rozsada
Member
Offline
Activity: 105
Merit: 10
|
|
January 08, 2017, 05:15:29 PM |
|
v10
280x ~230 h/s a1 390 ~330 h/s a1 fury ~385-390 h/s a2 480 ~275-282 h/s a2
my 290x is hitting ~319 h/s in v9.3 ......at v10 it is only ~314 h/s at a1 algorithm
question: how can i set different -a option in a rig with different cards? i want a1 for my 280x and a2 for my 480 in the same rig.
Readme.txt!!! -a algoritm selection. Possible values: 0..3. 0 - autodetect. You can also specify values for every card, for example "-a 0,3,1". Default value is "0".
|
|
|
|
Vlado
Newbie
Offline
Activity: 15
Merit: 0
|
|
January 08, 2017, 05:19:02 PM |
|
Hi guys. I have been using 9.2 on two rigs and as 01.01.2017 when the rig restarts by some reason I'm getting this weird freeze of the miner. It hangs after "POOL version". Unfortunately when i'm not around to see that it will stay like this for hours. I use Nicehash pool. This happens once in a while on both rigs. What could be the problem - pool, miner or rig system?
|
|
|
|
naeme18720
|
|
January 08, 2017, 05:23:29 PM |
|
V 10 ...rx 470 4gb
243h/s
what are your setting? I only get 233 h/s for sapphire rx 470 4gb Gpu clock 1250 memory clock 1750 -75mv 245h/s MY mined zcash in this pool...best pool in my idea This link SING IN in pool https://minergate.com/a/e172e848728edd0d2b97b9b5
|
|
|
|
Lucky - Luciano
|
|
January 08, 2017, 05:31:20 PM |
|
Hi guys. I have been using 9.2 on two rigs and as 01.01.2017 when the rig restarts by some reason I'm getting this weird freeze of the miner. It hangs after "POOL version". Unfortunately when i'm not around to see that it will stay like this for hours. I use Nicehash pool. This happens once in a while on both rigs. What could be the problem - pool, miner or rig system?
Government, why do not you use version 10 because it has better performance? Your problem may be the result of excessive overclocking or too downvolt. Try to reduce the clock (if you are overclocking ) or increase the voltage.
|
|
|
|
Vlado
Newbie
Offline
Activity: 15
Merit: 0
|
|
January 08, 2017, 05:46:34 PM |
|
Hi guys. I have been using 9.2 on two rigs and as 01.01.2017 when the rig restarts by some reason I'm getting this weird freeze of the miner. It hangs after "POOL version". Unfortunately when i'm not around to see that it will stay like this for hours. I use Nicehash pool. This happens once in a while on both rigs. What could be the problem - pool, miner or rig system?
Government, why do not you use version 10 because it has better performance? Your problem may be the result of excessive overclocking or too downvolt. Try to reduce the clock (if you are overclocking ) or increase the voltage. Switching to v10 is a valid point I will do that. I was just curious if anyone else had such issue. I run RX 480 8G NITRO+ OC with slight adjustments: core clock 1250, memory clock 2125. Everything else is stock. The interesting thing is that this problem started this year. Thanks and regards!
|
|
|
|
reb0rn21
Legendary
Offline
Activity: 1898
Merit: 1024
|
|
January 08, 2017, 05:56:48 PM |
|
I had 256H/s for my RX 480 8GB now it's at 286H/s, massive improvement for these cards. (It is overclocked to 1370/2250.)
How is possible so many overclocking? I have 6 x SAPPHIRE RX480 OC + 8 Gb (default clock is 1342/2000 MHz) and overclock with the GPU power +0 freezes my computer. At 2100 MHZ of memory is stable only a few hours. Which graphics card you have and which OC software do you use? Its like that when you listen some freaks from bench forum and put 6x 480 on ~1000w PSU
|
|
|
|
merc1969
Jr. Member
Offline
Activity: 78
Merit: 1
|
|
January 08, 2017, 06:13:12 PM |
|
Any place / documentation on which are the supported graphics card for using Claymore's GPU Miner ?
I have an AMD Radeon HD 6450 it does not seem to be supported. It only using the CPU . I had tried with v9.3 and also with 7.x I have the latest drivers installed ( Crimson ReLive Edition 16.12.2 ) installed . But it does not seem to be working . This is the message on the console it gives :
ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:01 ZEC: GPU0 0.000 H/s
with niceminer (nheqminer_v0.4b_suprnova) for windows and using suprnova pool, am getting around 7.69 to 8 Sols/s. Is this quite low for this configuration or is it just about the speed that one can get with this config ?
Any pointers are appreciated.
|
|
|
|
arielbit
Legendary
Offline
Activity: 3416
Merit: 1059
|
|
January 08, 2017, 06:16:37 PM |
|
v10
280x ~230 h/s a1 390 ~330 h/s a1 fury ~385-390 h/s a2 480 ~275-282 h/s a2
my 290x is hitting ~319 h/s in v9.3 ......at v10 it is only ~314 h/s at a1 algorithm
question: how can i set different -a option in a rig with different cards? i want a1 for my 280x and a2 for my 480 in the same rig.
Readme.txt!!! -a algoritm selection. Possible values: 0..3. 0 - autodetect. You can also specify values for every card, for example "-a 0,3,1". Default value is "0". thanks..didn't look at the readme.txt because i always look at the OP.. i guess claymore didn't put it there yet
|
|
|
|
Mitja1998
Newbie
Offline
Activity: 56
Merit: 0
|
|
January 08, 2017, 06:18:12 PM |
|
Any place / documentation on which are the supported graphics card for using Claymore's GPU Miner ?
I have an AMD Radeon HD 6450 it does not seem to be supported. It only using the CPU . I had tried with v9.3 and also with 7.x I have the latest drivers installed ( Crimson ReLive Edition 16.12.2 ) installed . But it does not seem to be working . This is the message on the console it gives :
ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:01 ZEC: GPU0 0.000 H/s
with niceminer (nheqminer_v0.4b_suprnova) for windows and using suprnova pool, am getting around 7.69 to 8 Sols/s. Is this quite low for this configuration or is it just about the speed that one can get with this config ?
Any pointers are appreciated.
if nothing else Works try claymore's cryptonote miner v9.7. I think it works there
|
|
|
|
d57heinz
Legendary
Offline
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks
|
|
January 08, 2017, 06:27:35 PM |
|
12:29:13:212 12f8 GPU #0: Ellesmere, 8192 MB available, 36 compute units 12:29:13:218 12f8 GPU #1: Ellesmere, 4096 MB available, 36 compute units 12:29:13:224 12f8 GPU #2: Ellesmere, 8192 MB available, 36 compute units 12:29:13:230 12f8 GPU #3: Ellesmere, 8192 MB available, 36 compute units 12:29:13:235 12f8 GPU #4: Ellesmere, 8192 MB available, 36 compute units 12:29:13:241 12f8 GPU #5: Ellesmere, 8192 MB available, 36 compute units 12:29:13:242 12f8 ZEC - Total Speed: 1516.824 H/s, Total Shares: 93, Rejected: 0, Time: 00:06 12:29:13:252 12f8 ZEC: GPU0 261.389 H/s, GPU1 219.221 H/s, GPU2 259.277 H/s, GPU3 259.841 H/s, GPU4 255.875 H/s, GPU5 261.221 H/s 12:29:13:256 12f8 Pool switches: ZEC - 0 12:29:13:261 12f8 Current ZEC pool share target: 0x00078787 (diff: 8704H) 12:29:13:332 12f8 GPU0 t=56C fan=54%, GPU1 t=55C fan=56%, GPU2 t=73C fan=66%, GPU3 t=69C fan=50%, GPU4 t=70C fan=60%, GPU5 t=57C fan=69% 12:29:13:339 12f8 12:29:15:815 1250 GPU0 t=56C fan=55%, GPU1 t=55C fan=55%, GPU2 t=73C fan=66%, GPU3 t=69C fan=50%, GPU4 t=71C fan=61%, GPU5 t=57C fan=69% great improvemnt on rx480 all stock clocks with 15% powerlimit+. using reference design xfx with 2000 mem and 1328 clocks. same rig also has powercolor red devil 480 same speeds.. the slow one is the gpu connected to monitor. its an asus rx480 4g.. its my slowest card Thanks for the great work Claymore! BR
|
As in nature, all is ebb and tide, all is wave motion, so it seems that in all branches of industry, alternating currents - electric wave motion - will have the sway. ~Nikola Tesla~
|
|
|
kev7112001
|
|
January 08, 2017, 06:44:18 PM |
|
I tried with 15.12. and pasting bin files from Linux version. Was getting 2000 h/s on Claymore 9.3 with 4x 290x and 2x290, on v10 getting 2005. Tried with -a 0 1 2 and 3, and max is 2005. With optiminer getting 2060, so I'm staying on optiminer for now . yeah optiminer is the fastest amd miner at the moment no it isnt i get 355 on 290x's on v9.3 also u can run both people if its slower than 9.3 for some cards run 10 on those 9.3 on the others and ofc with speed increases the power is gonna go up u are using more cycles
|
MCXNOW MODERATOR
|
|
|
arielbit
Legendary
Offline
Activity: 3416
Merit: 1059
|
|
January 08, 2017, 06:47:54 PM |
|
what is wrong with my 280X? seems 280x beats rx 480 again? LOL!
|
|
|
|
beIbox
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 08, 2017, 07:11:15 PM |
|
I can't believe this
|
|
|
|
VL2D
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 08, 2017, 07:12:06 PM |
|
|
|
|
|
rpg
|
|
January 08, 2017, 07:22:37 PM |
|
Any place / documentation on which are the supported graphics card for using Claymore's GPU Miner ?
I have an AMD Radeon HD 6450 it does not seem to be supported. It only using the CPU . I had tried with v9.3 and also with 7.x I have the latest drivers installed ( Crimson ReLive Edition 16.12.2 ) installed . But it does not seem to be working . This is the message on the console it gives :
ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:01 ZEC: GPU0 0.000 H/s
with niceminer (nheqminer_v0.4b_suprnova) for windows and using suprnova pool, am getting around 7.69 to 8 Sols/s. Is this quite low for this configuration or is it just about the speed that one can get with this config ?
Any pointers are appreciated.
install driver version 15.12 and upgrade from there.
|
|
|
|
arielbit
Legendary
Offline
Activity: 3416
Merit: 1059
|
|
January 08, 2017, 07:32:35 PM |
|
what is wrong with my 280X? seems 280x beats rx 480 again? LOL! What miner do you use? claymore of course.. this 280x hitting 290 h/s in this two card rig... my other 280x rigs are only hitting 230 h/s.. maybe the rx 480 and 280x combo does the trick, will observe and experiment more later..
|
|
|
|
beIbox
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 08, 2017, 07:33:24 PM |
|
claymore of course.. this 280x hitting 290 h/s in this two card rig... my other 280x rigs are only hitting 230 h/s.. maybe the rx 480 and 280x combo does the trick, will observe and experiment more later.. Show us your GPU-Z screen
|
|
|
|
arielbit
Legendary
Offline
Activity: 3416
Merit: 1059
|
|
January 08, 2017, 07:43:57 PM |
|
what is wrong with my 280X? seems 280x beats rx 480 again? LOL! What miner do you use? claymore of course.. this 280x hitting 290 h/s in this two card rig... my other 280x rigs are only hitting 230 h/s.. maybe the rx 480 and 280x combo does the trick, will observe and experiment more later.. Show us your GPU-Z screen
|
|
|
|
kinsik
Newbie
Offline
Activity: 39
Merit: 0
|
|
January 08, 2017, 07:44:11 PM |
|
Hi, can anyone share modded bios for Rx 480 4g Sapphire card. I'm getting only 240 sols on it with 1330/1850 clocks Thank you beforehand.
|
|
|
|
clipto
Member
Offline
Activity: 311
Merit: 10
|
|
January 08, 2017, 08:13:35 PM |
|
So it seems whattomine gives lower hashrates for a RX470-4gb. Can anyone post his current 470 hashrate + power consumption with V10 please?
|
|
|
|
|