Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[booz]

Ubuntu 16.04
amd-pro 16.40
7x R9-290X

Code:

[ 2194.912108] amdgpu 0000:07:00.0: IH ring buffer overflow (0x000021F0, 0x000021F0, 0x00002200)
[ 2305.861640] amdgpu 0000:06:00.0: IH ring buffer overflow (0x0000B060, 0x0000B060, 0x0000B070)
[ 7768.133750] amdgpu 0000:08:00.0: GPU fault detected: 146 0x0388440c
[ 7768.133947] amdgpu 0000:08:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x0016289C
[ 7768.134180] amdgpu 0000:08:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0814400C
[ 7768.134411] VM fault (0x0c, vmid 4) at page 1452188, read from 'TC1' (0x54433100) (324)
[ 8462.366154] amdgpu 0000:06:00.0: GPU fault detected: 146 0x034e440c
[ 8462.366349] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x0015299A
[ 8462.366579] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0E04400C
[ 8462.366810] VM fault (0x0c, vmid 7) at page 1386906, read from 'TC1' (0x54433100) (68)
[ 8462.427870] amdgpu 0000:06:00.0: GPU fault detected: 146 0x0344440c
[ 8462.428065] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x0015299A
[ 8462.428295] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0414400C
[ 8462.428526] VM fault (0x0c, vmid 2) at page 1386906, read from 'TC1' (0x54433100) (324)
[ 8462.428532] amdgpu 0000:06:00.0: GPU fault detected: 146 0x0344080c
[ 8462.428723] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x0015299A
[ 8462.428953] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0408400C
[ 8462.429183] VM fault (0x0c, vmid 2) at page 1386906, read from 'TC5' (0x54433500) (132)
[ 9079.228076] amdgpu 0000:07:00.0: GPU fault detected: 146 0x034c440c
[ 9079.228272] amdgpu 0000:07:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x0015299A
[ 9079.228502] amdgpu 0000:07:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C14400C
[ 9079.228732] VM fault (0x0c, vmid 6) at page 1386906, read from 'TC1' (0x54433100) (324)
[11544.492617] amdgpu 0000:02:00.0: GPU fault detected: 146 0x034c440c
[11544.492813] amdgpu 0000:02:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x0015299A
[11544.493042] amdgpu 0000:02:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C14400C
[11544.493273] VM fault (0x0c, vmid 6) at page 1386906, read from 'TC1' (0x54433100) (324)
[11544.861240] perf interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[42403.116988] amdgpu 0000:06:00.0: GPU fault detected: 146 0x00047624
[42403.117182] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x00100000
[42403.117412] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04076024
[42403.117642] VM fault (0x24, vmid 2) at page 1048576, read from 'CPF' (0x43504600) (118)
root@S2-P1:~/claymore_zec# dmesg -c
[ 2194.912108] amdgpu 0000:07:00.0: IH ring buffer overflow (0x000021F0, 0x000021F0, 0x00002200)
[ 2305.861640] amdgpu 0000:06:00.0: IH ring buffer overflow (0x0000B060, 0x0000B060, 0x0000B070)
[ 7768.133750] amdgpu 0000:08:00.0: GPU fault detected: 146 0x0388440c
[ 7768.133947] amdgpu 0000:08:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x0016289C
[ 7768.134180] amdgpu 0000:08:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0814400C
[ 7768.134411] VM fault (0x0c, vmid 4) at page 1452188, read from 'TC1' (0x54433100) (324)
[ 8462.366154] amdgpu 0000:06:00.0: GPU fault detected: 146 0x034e440c
[ 8462.366349] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x0015299A
[ 8462.366579] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0E04400C
[ 8462.366810] VM fault (0x0c, vmid 7) at page 1386906, read from 'TC1' (0x54433100) (68)
[ 8462.427870] amdgpu 0000:06:00.0: GPU fault detected: 146 0x0344440c
[ 8462.428065] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x0015299A
[ 8462.428295] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0414400C
[ 8462.428526] VM fault (0x0c, vmid 2) at page 1386906, read from 'TC1' (0x54433100) (324)
[ 8462.428532] amdgpu 0000:06:00.0: GPU fault detected: 146 0x0344080c
[ 8462.428723] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x0015299A
[ 8462.428953] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0408400C
[ 8462.429183] VM fault (0x0c, vmid 2) at page 1386906, read from 'TC5' (0x54433500) (132)
[ 9079.228076] amdgpu 0000:07:00.0: GPU fault detected: 146 0x034c440c
[ 9079.228272] amdgpu 0000:07:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x0015299A
[ 9079.228502] amdgpu 0000:07:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C14400C
[ 9079.228732] VM fault (0x0c, vmid 6) at page 1386906, read from 'TC1' (0x54433100) (324)
[11544.492617] amdgpu 0000:02:00.0: GPU fault detected: 146 0x034c440c
[11544.492813] amdgpu 0000:02:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x0015299A
[11544.493042] amdgpu 0000:02:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0C14400C
[11544.493273] VM fault (0x0c, vmid 6) at page 1386906, read from 'TC1' (0x54433100) (324)
[11544.861240] perf interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[42403.116988] amdgpu 0000:06:00.0: GPU fault detected: 146 0x00047624
[42403.117182] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x00100000
[42403.117412] amdgpu 0000:06:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x04076024
[42403.117642] VM fault (0x24, vmid 2) at page 1048576, read from 'CPF' (0x43504600) (118)

Put cards in PCI-E 4-16X slots. Don't touch 1X.

[safonov]

r9 280x-245h/s.  Tell me. BIOS for mining r9 280x powercolor

[BenCodie]

Ok, I know I'm a few days late but I finally have the numbers for the Sapphire Fury Nitros I promised last Thursday/Friday.  I was dragging my feet after Claymore hinted that v11.1 would include compatibility for asm with the 16.11.3 driver set.  I busied myself tweaking my eco rom for 16.11.3 which appears to have been wasted effort.  The implication being that I am unsatisfied with the performance of the "eco" rom, but will post the data with the caveat that I strongly believe there is room for improvement (and will work on further tweaks this week).

Disclaimer: This rig has several components that are overkill.  I have plenty of 'computer crap' collecting dust so I don't hesitate to grab things that work.  I guess I'm pleading that I don't have to waste time responding to posts about how i5s are stupid and/or PSU density is a waste of money.



CPU: i5 4570
MB: ASRock H81 Pro BTC R2.0
RAM: 8GB G.Skill Ripjaws X series DDR3 1600 Mhz
PSU: EVGA 1600 G2 (PSU1) & EVGA 1300 G2 (PSU2)
HDD: 128GB SSD with 20GB virtual memory
OS: Windows 10 Pro
GPU: x6 Sapphire R9 Fury Nitro 100379NTOC+SR
Risers: x5 Version 6 USB 3.0 PCIE Riser 1x to 16x
Riser: x1 Shielded 16x Riser Ribbon
Driver: Radeon Software Version: 15.12
Cooling: x4 Noctua NF-F12 IPPC 3000 (blowing on cards)
Cooling: x2 Corsair SP120 High Performance Edition (blowing on MB)

Configuration:
PSU1 - 3 Cards, 2 Risers, MB (including ribbon riser for the 3rd card), CPU, HDD, Fans
PSU2 - 3 Cards, 3 Risers

Required Info: The kilowatt meter on the left is PSU1.  The kilowatt meter on the right is PSU2.  Each GPU was delivered to the door for $271.81/GPU.

RESULTS

Bone Stock
1050/500



Hashrate: 2,503 H/s
Power: 1,657 W at the wall.

Analysis: Each card is drawing 271.33 W from the wall and producing 417.16 H/s.  The system is drawing a measly 30 W (the Noctuas are basically just idling).

H/W = 1.54
H/$ = 1.53


"Eco" Rom Installed
900/400 with -171mV & 50% PL



Hashrate: 2,025 H/s
Power: 885 W at the wall.

Analysis: Each card is drawing 142 W from the wall and producing 337.5 H/s.  The system is drawing 33 W.

H/W = 2.38
H/$ = 1.24

Summary: The goal is to crank the wattage down to 100 W at the PSU resulting in ~110 W at the wall.  To accomplish this I need to shave another 30 W per card, which appears doable.  The sticker is that I would like to keep it at or above 1,800 H/s in pursuit of a H/W ratio of 3.  If anyone has a Fury rom they wouldn't mind sharing I would be greatly appreciative.  Likewise, I am willing to share what I've been working on (more work to come).

[kinsik]

For me v11.1 started making a lot of invalid shares for 0 card which is Rx480 8g.
I use 16.10.3 drivers and in new version it is recommended to use 16.12.2. Will have to check whether drivers upgrade gonna resolve this issue.

[chohav]

Nice

R9 280X finally broke the 300 H/S barrier with 11.1


Great WORK!!!

Hi adaseb, could please share what settings are you using for getting such high hash. I am only getting 250-260 on my 280x.
Thanks

[espressodelisi]

v11.1:

- improved speed, about 365H/s on stock 390X, 385H/s on stock Nano, 260H/s on stock 280X, 260H/s on stock RX480.
- improved compatibility.
- some bug fixes and minor improvements.

NOTES:
1. It seems there is no way to get full speed on latest drivers for Fiji and Polaris cards, at least in Windows. So don't use latest drivers for Fury, use 15.12 or 16.3.2. Since old drivers don't support Polaris, there is no way to get full speed for these cards at all, at least in Windows.
2. Tonga - currently I cannot get enough speedup from assembler for this card so I did not include assembler kernel for this card.

Still no linux build?

[Gaglam]

And maybe you could share how much power (watt) it needs with v11.1?
Regards

Nice

R9 280X finally broke the 300 H/S barrier with 11.1


Great WORK!!!

Hi adaseb, could please share what settings are you using for getting such high hash. I am only getting 250-260 on my 280x.
Thanks

[fidelbitcoin]

I have 2 x RX 480 cards (1 MSI Gaming 8GB and 1 Sapphire OC+ 8GB). With Claymore 11 Beta, it run all long day without problem. I just tried Claymore 11.1 Beta with the same settings, the performance is slightly better but it only run 2-3 hours then auto restart.
Could you please give me a hint to keep it running for long time? Thank you.

[adaseb]

Nice

R9 280X finally broke the 300 H/S barrier with 11.1


Great WORK!!!

Hi adaseb, could please share what settings are you using for getting such high hash. I am only getting 250-260 on my 280x.
Thanks

Stock settings, bios memory straps are tweaked. Hynix memory type.

And maybe you could share how much power (watt) it needs with v11.1?
Regards

Nice

R9 280X finally broke the 300 H/S barrier with 11.1


Great WORK!!!

Hi adaseb, could please share what settings are you using for getting such high hash. I am only getting 250-260 on my 280x.
Thanks

I'm too lazy to turn off the rig and plug in the KillAWatt meter since there is a new version almost every week. Either way it uses alot of power. I think with version 8.0 or 9.0 it used 1 H/S = 1 Watt. The GPUs were also slightly undervolted.

Pretty sure its much higher now.

[YIz]

I'm only getting about 270H/s on a 290, is that unusual?

[KrokoTill]

11.0 -> 11.1
280 1000/1500 250 -> 260
290 1050/1250 330 -> 360

370 1150/1500 169 -> 177

[kirilvvbg]

11.0 --> 11.1
6x RX470/8 = 1470 --> 1510
i.e. 6-7 sols per card = ~+2.5%

[oslak]

Nice

R9 280X finally broke the 300 H/S barrier with 11.1


Great WORK!!!

Hi adaseb, could please share what settings are you using for getting such high hash. I am only getting 250-260 on my 280x.
Thanks

Stock settings, bios memory straps are tweaked. Hynix memory type.

And maybe you could share how much power (watt) it needs with v11.1?
Regards

Nice

R9 280X finally broke the 300 H/S barrier with 11.1


Great WORK!!!

Hi adaseb, could please share what settings are you using for getting such high hash. I am only getting 250-260 on my 280x.
Thanks

I'm too lazy to turn off the rig and plug in the KillAWatt meter since there is a new version almost every week. Either way it uses alot of power. I think with version 8.0 or 9.0 it used 1 H/S = 1 Watt. The GPUs were also slightly undervolted.

Pretty sure its much higher now.

My 280x's are at 165-170watts at 270h/s tdp lowered at 150w +20% powertune. 975/1500 some are at 1.0V. Also modded memory straps. also reached 300h/s at stock but a lot hotter.  

[devlin]

I'm only getting about 270H/s on a 290, is that unusual?

If you have reference card take a look at:
http://www.overclock.net/t/1564219/modded-r9-390x-bios-for-r9-290-290x-updated-02-16-2016

1000/1250 335-340H/s

[fmz89]

AMD VEGA running 970 sol at 100watt, damn

nano on new driver for windows running 4% better on optiminer 1.4.0

[bradli]

I'm only getting about 270H/s on a 290, is that unusual?

put "-asm 0" in command line

[Flarus]

Has established 11.1 writes a mistake on 3 x R9 290:

-asm 1,0,1 set

GPU #1 error but work!

GPU #1 is going to use too high intensity 8, not enough memory, intensity value reduced (7)
GPU #1 algorithm 1, intensity 7

I have 6Gb ROM and virtual mamory 16Gb

Problems?

[Demarsac]

Hello Claymore, we are releasing new ethOS version soon. At the time of release, we will include the fastest linux miner available. If it is Optiminer, it will be Optiminer. If it is Claymore, it will be Claymore.

We have 5000+ rigs on ethos, that means your mining fee will be the equivalent of 100 rigs. Will you release linux version soon? The choice is yours.

No need to pressure Claymore

You can put Opti for now and when Clay releases v11.1 on linux you can add it then on ethOS

Users can then have both miners and choose whichever suits them?

Just a thought

[mafaz]

Claymore's ZCash AMD GPU Miner.
=========================
-asm   try faster assembler algorithm implementation when possible, it is less compatible but faster. Specify "-asm 0" to disable this option.
   You can also specify values for every card, for example "-asm 0,1,0". Default value is "1".
   Assembler implementation is available for some cards only, miner displays "algorithm ASM" when it is available.

Does rx470 support it? cause when miner starts i dont see miner displaying "algorithm ASM" and asm is set to 1

[O_m]

11.1
5 x RX480 4Gb, 1350\2100 mod bios (1750 -> ...)
ZEC - Total Speed: 1405.122 H/s
ZEC: GPU0 281.104 H/s, GPU1 281.387 H/s, GPU2 280.558 H/s, GPU3 282.044 H/s, GPU4 280.038 H/s