EWBF's CUDA Zcash miner

[QuintLeo]

guys... what is the factor for mining speed in equihash? is it bigger core clock or memory clock? and is that true that 280X is perform the same to 1060?
and one more... is it better mining in win 7 or win 10?

thanks before 

 R9 280x with a good overclock (but not BIOS modded) can hit  somewhere close to 300 sol/s as I recall. Definitely over 250.

 I've had my pair doing other stuff for a while though, after the machine they were on decided to crash Win7 and corrupt the installation I decided it was time to move it to LINUX.

[vince212]

Hey guys how can i check my sol/w?

[bonosurgut]

1070 performance on 0.3.4b? Anyone?  

I just received my first 1070 yesterday.
(an EVGA FTW, just running at stock speeds now)
Still new at this, have been using EWBF for about a week.

EWBF says  ~445 Sol/s, 150W.  The watts figure closely matches my Kill-A-Watt. The Sol/s seem reasonable.

Good luck!

i have 3 EVGA 1070, do like on screenshot and you get 500 sol ) On Samsung Memory ~505, All my card have Micron (

[mcoinm]

Hi, I've got a few questions for anybody who uses the miner on linux/ubuntu, don't have very much experience at all with using linux. I've got a few 1080ti's, and I've installed the latest proprietary Nvidia drivers. I've seen people mention installing cuda as well though. Is that necessary, and if so, does it come along with the regular nvidia drivers, or is it something extra to install? Also, compared to the windows version of the miner, do all the same commands work? As in things like fee, pec, etc. Just add them to the config file as extra parameters, under the common section? In addition, is there some convenient place to see the stats as they come in, like the windows command prompt shows you when it's running on windows? I know you can go and see the web console, and see a snapshot of the stats, but there's no equivalent of the constantly running stats that the windows version had?

[Heguli97]

Hi, I've got a few questions for anybody who uses the miner on linux/ubuntu, don't have very much experience at all with using linux. I've got a few 1080ti's, and I've installed the latest proprietary Nvidia drivers. I've seen people mention installing cuda as well though. Is that necessary, and if so, does it come along with the regular nvidia drivers, or is it something extra to install? Also, compared to the windows version of the miner, do all the same commands work? As in things like fee, pec, etc. Just add them to the config file as extra parameters, under the common section? In addition, is there some convenient place to see the stats as they come in, like the windows command prompt shows you when it's running on windows? I know you can go and see the web console, and see a snapshot of the stats, but there's no equivalent of the constantly running stats that the windows version had?

If you are thinking about mining on linux, you should check out this distro specifically made for nvidia gpu mining https://bitcointalk.org/index.php?topic=1854250.0
It's the easiest one to use. 

[aquavici]

Hi, could somebody tell me what's solver # meaning? differents mining alg?

[sublimus]

hi i`m new to ming and i have a  problem/question: why 1 card is not on the same performance as the other 3 always is a difference between,is there a bios setting or something like this that i`m missing ?

my mining rig :mobo z270 a prime (bios up to date , above 4g enable set, video on mobo ), 4 gtx 1080ti gaming x clock +150 +400 :
1.GeForce GTX 1080 Ti   64 C   206 W   753 Sol/s   3.66 Sol/W       
2.GeForce GTX 1080 Ti   61 C   208 W   752 Sol/s   3.62 Sol/W       
3.GeForce GTX 1080 Ti   58 C   206 W   753 Sol/s   3.66 Sol/W       
4.GeForce GTX 1080 Ti   65 C   204 W   724 Sol/s   3.51 Sol/W

All cards are not built equal. The % tolerance is not the same from a component to another. That is why some cards
perform above the average and others under the average.

[Abcederian]

Hey guys how can i check my sol/w?

I found this CL earlier in the thread. the --pec in your command line generates the text. I think you can see that in the readme.txt

:restart
Timeout /t 30
miner --server eu1-zcash.flypool.org --user t1cA38xyUxJRDdQYacD6x7UUL8nyjTfKeo1.GigaGamer --pass x --port 3333 --eexit 3 --solver 0 --log 2 --logfile ZCASH.%date:~6,4%%date:~3,2%%date:~0,2%.ewbf.log --fee 2 --pec
ping 127.0.0.1 > nul
goto :restart

[sublimus]

Hi, could somebody tell me what's solver # meaning? differents mining alg?

solver 0 = most recent GPU

[GOLDbarISmine]

any improvements to GTX 1080 Ti on this new version?

[Abcederian]

Version 0.3.4b released.
Many new features on the way.
Web page screenshot: https://s4.postimg.org/opjzemkwt/Screenshot_20170611_220048.png

What do I need to add to command line to get this table?
TIA

[iamnewhere]

MSI GTX 1070 Gaming X 8g > 470-480 Sol/s @ 160W (2.94 Sol/W) - doesn't look to bad i think

[iamnewhere]

What do I need to add to command line to get this table?
TIA

--api 127.0.0.1:42000

add this to your command line and then open in browser http://127.0.0.1:42000

[Bulletdodger]

Did somebody try this code? It works?

[el3c]

I am getting great 470 sols for each 1070 while using 146W per card, this ok.... i can also get 420 sols with 107W, both working fine

But i have question with accepted share:

now with the built in webserver its easier to take a look about the performance and i am wondering about that:

GPU                         Temp   Power   Speed   Efficiency   Accepted   Rejected

GeForce GTX 1070   60 C   147 W   470 Sol/s   3.21 Sol/W   221   0
GeForce GTX 1070   54 C   145 W   466 Sol/s   3.17 Sol/W   284   0

So why had my second card more accepted at the same speed? Is that ok or did i had tofix something?

[dnyt]

I am getting great 470 sols for each 1070 while using 146W per card, this ok.... i can also get 420 sols with 107W, both working fine

But i have question with accepted share:

now with the built in webserver its easier to take a look about the performance and i am wondering about that:

GPU                         Temp   Power   Speed   Efficiency   Accepted   Rejected

GeForce GTX 1070   60 C   147 W   470 Sol/s   3.21 Sol/W   221   0
GeForce GTX 1070   54 C   145 W   466 Sol/s   3.17 Sol/W   284   0

So why had my second card more accepted at the same speed? Is that ok or did i had tofix something?

that is normal.

Do you work as good and equal as your co-worker?
Same with your GPU's, one card got luckier than the other...
You have 0 Reject so you are good!

[iamnewhere]

I am getting great 470 sols for each 1070 while using 146W per card, this ok.... i can also get 420 sols with 107W, both working fine

Did you lower the memory clock and / or the core clock to go down to 107W? On how many V are you running?

[ayke99]

hi i`m new to ming and i have a  problem/question: why 1 card is not on the same performance as the other 3 always is a difference between,is there a bios setting or something like this that i`m missing ?

my mining rig :mobo z270 a prime (bios up to date , above 4g enable set, video on mobo ), 4 gtx 1080ti gaming x clock +150 +400 :
1.GeForce GTX 1080 Ti   64 C   206 W   753 Sol/s   3.66 Sol/W       
2.GeForce GTX 1080 Ti   61 C   208 W   752 Sol/s   3.62 Sol/W       
3.GeForce GTX 1080 Ti   58 C   206 W   753 Sol/s   3.66 Sol/W       
4.GeForce GTX 1080 Ti   65 C   204 W   724 Sol/s   3.51 Sol/W

All cards are not built equal. The % tolerance is not the same from a component to another. That is why some cards
perform above the average and others under the average.

i understand this , but the strange thing is if i change the place of the gpu in the rig , she works better or if i put her on nicehash ... i have 2 rigs(2x4gpu) and the last one always underperform (gpu 3) with ewbf , could be the dev fee there ?

[ayke99]

hi i`m new to ming and i have a  problem/question: why 1 card is not on the same performance as the other 3 always is a difference between,is there a bios setting or something like this that i`m missing ?

my mining rig :mobo z270 a prime (bios up to date , above 4g enable set, video on mobo ), 4 gtx 1080ti gaming x clock +150 +400 :
1.GeForce GTX 1080 Ti   64 C   206 W   753 Sol/s   3.66 Sol/W       
2.GeForce GTX 1080 Ti   61 C   208 W   752 Sol/s   3.62 Sol/W       
3.GeForce GTX 1080 Ti   58 C   206 W   753 Sol/s   3.66 Sol/W       
4.GeForce GTX 1080 Ti   65 C   204 W   724 Sol/s   3.51 Sol/W

I have same problem, but on much larger scale. Got 6x GTX 1060 and Z270A PRO mbo, all cards on risers and last gpu connected on mbo gives only half power.

This is my stats in ewbf:
https://i.imgur.com/DkWuERI.png

 

I think you should set --solver 0 0 0 0 0 in your comand line or trie to translate from russian this guy had the same issue https://forum.bits.media/index.php?/topic/31094-cuda-mainery-dlia-zcash-zec/?p=739396

[Heguli97]

any improvements to GTX 1080 Ti on this new version?

Yes, i get 15-20 Sol more with a MSI 1080ti Gaming X 11G
Total is around/over 770Sol/s now with 250 watts.