Temporel
|
|
July 26, 2017, 11:26:02 PM |
|
I'm currently reaching 800 Sols with 265watts (with 1080ti, 1999 Core, 5899 Mem, 981mv)
How many hours can you run it without crashing? This looks like the 1080Ti unicorn, no offense. I run 4 1080Ti in 2 computers and they never crash, same for my 1080 and 1070s.
|
|
|
|
farmtester
Newbie
Offline
Activity: 29
Merit: 0
|
|
July 27, 2017, 01:12:06 AM |
|
I run 4 1080Ti in 2 computers and they never crash, same for my 1080 and 1070s.
I'm asking the 800 sols guy with only 260w, that's either a 0.1% lucky silicon or a lie.
|
|
|
|
Heguli97
|
|
July 27, 2017, 01:28:48 AM |
|
I'm currently reaching 800 Sols with 265watts (with 1080ti, 1999 Core, 5899 Mem, 981mv)
Nice. Temperature ? Currently 64c while ambient is 25. Fanspeed is at 75%
|
|
|
|
Heguli97
|
|
July 27, 2017, 01:31:21 AM |
|
I'm currently reaching 800 Sols with 265watts (with 1080ti, 1999 Core, 5899 Mem, 981mv)
How many hours can you run it without crashing? This looks like the 1080Ti unicorn, no offense. My record is 5 days when i was taking a 7 day trip and wasn't home. I do use my PC actively so it crashes about every other day from using something like google maps . Edit: Did a bit of testing and it seems like my other 1080ti can do the same, only with almost 20 watts more, but i run into thermal problems because of the cards' close proximity to each other. these are the MSI 1080ti Gaming X'ses.
|
|
|
|
Za1n
Legendary
Offline
Activity: 1078
Merit: 1011
|
|
July 27, 2017, 01:47:47 AM |
|
Last night i put --fee 0 and in 24 hours i got about 5% less shares. It is true that it is better to leave dev fee as i see.
Yes, I believe EWBF codes the mining fee much the same way as Claymore, in that you are free to remove the fee but the program will run a little bit less efficiently. Thus in the end you are better off just paying the small fee and letting the miner run at its most optimized levels (as coded by the programmer). There are a few open source software implementations out there that come close, but you are usually on your own to try and get the same level of performance out of them as the fee based ones. After all, there is a reason people are willing to pay the fee.
|
|
|
|
Saki3d
Newbie
Offline
Activity: 40
Merit: 0
|
|
July 27, 2017, 06:41:16 AM |
|
Hi, Yesterday while i was sleeping hashrate drops 0 and the rig was keeping mining. Is there any solution when rig not getting sol restart rig automatically?
I am using simplemining and zcash.flypool Thanks.
|
|
|
|
giagge
Legendary
Offline
Activity: 1134
Merit: 1001
|
|
July 27, 2017, 08:18:16 AM |
|
Its all ok for me , great work very stable all time .
|
|
|
|
ALTasas
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 27, 2017, 09:43:58 AM |
|
Hi, Yesterday while i was sleeping hashrate drops 0 and the rig was keeping mining. Is there any solution when rig not getting sol restart rig automatically?
I am using simplemining and zcash.flypool Thanks.
You can try my solution which restarts miner when speed drops below limit: https://bitcointalk.org/index.php?topic=1707546.msg20063191#msg20063191
|
|
|
|
fredderf81
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 27, 2017, 11:56:40 AM |
|
hi all - just wiped and installed fresh copy of win7 64-bit - installed drivers/cuda, did windows updates, copied over ewbf miner, installed afterburner, run miner - detects 3x 1060gtx cards, instead of selecting solver, entire thing freezes. any ideas??? am i missing something? mainboard has latest bios. using current cuda and nvidia drivers.
|
|
|
|
cTnko
Member
Offline
Activity: 85
Merit: 10
|
|
July 27, 2017, 04:00:33 PM |
|
@EWBF_ could you please add timestamp to error messages? both --log 1 and 2 would be much more useful with timestamps, otherwise the error messages are a bit out of context
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
July 27, 2017, 04:32:34 PM |
|
@EWBF_ could you please add timestamp to error messages? both --log 1 and 2 would be much more useful with timestamps, otherwise the error messages are a bit out of context
TIMESTAMP IS A NEEDED FEATURE-- I totally agree with cTnko! I also suggest that the web-API report number of restarts in the second column, next to the "uptime", with the "connected" indicators above and below. You have a very good API display, thanks! --scryptr
|
|
|
|
Saki3d
Newbie
Offline
Activity: 40
Merit: 0
|
|
July 27, 2017, 05:47:42 PM |
|
Thank you for reply, i am using app from simplemining.net loging at this side has only one line to edit parameters i can not run exe files also. Sory for my English.
|
|
|
|
NvidiaMining
Newbie
Offline
Activity: 26
Merit: 0
|
|
July 27, 2017, 06:26:51 PM |
|
Hey guys, is this safe to use? I need something like this very much but have not seen any validations so far. If it's legit i'll let it run with dev's address for some time. Thanks
|
|
|
|
Temporel
|
|
July 27, 2017, 06:45:20 PM |
|
Hey guys, is this safe to use? I need something like this very much but have not seen any validations so far. If it's legit i'll let it run with dev's address for some time. Thanks you should try to fix your problem instead.
|
|
|
|
NvidiaMining
Newbie
Offline
Activity: 26
Merit: 0
|
|
July 27, 2017, 07:34:41 PM |
|
Hey guys, is this safe to use? I need something like this very much but have not seen any validations so far. If it's legit i'll let it run with dev's address for some time. Thanks you should try to fix your problem instead. Thanks for your advice. Im trying to, but get nowhere. My 3 1080 TIs trouble me, had them running for 7 days straight, now in the last 3 days they have stopped 5 times without me having changed anything (except your afterburner hint come to think of it, but that can't be it). It kinda sucks to wake up to idling machines...
|
|
|
|
Temporel
|
|
July 27, 2017, 07:46:32 PM |
|
Hey guys, is this safe to use? I need something like this very much but have not seen any validations so far. If it's legit i'll let it run with dev's address for some time. Thanks it crash even with the default Afterburner settings ? What drivers are you using ? you should try to fix your problem instead. Thanks for your advice. Im trying to, but get nowhere. My 3 1080 TIs trouble me, had them running for 7 days straight, now in the last 3 days they have stopped 5 times without me having changed anything (except your afterburner hint come to think of it, but that can't be it). It kinda sucks to wake up to idling machines...
|
|
|
|
sverox
Newbie
Offline
Activity: 42
Merit: 0
|
|
July 27, 2017, 08:05:40 PM |
|
@Saki3d @NvidiaMining Better solution for restart miner on error and stuck GPU with 0 sols. Download and info in this post. https://bitcointalk.org/index.php?topic=1707546.msg20014515#msg20014515Included flypool example. This is example config for supernova usage. ========================================================= set MINERPATH=C:\Zec Miner 0.3.4b\0.3.4b set EXE=miner.exe set varSeconds=60 set zecServer=zec.suprnova.cc set tAddress= username_for_suprnovaset wrkrName= registered_worker_nameset wrkrInfo=Rig 001 set wrkrEml=xxx@xxx.xxx set varExtraOptions=--pass worker_Password --port 2142 --tempunits C --templimit 80 --pec --api 0.0.0.0:42000 ========================================================= This is example config for slushpool usage. ========================================================= set MINERPATH=C:\Zec Miner 0.3.4b\0.3.4b set EXE=miner.exe set varSeconds=60 set zecServer=zec.slushpool.com set tAddress= userName_registered_slushpoolset wrkrName= workerNameset wrkrInfo=Rig 001 set wrkrEml=xxx@xxx.xxx set varExtraOptions=--pass x --port 4444 --tempunits C --templimit 80 --pec --api 0.0.0.0:42000 =========================================================
|
|
|
|
cTnko
Member
Offline
Activity: 85
Merit: 10
|
|
July 27, 2017, 08:23:20 PM |
|
Hey guys, is this safe to use? I need something like this very much but have not seen any validations so far. If it's legit i'll let it run with dev's address for some time. Thanks you should try to fix your problem instead. Thanks for your advice. Im trying to, but get nowhere. My 3 1080 TIs trouble me, had them running for 7 days straight, now in the last 3 days they have stopped 5 times without me having changed anything (except your afterburner hint come to think of it, but that can't be it). It kinda sucks to wake up to idling machines... Have you tried the --eexit 1 parameter with a simple :start, goto start loop in a batch file? It did wonders for me when i was trying to find a stable long time running overclock.
|
|
|
|
sp_
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
July 27, 2017, 08:55:57 PM |
|
make sure that you delete the .cgf file in the folder. If you loose connection to the pool the miner will mine on the dev adress.
|
|
|
|
NvidiaMining
Newbie
Offline
Activity: 26
Merit: 0
|
|
July 27, 2017, 09:33:22 PM |
|
Thanks for your advice. Im trying to, but get nowhere. My 3 1080 TIs trouble me, had them running for 7 days straight, now in the last 3 days they have stopped 5 times without me having changed anything (except your afterburner hint come to think of it, but that can't be it). It kinda sucks to wake up to idling machines...
Have you tried the --eexit 1 parameter with a simple :start, goto start loop in a batch file? It did wonders for me when i was trying to find a stable long time running overclock. Thanks for the tip, all set up and running for both rigs. Now it's time to wait and see!
|
|
|
|
|