[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[djm34]

Just saw this...  Go get em!!

...This coin will be GPU mineable in no time.

Christian

Pool mining heavycoin with the CPU minerd has yielded about 52 coins in 24 hours (8 threads on an i7 3820 @ 3.6 GHz = 154 khash/s). Traded them for about 0.002 BTC at c-cex.com. It's nice to be able to mine at the same time my GPUs are mining scrypt, but... if we could GPU mine this coin at even just 5x the CPU hash rate, then it would be as profitable as other scrypt or scrypt jane coins (for me anyway).

I tried a bit. with 4 thread everything was ok, hovewer with 8, the gpu usage of the amd card (and/or the one on riser) was not stable at all . The gtx780ti didn't show this sort of behaviour.

[see360]

Pool mining heavycoin with the CPU minerd has yielded about 52 coins in 24 hours (8 threads on an i7 3820 @ 3.6 GHz = 154 khash/s)...

I tried a bit. with 4 thread everything was ok, hovewer with 8, the gpu usage of the amd card (and/or the one on riser) was not stable at all . The gtx780ti didn't show this sort of behaviour.

I'm CPU mining while mining middlecoin.com with -i 0,0,0 -H 2,2,2 on a 780ti and (2) 660ti, no errors or problems and I'm even surfing the web while maxing out at 8 threads. Not even a slow down on my GPU hash rate.

[djm34]

Pool mining heavycoin with the CPU minerd has yielded about 52 coins in 24 hours (8 threads on an i7 3820 @ 3.6 GHz = 154 khash/s)...

I tried a bit. with 4 thread everything was ok, hovewer with 8, the gpu usage of the amd card (and/or the one on riser) was not stable at all . The gtx780ti didn't show this sort of behaviour.

I'm CPU mining while mining middlecoin.com with -i 0,0,0 -H 2,2,2 on a 780ti and (2) 660ti, no errors or problems and I'm even surfing the web while maxing out at 8 threads. Not even a slow down on my GPU hash rate.

may-be it is only an amd problem ?

[see360]

Not being able to throw a lot at heavycoin might not be a problem at all, I'm having doubts that the price would hold up under selling volume.

[Coinman422]

im having trouble solo mining heavycoin. could someone one help me with the config and bat files?

-bat    cudaminer.exe --algo=scrypt-jane:1394480376,4,30 -d 0,1,2 -i 0 -H 2 -D -o 127.0.0.1:3343 -O user:pass

-conf    listen=1
maxconnections=25
gen=1
genproclimit=-1
rpcuser=user
rpcpassword=pass
rpcport=3433
p2pport=3433
rpcallowip=127.0.0.1
server=1
daemon=1

[djm34]

this is for BitLeu, Heavycoin is not yet implemented in cudaminer

I don't know if it is really possible to autotune 3 cards at the same time (I understood some were having problem with autotune crashing at the end)
I think, It would be easier to find a config for each card first

[liomojo1]

The chrome trick doesn`t work for risers!!!!!!!!!

[ManIkWeet]

The chrome trick doesn`t work for risers!!!!!!!!!

Because risers!

[redrip]

/usr/bin/ld: cudaminer-cpu-miner.o: undefined reference to symbol 'SHA256'
/usr/lib/libcrypto.so.1.0.0: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
Makefile:376: recipe for target 'cudaminer' failed
make[2]: *** [cudaminer] Error 1

any ideas?
yesterday git worked just fine

hmm need to link to OpenSSL libraries now... maybe that is not done yet.

The patch I supplied had a modified configure.ac. However, to make it work you have to completely clean everything flat and regenerate all the autoconf stuff. "make distclean" and run autogen.sh again.

I'm in the same boat, getting similar errors and not sure how to proceed...

For Reference, I just installed Ubuntu 13.10 today and am trying for the life of me to get Cudaminer to compile for my gtx750 ti's, error after error, finally keep getting this below..

Code:

cudaminer-cpu-miner.o: In function `stratum_gen_work':
/home/ted/Downloads/CudaMiner-master/cpu-miner.c:728: undefined reference to `SHA256'
fermi_kernel.o: In function `KernelInterface::do_blake256(dim3, dim3, int, int, unsigned int*, unsigned int, int, bool)':
/home/ted/Downloads/CudaMiner-master/salsa_kernel.h:104: undefined reference to `default_do_blake256'
fermi_kernel.o: In function `KernelInterface::prepare_blake256(int, unsigned int const*, unsigned int const*)':
/home/ted/Downloads/CudaMiner-master/salsa_kernel.h:101: undefined reference to `default_prepare_blake256'
collect2: error: ld returned 1 exit status
make[2]: *** [cudaminer] Error 1
make[2]: Leaving directory `/home/ted/Downloads/CudaMiner-master'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/ted/Downloads/CudaMiner-master'
make: *** [all] Error 2
ted@miner1:~/Downloads/CudaMiner-master$ 

[bigjme]

anyone interested in BitLeu, there are no pools working so its 100% solo mining right now
on another note, when i leave my system mining and turn off my display, when ever i turn the screen on again i can never get the screen to wake up after a few hours? hmmm
think my windows system is dieinggggg

[jack80]

Ok I have reached the limit GPU +250 mhz +550 mhz and Memory

640 kh/s total consumption of 2 cards from the meter to the house by removing the pc I think it's 50 watts each.

ORIGINAL BIOS

windows 7 64 bit, cudaminer x86 (32-bit) with these parameters and the browser CHROME OPEN.

-0-H 2-l T10x24-m 1-b 4096

Here is a screen of my 2 MSI 750ti, Driver 335.23 MSI Afterburner Overclocking 2.3.1:



You can do better ? .

[djm34]

anyone interested in BitLeu, there are no pools working so its 100% solo mining right now
on another note, when i leave my system mining and turn off my display, when ever i turn the screen on again i can never get the screen to wake up after a few hours? hmmm
think my windows system is dieinggggg

I might get back later on, but blocks are not coming as easily as yesterday...
But I need to reach 1000 exe first.... or before everybody on gpuc has left the boat to mine execoin...

[bigjme]

I'm surprised they haven't left already. The value of the coin is way too low to be worth it

[redrip]

/usr/bin/ld: cudaminer-cpu-miner.o: undefined reference to symbol 'SHA256'
/usr/lib/libcrypto.so.1.0.0: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
Makefile:376: recipe for target 'cudaminer' failed
make[2]: *** [cudaminer] Error 1

any ideas?
yesterday git worked just fine

hmm need to link to OpenSSL libraries now... maybe that is not done yet.

The patch I supplied had a modified configure.ac. However, to make it work you have to completely clean everything flat and regenerate all the autoconf stuff. "make distclean" and run autogen.sh again.

I'm in the same boat, getting similar errors and not sure how to proceed...

For Reference, I just installed Ubuntu 13.10 today and am trying for the life of me to get Cudaminer to compile for my gtx750 ti's, error after error, finally keep getting this below..

Code:

cudaminer-cpu-miner.o: In function `stratum_gen_work':
/home/ted/Downloads/CudaMiner-master/cpu-miner.c:728: undefined reference to `SHA256'
fermi_kernel.o: In function `KernelInterface::do_blake256(dim3, dim3, int, int, unsigned int*, unsigned int, int, bool)':
/home/ted/Downloads/CudaMiner-master/salsa_kernel.h:104: undefined reference to `default_do_blake256'
fermi_kernel.o: In function `KernelInterface::prepare_blake256(int, unsigned int const*, unsigned int const*)':
/home/ted/Downloads/CudaMiner-master/salsa_kernel.h:101: undefined reference to `default_prepare_blake256'
collect2: error: ld returned 1 exit status
make[2]: *** [cudaminer] Error 1
make[2]: Leaving directory `/home/ted/Downloads/CudaMiner-master'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/ted/Downloads/CudaMiner-master'
make: *** [all] Error 2
ted@miner1:~/Downloads/CudaMiner-master$ 

Getting closer?...

TIME   -g -O2 -MT cudaminer-cpu-miner.o -MD -MP -MF .deps/cudaminer-cpu-miner.Tpo -c -o cudaminer-cpu-miner.o `test -f 'cpu-miner.c' || echo './'`cpu-miner.c
cpu-miner.c:38:25: fatal error: openssl/sha.h: No such file or directory
compilation terminated.
make[2]: *** [cudaminer-cpu-miner.o] Error 1
make[2]: Leaving directory `/home/evan/Downloads/CudaMiner-master'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/evan/Downloads/CudaMiner-master'
make: *** [all] Error 2

[djm34]

I'm surprised they haven't left already. The value of the coin is way too low to be worth it

some people are really delusional... (I say that... but I still believe in MRC   which clearly at the moment relies more on faith that fact...)

[bigjme]

I'm surprised they haven't left already. The value of the coin is way too low to be worth it

some people are really delusional...

I was on that coin till about 3 hours after it went to the proper block reward. On my 780 it would take over a year to earn 1 bitcoin.  I would just about break even on power.

And it's dropped a lot since then. Such a waste but it keeps the amd guys away from anything we want

[djm34]

I'm surprised they haven't left already. The value of the coin is way too low to be worth it

some people are really delusional...

I was on that coin till about 3 hours after it went to the proper block reward. On my 780 it would take over a year to earn 1 bitcoin.  I would just about break even on power.

And it's dropped a lot since then. Such a waste but it keeps the amd guys away from anything we want

My strategy was to join a p2pool during sunday afternoon while the block was still at 1 gpuc and accumulate a lot of share when they were easy to get and switch to a normal pool when the block 2600 hit the network
It did pay off somehow (was able to get 13000gpuc from the p2pool) however the payout on the normal pool dropped pretty fast (3000 overnight ) and I went back to exe right in the morning.
I wish I had dumped my stack then...

[jack80]

Dont work cudaminer maxwell with BTL and my 2 750 ti

I try this pool :

http://btl.okaypool.com/

and this settings :

cudaminer.exe --algo=scrypt-jane:1394480376,4,30 -o stratum+tcp://btl11.okaypool.com:3369 -u xxx.1 -p xxx -l T120x24

Whats Wrong Help Pls .

[ManIkWeet]

Dont work cudaminer maxwell with BTL and my 2 750 ti

I try this pool :

http://btl.okaypool.com/

and this settings :

cudaminer.exe --algo=scrypt-jane:1394480376,4,30 -o stratum+tcp://btl11.okaypool.com:3369 -u xxx.1 -p xxx -l T120x24

Whats Wrong Help Pls .

My leg stopped working, please fix it.
The doctor would now ask why it doesn't work, no feeling, not moving?
So, I, being a doctor, would ask what CudaMiner is telling you... because with just the launch code we can't fix anything.

[jack80]

Cudaminer work but only boooooo! , Never yay!!! .