios

i did. nothing on the bios

What motherbord do you have? I have one asus p5k deluxe and it did the same. I had one gpu in x16 and one in x1 but when I connected third gpu in x4 slot, x1 slot didnt work. I checked manual and it said that if I connect gpu in x4 slot, x1 slot doesn't work anymore.

an old msi7638. i was afraid of that, didnt want to upgrade now and dont have an extra x1 extender. I have a key somewhere for win7 pro, may try it, just in case

by the way, micro center has corsair gold 850 refurbished for $80

EDIT: just confirmed on the MSI site that if slot 4 is used 2 and 3 become unavailable

[cracker666]

any one got any stats for R9 380 would be greatfull

[bitoc2015]

390 the new version will catch up in speed 1070?

May be  :

What miner you use?

[klondike_bar]

any one got any stats for R9 380 would be greatfull

270x does ~150 with a bit of underclocking applied.

280/380 should be in the 200-240 range depending on power limit

[klondike_bar]

390 the new version will catch up in speed 1070?

May be  :

What miner you use?

damn, nice hashrate. my 1070 cards run about 380H/s on the eqm 1.0.3 miner (1.0.4 promises a small bump). Thats at 65% powerlimit though, so i suppose 420 at 100% and 465 at 122% is possible. however, better to cut down power use by 40% in exchange for only ~20% of the hashrate

[BenCodie]

One of my 290's Rig starting to hang after every 2 to 3 hours approx
here is what i get

12:07:10:633   cf0   ZEC: Stratum - Failed to connect, retry in 20 sec...
12:07:13:258   f8c   Got incorrect temperature 511, ignore
12:07:16:305   f8c   Got incorrect temperature 511, ignore
12:07:19:414   f8c   Got incorrect temperature 511, ignore
12:07:19:649   f8c   Got incorrect temperature 511, ignore
12:07:19:836   f8c   GPU0 t=46C fan=70%, GPU1 t=45C fan=70%, GPU2 t=0C fan=0%, GPU3 t=47C fan=0%
12:07:19:852   f8c   em hbt: 9297, fm hbt: 79,
12:07:19:867   f8c   watchdog - thread 0, hb time 47
12:07:19:867   f8c   watchdog - thread 1, hb time 94
12:07:19:914   f8c   watchdog - thread 2, hb time -31
12:07:19:914   f8c   watchdog - thread 3, hb time 31
12:07:19:930   f8c   watchdog - thread 4, hb time 47
12:07:19:945   f8c   watchdog - thread 5, hb time 0
12:07:19:977   f8c   watchdog - thread 6, hb time 0
12:07:19:992   f8c   watchdog - thread 7, hb time -63
12:07:20:008   f8c   watchdog - thread 8, hb time -110
12:07:20:024   f8c   watchdog - thread 9, hb time -141
12:07:20:055   f8c   watchdog - thread 10, hb time -188
12:07:20:070   f8c   watchdog - thread 11, hb time -188
12:07:20:086   f8c   watchdog - thread 12, hb time 79547
12:07:20:102   f8c   WATCHDOG: GPU 3 hangs in OpenCL call, exit
12:07:20:117   f8c   watchdog - thread 13, hb time 79719
12:07:20:133   f8c   WATCHDOG: GPU 3 hangs in OpenCL call, exit
12:07:20:133   f8c   watchdog - thread 14, hb time 79609
12:07:20:133   f8c   WATCHDOG: GPU 3 hangs in OpenCL call, exit
12:07:20:149   f8c   watchdog - thread 15, hb time 79672
12:07:20:164   f8c   WATCHDOG: GPU 3 hangs in OpenCL call, exit
12:07:20:305   f8c   Got incorrect temperature 511, ignore
12:07:21:516   f8c   Restarting OK, exit...

driver 16.9.2  CM v9.3


Any suggestion please

[m1n1ngP4d4w4n]

damn, nice hashrate. my 1070 cards run about 380H/s on the eqm 1.0.3 miner (1.0.4 promises a small bump). Thats at 65% powerlimit though, so i suppose 420 at 100% and 465 at 122% is possible. however, better to cut down power use by 40% in exchange for only ~20% of the hashrate

You should upgrade your miner, there was like 4 new version since 1.0.3 (about 10% more speed at least since), i do 420h/s with 1.0.4c @60% tdp.

[Golku]

One of my 290's Rig starting to hang after every 2 to 3 hours approx
here is what i get

12:07:10:633   cf0   ZEC: Stratum - Failed to connect, retry in 20 sec...
12:07:13:258   f8c   Got incorrect temperature 511, ignore
12:07:16:305   f8c   Got incorrect temperature 511, ignore
12:07:19:414   f8c   Got incorrect temperature 511, ignore
12:07:19:649   f8c   Got incorrect temperature 511, ignore
12:07:19:836   f8c   GPU0 t=46C fan=70%, GPU1 t=45C fan=70%, GPU2 t=0C fan=0%, GPU3 t=47C fan=0%
12:07:19:852   f8c   em hbt: 9297, fm hbt: 79,
12:07:19:867   f8c   watchdog - thread 0, hb time 47
12:07:19:867   f8c   watchdog - thread 1, hb time 94
12:07:19:914   f8c   watchdog - thread 2, hb time -31
12:07:19:914   f8c   watchdog - thread 3, hb time 31
12:07:19:930   f8c   watchdog - thread 4, hb time 47
12:07:19:945   f8c   watchdog - thread 5, hb time 0
12:07:19:977   f8c   watchdog - thread 6, hb time 0
12:07:19:992   f8c   watchdog - thread 7, hb time -63
12:07:20:008   f8c   watchdog - thread 8, hb time -110
12:07:20:024   f8c   watchdog - thread 9, hb time -141
12:07:20:055   f8c   watchdog - thread 10, hb time -188
12:07:20:070   f8c   watchdog - thread 11, hb time -188
12:07:20:086   f8c   watchdog - thread 12, hb time 79547
12:07:20:102   f8c   WATCHDOG: GPU 3 hangs in OpenCL call, exit
12:07:20:117   f8c   watchdog - thread 13, hb time 79719
12:07:20:133   f8c   WATCHDOG: GPU 3 hangs in OpenCL call, exit
12:07:20:133   f8c   watchdog - thread 14, hb time 79609
12:07:20:133   f8c   WATCHDOG: GPU 3 hangs in OpenCL call, exit
12:07:20:149   f8c   watchdog - thread 15, hb time 79672
12:07:20:164   f8c   WATCHDOG: GPU 3 hangs in OpenCL call, exit
12:07:20:305   f8c   Got incorrect temperature 511, ignore
12:07:21:516   f8c   Restarting OK, exit...

driver 16.9.2  CM v9.3


Any suggestion please

Same problem i would get this error in 4 hours
I swapped the gpu with a other slot and it works now a bit better 23-25 hours