crypper
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 239
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 20, 2018, 01:04:32 PM |
|
Version 0.3.4b. there are more than six months, do you plan the release of a new version of the program, what should be the settings to enable developers to receive payments for the work programme.
Don't think dev is around anymore. The dev fee is built in unless you use --fee 0. Beware you get a penalty in hash if you disable it and the fee is not just 2%. https://forum.z.cash/t/ewbf-dev-fee-almost-doubled-1-9-to-3-6-average/22460Here we go again. Don't listen to the noobs. There is no penalty. If interested search for Chub's post a few pages ago where he performed MITM on EWBF.
|
|
|
|
ivanlucci
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 20, 2018, 05:53:51 PM |
|
CUDA: Device: 0 Thread exited with code: 46 CUDA: Device: 1 Thread exited with code: 46 CUDA: Device: 2 Thread exited with code: 46 CUDA: Device: 3 Thread exited with code: 46 CUDA: Device: 4 Thread exited with code: 46 ERROR: Some workers are stopped. Attempt to restart: 2 CUDA: Device: 0 GeForce GTX 1070, 8192 MB M0 CUDA: Device: 0 Thread exited with code: 46 CUDA: Device: 1 GeForce GTX 1070, 8192 MB M0 CUDA: Device: 1 Thread exited with code: 46 CUDA: Device: 2 GeForce GTX 1070, 8192 MB M0 CUDA: Device: 2 Thread exited with code: 46 CUDA: Device: 3 GeForce GTX 1070, 8192 MB M0 CUDA: Device: 3 Thread exited with code: 46 CUDA: Device: 4 GeForce GTX 1070, 8192 MB M0 CUDA: Device: 4 Thread exited with code: 46
Just got the same glitch, restarting the script worked fine. Some time ago I had kind of the same problem with Claymore and my AMD's. hint to EWBF: Setting the (-r 240) "restart by user" switch to every 4 hours solved my problem. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Thanks for the restart by user hint, didn't even know it existed till I saw your post. I've set it up on all my miners as a just in case measure. I believe I have found a solution for Thread exited with code: 46 , Thread exited with code: 77 , and Thread exited with code 30 . After hours of tinkering and sifting through logs in EVGA precision X I noticed a correlation between power % and this error. Every time it would happen on my 1060 and 1070 rigs they would be within 4% of 100%. One of the times I even saw GPU voltage at 0.000% the line before the miner crashed. I've found on both my rigs that were having this problem, setting the power % to 94% has stopped the problem and allowed me to returned to an overclocked (rather than under clocked) configuration. My 1060 is now getting me a consistent 280-300 sol/sec with these overclocked settings on an MSI 1060 3GT OC 3GB. http://i128.photobucket.com/albums/p193/dtawom/1060_zpsghnrimkv.jpg[/quote] Do you know what is the manufacter of your GPU's memory?
|
|
|
|
Yamoto
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 22, 2018, 05:41:05 PM |
|
7 x 1060 3 x 1050Ti
device 8 & 9 not started
device manager found them
biostar 250 win10
any advice ?
|
|
|
|
JaredKaragen
Legendary
Offline
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 22, 2018, 11:51:05 PM |
|
7 x 1060 3 x 1050Ti
device 8 & 9 not started
device manager found them
biostar 250 win10
any advice ?
found them and started them? or code42?
|
|
|
|
Vispilio
Legendary
Online
Activity: 2114
Merit: 1656
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 23, 2018, 12:21:46 AM |
|
with the recent difficulty spike on ZCASH, to keep stability under check, you might need to lower power percentage, especially when using this miner on higher end cards like 1080 TI
|
|
|
|
Yesterdam
Newbie
Offline
Activity: 59
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 23, 2018, 08:37:33 AM |
|
with the recent difficulty spike on ZCASH, to keep stability under check, you might need to lower power percentage, especially when using this miner on higher end cards like 1080 TI
Why would the difficulty rise affect the power usage?
|
|
|
|
crypper
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 239
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 23, 2018, 08:59:17 AM |
|
with the recent difficulty spike on ZCASH, to keep stability under check, you might need to lower power percentage, especially when using this miner on higher end cards like 1080 TI
This is the most ridiculous statement I've ever seen on bitcointalk
|
|
|
|
Vispilio
Legendary
Online
Activity: 2114
Merit: 1656
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 23, 2018, 03:14:29 PM |
|
with the recent difficulty spike on ZCASH, to keep stability under check, you might need to lower power percentage, especially when using this miner on higher end cards like 1080 TI
This is the most ridiculous statement I've ever seen on bitcointalk why would you comment without knowing anything about mining ?.. CUDA miners are known to crash more frequently and exhibit power spikes when there is an overload in the network. Unless you have designed one of the top 10 mining pools, or have written the miner code yourself, or have developed the ZCASH algorithm, the proper reaction from your side to this statement should be modest skepticism at best, but no I know it's so much easier to be a clueless weirdo...
|
|
|
|
Bimmber
Newbie
Offline
Activity: 210
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 23, 2018, 03:21:27 PM |
|
Vispilio, I`m using ethos and DSTM miner and my rig crashes on regular bases between 1 and 3 hours of running. It could be due to your mentioned spikes. But what is the solution then ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
|
|
|
Vispilio
Legendary
Online
Activity: 2114
Merit: 1656
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 23, 2018, 03:34:55 PM Last edit: February 23, 2018, 03:50:28 PM by Vispilio |
|
Vispilio, I`m using ethos and DSTM miner and my rig crashes on regular bases between 1 and 3 hours of running. It could be due to your mentioned spikes. But what is the solution then ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) I had to lower my power consumption to 80 %, from 88 % previously. Even though electricity costs are not a big problem in my location and I have enough power on the Titanium rated PSU's, but still was encountering too many crashes recently... Also now I'm convinced 6 * 1080 TI systems are much more stable than 7 or 8 or above, no matter what they tell you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) , there is also a small effect from 220Voltage lines in Europe where outside of industrial zones the 220V feed might falter momentarily during the day, causing most PSU's to reboot when running close to capacity... We tested it over 100s of rig configurations, and while not the most cost effective set up, the most stable is 6 GPU / rig, for Nvidias running Cuda miners.
|
|
|
|
crypper
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 239
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 23, 2018, 03:44:53 PM |
|
CUDA miners are known to crash more frequently and exhibit power spikes when there is an overload in the network.
Proof? but no I know it's so much easier to be a clueless weirdo.
I bet you do. Difficulty of your shares is determined by the pool and has nothing to do with "overload in the network". Also, which network? Cheers
|
|
|
|
rulcherkizovo
Newbie
Offline
Activity: 6
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 23, 2018, 08:32:08 PM |
|
Please tell me how can I see which block are online this miner?
|
|
|
|
cdh76
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 24, 2018, 03:09:48 AM |
|
Hey I have some questions..new to the game. So I see people listing commands like --log & --pec, etc. So I'm guessing people launch their miner from the .bat file? However when I see how to create a log file or how to launch the api it seems I have to use the miner.exe so that the config file is then used instead of the bat file, correct?
So what's the norm here? Is the bat file being used when I use the miner.exe file or no?
I've always used the bat file and I would like to do so but I cannot get it to create a log file.
Edit: Got api working. Just need to get a log file created and actually log some data!
|
|
|
|
k08r4
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2018, 04:47:33 PM |
|
Regards to all, I'm new to this, so I would ask you for some guidance. How do I install the program to make my logo fail? And can I install a notification to arrive when the program is shut down?
P.S. I use the 1070 Ti Zotac graphics card, and I happen to turn off the program and turn it on again, but I do not know for any reason Thanks for help
|
|
|
|
crypper
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 239
Merit: 12
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2018, 05:25:23 PM |
|
Regards to all, I'm new to this, so I would ask you for some guidance. How do I install the program to make my logo fail? And can I install a notification to arrive when the program is shut down?
P.S. I use the 1070 Ti Zotac graphics card, and I happen to turn off the program and turn it on again, but I do not know for any reason Thanks for help
With 1070 Ti Zotac you have to fly my dress and dragon feast the mountain.
|
|
|
|
scwarze
Newbie
Offline
Activity: 22
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 26, 2018, 10:48:50 PM |
|
With last software version i have on 1050TI palit 4gb card 99sol/s. and perfcap vrel, where is problem ? other card have perfcap power. same 1050ti. (160sol/s)
All cards with stock parameters. *(without overclock)
|
|
|
|
TrophyMiner
Newbie
Offline
Activity: 29
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2018, 10:50:11 AM |
|
Vispilio, I`m using ethos and DSTM miner and my rig crashes on regular bases between 1 and 3 hours of running. It could be due to your mentioned spikes. But what is the solution then ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) I had to lower my power consumption to 80 %, from 88 % previously. Even though electricity costs are not a big problem in my location and I have enough power on the Titanium rated PSU's, but still was encountering too many crashes recently... Also now I'm convinced 6 * 1080 TI systems are much more stable than 7 or 8 or above, no matter what they tell you ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) , there is also a small effect from 220Voltage lines in Europe where outside of industrial zones the 220V feed might falter momentarily during the day, causing most PSU's to reboot when running close to capacity... We tested it over 100s of rig configurations, and while not the most cost effective set up, the most stable is 6 GPU / rig, for Nvidias running Cuda miners. how does power effect the crashing? what i read about power it will only use what it needs ( correct me if iam wrong) example: if you set the power to 120 and the gpu needs only 80 then it will only use 80 and not 120 i have noticed that zcash miner and dtsm miner are not stable once u OC above 300 mem and 70 clock on my side ( using 6X 1070s amp ex) they always crash at some point so i have to lower the OC to 50 and 250 to run stable for 24h i have tested bminer with a higher oc settings than both zec and dstm (70clock and 500mem ) and it never crashed once in 50hours but i dont fully trust bminer yet because it doesnt show me correct hash rate although its a super stable app so i think the power has nothing to do with the crash but the total OC you have done cant be handled by the software if another software can handle the OC then the software that crashes has a fault imo but if you can explain more than i will be more than happy to learn ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) (new to this and learning)
|
|
|
|
zabzab
Newbie
Offline
Activity: 25
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 01, 2018, 03:11:51 PM |
|
You guys tried https://www.forgetop.com/ for equihash mining !? Really nice pool, only just found it and very stable/fair which is always a plus these days ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
lutsifer
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 204
Merit: 10
Mining is our Passion! Join us!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2018, 12:19:54 AM |
|
You guys tried https://www.forgetop.com/ for equihash mining !? Really nice pool, only just found it and very stable/fair which is always a plus these days ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) First block reward already sent https://zclexplorer.forgetop.com/tx/bc152f41ef2edf25fc2976347bac6711085296caa20dd10b3f11d8d0c1f29367Also this is a new block explorer gift for the community, since it seems every one abandoned the old ones.. (it is still synchronizing slowly but it will catch up!) So in short - you are welcome to the new ZCL pool https://forgetop.com
If you hurry up you will be able to get the 0% mining fee , there is still some days left ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Happy mining to all!
|
| Europe / Asia | Profitable Coins | Huge Servers | Monitoring Service | Adjustable Pool Settings | 24/7 Anon Mining |
|
|
|
zabzab
Newbie
Offline
Activity: 25
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2018, 11:04:12 AM |
|
wow that's cool! Thank's so much for your hardwork and time.
|
|
|
|
|