EWBF's CUDA Zcash miner

[kaltar]

Cuda Zcash miner of EWBF V 0.34b Does not improve Hast rate (+ 2%) Miner contains dev fee 2%.

Well it did for me. 

Pff ...
I guess I should thank 

1% fee Flypool
2% EWBF
+ Diff

Does not have Hash rate improvements..

Really .? you're criticizing .? this is a free mining software and the best one for nvidia, i'll happily pay the dev fee, and there IS a small speed increase on my 1080 , went from 480 ish to 495ish, great work. and to people like you, if you're not happy with the dev's improvements, his fees or his hard work. go troll another thread and try, and just try to find another mining software as good as this one for free (well 2% dev fee is FREE in my book)

[LuisMafixD]

Cuda Zcash miner of EWBF V 0.34b Does not improve Hast rate (+ 2%) Miner contains dev fee 2%.

Well it did for me. 

Pff ...
I guess I should thank 

1% fee Flypool
2% EWBF
+ Diff

Does not have Hash rate improvements..

Really .? you're criticizing .? this is a free mining software and the best one for nvidia, i'll happily pay the dev fee, and there IS a small speed increase on my 1080 , went from 480 ish to 495ish, great work. and to people like you, if you're not happy with the dev's improvements, his fees or his hard work. go troll another thread and try, and just try to find another mining software as good as this one for free (well 2% dev fee is FREE in my book)

It is a trial version, not completely optimum it was totally free, they have no improvement.

GTX 1070
GTX 1080
GTX 1080 TI

Little better 1% still gives the same Has rate version earlier. You can pay 5% if you improve Hast rate.

[minerx117]

Version 0.3.4b released.
Many new features on the way.
Web page screenshot: https://s4.postimg.org/opjzemkwt/Screenshot_20170611_220048.png

Thank you EWBF for making and maintaining the fastest Zcash (equihash) Miner for Nvidia Cards

Best Regards
#Nemo

[naykos74]

Hey I just created this account to say thanks, started mining 2 weeks ago because why not. I got a little boost from this version with a 1060 6gb, I never say anything higher than 345 sol/s previously, and in couple minutes already say a 349 sol/s. If I see a 350 i'll flip out.

https://i.imgur.com/4SDbBY7.png

[Bulletdodger]

I'm mining with 1070's, I OC'ed them and cant get past 450 for the most part,
can you achieve higher "revs"?

[Vaccinus]

when the source code will be released of this? i feel we need it to be secure, i would to compile it myself, there is no need to have it private if you can remove the fee right? so why it's still private?

Can someone post me an nvidia-smi from a 1080TI?

consumption?

[Heguli97]

Great update so far.

I'm running 2 1080Ti's and getting 740 Sol/s on 243 watts.

[prologas]

Great update so far.

I'm running 2 1080Ti's and getting 740 Sol/s on 243 watts.

Hmmmm that power...

Running two 1080ti as you

665 Sol/s at 179W

[KL0nLutiy]

Went from ~355-360 sols to 365-375 with new miner version (GTX 980), so everyone consider updating even if you don't have Pascal cards! Thanks for your work, EWBF!

How did you get 350 sol? What settings did you use?

[NasaSpy]

damn that miner is good. Getting stable 500+ Sol/s with EVGA ftw gtx 1070 and it does go up to 505... while I was getting 440 at most with nicehash. Thanks and keep up the good work!

@2114mhz
88-89%tdp / 160w
1.0620v

[Heguli97]

Great update so far.

I'm running 2 1080Ti's and getting 740 Sol/s on 243 watts.

Hmmmm that power...

Running two 1080ti as you

665 Sol/s at 179W

3.2 Sol/W is good enough for me, since the electricity is not that expensive here. And i mined nearly 300$ in 10 days, with 2 cards.

[dannygroove]

when the source code will be released of this? i feel we need it to be secure, i would to compile it myself, there is no need to have it private if you can remove the fee right? so why it's still private?

Can someone post me an nvidia-smi from a 1080TI?

consumption?

Yes, would appreciate that!

[ayke99]

when the source code will be released of this? i feel we need it to be secure, i would to compile it myself, there is no need to have it private if you can remove the fee right? so why it's still private?

Can someone post me an nvidia-smi from a 1080TI?

consumption?

Yes, would appreciate that!

0.3.4b
+200 +550
Msi gaming 1080ti 80% ~210W ~3,5 sol/W  ~735 sol/s  temp 61C
Asus Founders 1080ti 80% ~205 ~3,2 sol/W ~700 sol/s  temp 68C

[JamesAdams]

damn that miner is good. Getting stable 500+ Sol/s with EVGA ftw gtx 1070 and it does go up to 505... while I was getting 440 at most with nicehash. Thanks and keep up the good work!

@2114mhz
88-89%tdp / 160w
1.0620v

Wow how do you get such high hashrates? I can only get ~470 sols at max core voltage (1.093V) 2126MHz Core 4233MHz memory and power limit to 105%. You are getting around 30 sol/s more than me even though our speeds are almost the same... What commands do you enter when you run the miner?

[Vaccinus]

when the source code will be released of this? i feel we need it to be secure, i would to compile it myself, there is no need to have it private if you can remove the fee right? so why it's still private?

Can someone post me an nvidia-smi from a 1080TI?

consumption?

Yes, would appreciate that!

it depend on the tdp, with 80% at least 200w up to 225w, with 100% it can go above 300watt which is too high, anyway and not worth to put the gpu under that stress with this summer

[Malbo]

someone have an example of zcash .bat suprnova configuration ? really dont understand what to put where...

"EWBF's CUDA Zcash miner
miner.exe --server zec.suprnova.cc --user suprnova.1 --pass x --port 142  --cuda_devices 0 1 2 3 "

when i change password or user it's dont work...

thanks!

[saul.goodman]

someone have an example of zcash .bat suprnova configuration ? really dont understand what to put where...

"EWBF's CUDA Zcash miner
miner.exe --server zec.suprnova.cc --user suprnova.1 --pass x --port 142  --cuda_devices 0 1 2 3 "

when i change password or user it's dont work...

thanks!

Port + server looks wrong
Worker added? (My account -> my worker)


Here is my .bat:
miner --server zec-eu.suprnova.cc --user xxxxxx  --pass xxxxx --port 2142

[yslyung]

example of how to use --config ? tried but didn't work for me, maybe i got it wrong. i've changed miner.cfg to my pool n add. thx op

[MindALot]

Anyone use mining pool hub with EWBF miner on Linux?

I do not know if mining pool hub will return no work, or disconnect to for an autoswitch.

I do not know if we can configure EWBF to exit if it gets a 'no work' response from a mining pool.

Thanks !

[MindALot]

someone have an example of zcash .bat suprnova configuration ? really dont understand what to put where...

"EWBF's CUDA Zcash miner
miner.exe --server zec.suprnova.cc --user suprnova.1 --pass x --port 142  --cuda_devices 0 1 2 3 "

when i change password or user it's dont work...

thanks!

1) Hopefully you don't have "'s spanning the two lines.  that might cause problems.

2) Did you create an account profile on zec.suprnova.cc ?  You have to have an account for each currency, so even if you created one for another currency, you have to go back in specifically for zec.

3) You don't have to specify cuda_devices (if you want to use all).

4) I think the help text has an error - I believe you want to use port 2142, not 142 (but I could be wrong)