UnclWish
|
|
January 25, 2018, 01:19:23 AM |
|
I did just update to the one updated today. It just crashed again but this time I noticed some weird behavior, like Chrome would open after a 30s delay or web pages would also take a long time to open/connect. I then stopped the miner and was going to reboot, but when I hit the X to close GGS, it blue screened...again. This time it gave a different DXG file as the culprit so it at least doesn't like DirectX 12. Something else is going on so I might just do a windows repair or do a complete reinstall. I've had too many crashes and now weird behavior so I think it needs a rebuild.
I didn't think that DirectX was involved in mining. I'd be happy to learn otherwise.
It's something with your windows. DirectX have nothing with mining. Programs for mining use different way to use cards, through OpenCL.
|
|
|
|
rusman2
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 25, 2018, 03:43:28 AM |
|
It's something with your windows. DirectX have nothing with mining. Programs for mining use different way to use cards, through OpenCL.
I'm running NSGminer, for the last 2.5 hours and no issues. Will continue to let it run and see.
|
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
January 25, 2018, 05:15:09 AM |
|
8h runtime now -stable so far, no restarts -cpu usage becomes high(60%) maybe so high for me because of weak cpu? -devfee switching much better
+wish for next version, please make it possible to disable charts, i have the feeling they eat to much resources
|
|
|
|
OhMyHolyToken
Jr. Member
Offline
Activity: 98
Merit: 2
|
|
January 25, 2018, 05:31:28 AM |
|
55-60% CPU usage of G4400.
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 25, 2018, 07:03:05 AM |
|
8h runtime now -stable so far, no restarts -cpu usage becomes high(60%) maybe so high for me because of weak cpu? -devfee switching much better
+wish for next version, please make it possible to disable charts, i have the feeling they eat to much resources
+1 and to disable profitability Hmm... These reports of high GPU usage really puzzle me... One of my rigs has Pentium G4400 with 4GB of memory, and CPU usage is around 13% or so. It only has 3 GPU's at the moment, though. Which algorithm are you guys running, and how many GPU's are there on your rigs?
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
January 25, 2018, 07:22:57 AM |
|
have g3900 celeron, cryyptonight 12 gpus(amd rx580 + vegA)
edit: cpu usage becomes high over time, and miner responds very laggy, but stable as hell
|
|
|
|
UnclWish
|
|
January 25, 2018, 07:37:31 AM Last edit: January 25, 2018, 07:55:24 AM by UnclWish |
|
8h runtime now -stable so far, no restarts -cpu usage becomes high(60%) maybe so high for me because of weak cpu? -devfee switching much better
+wish for next version, please make it possible to disable charts, i have the feeling they eat to much resources
+1 and to disable profitability Hmm... These reports of high GPU usage really puzzle me... One of my rigs has Pentium G4400 with 4GB of memory, and CPU usage is around 13% or so. It only has 3 GPU's at the moment, though. Which algorithm are you guys running, and how many GPU's are there on your rigs? CPU usage grows with time. At start it's very low as it must be - about 1-2%. But after 30 min CPU usage allready 2 times higher - 2-4%. After several hours even on 8 cores CPU it uses more than 1 core (16-20%+) and continue to grow... I have FX 8320 3,5GHZ, 3 GPU's and 12Gb RAM. Mining cryptonight.
|
|
|
|
duyquang06
Newbie
Offline
Activity: 154
Merit: 0
|
|
January 25, 2018, 07:49:19 AM |
|
Guys, he work really hard and update almost daily.
+1 Great Dev
|
|
|
|
rusman2
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 25, 2018, 08:11:13 AM |
|
Still running nsgminer with no issues. nsgminer v0.9.4 - NeoScrypt : [2018-01-24 19:10:10] - [ 0 days 06:57:46]
I do not know why GGS would cause a blue screen but i have been running another miner for many hours now, also running OC/undervolt and mem timing changes, which I did not have in place when running GGS.
|
|
|
|
preda
|
|
January 25, 2018, 08:25:31 AM |
|
I'm running with 6 570 4gb itx pulse memory elpida windows 10 drivers 17.1 intensity 112 bios made by me
i have 4 of these cards and i get 880h each so 3500h cryptonight as well with very low power consumption they get 29mh on eth too very good cards!!! just copied 1500 one click and msi afterburner 1150/1970 drivers 1st blockchain august
|
|
|
|
UnclWish
|
|
January 25, 2018, 08:56:10 AM |
|
I'm running with 6 570 4gb itx pulse memory elpida windows 10 drivers 17.1 intensity 112 bios made by me
i have 4 of these cards and i get 880h each so 3500h cryptonight as well with very low power consumption they get 29mh on eth too very good cards!!! just copied 1500 one click and msi afterburner 1150/1970 drivers 1st blockchain august Don't you tried memory clock over 2000? Maybe with 1750 one click it can work on 2100+ and give 900+ speed...
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 25, 2018, 10:55:19 AM |
|
Well, sorry guys, I just added another graph! I did review the related codes and these graphs should not increase CPU usage that much with later versions. It takes a non-trivial amount of work to make those graphs optional, so I would like to see how the next version pans out first.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
January 25, 2018, 11:48:13 AM |
|
whatever you do, please dont change anything u did with 1.27 to increase stability...now its perfect
|
|
|
|
pokegovn44
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 25, 2018, 12:20:29 PM |
|
just try your program today on my rig. very stable so far, 10hrs and counting...
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
January 25, 2018, 01:05:19 PM |
|
Hey Zawawa, still not in the pipe to support cmdline for your miner ? i would love to test it out, but if it's not scriptable, i can't use it Thanks I just came up with an idea. I could just make the current version scriptable and call it a command-line version! It should be pretty straight forward to implement... Would be awesome sir, keep up the good work
|
|
|
|
agrld
Newbie
Offline
Activity: 15
Merit: 0
|
|
January 25, 2018, 02:10:31 PM |
|
very stable hashrate on latest version (nanopool 6hours average before 1.2.8 2900-3200 h/s. On 1.2.8 3300 h/s ) No crash or blue screen But has high cpu usage (50%), g3260 + 1 rx480, 1 rx470, 3 rx460 with amd blockchain http://prntscr.com/i5fpob
|
|
|
|
ChaseAProfit
Newbie
Offline
Activity: 11
Merit: 0
|
|
January 25, 2018, 05:12:01 PM |
|
Hey Zawawa, still not in the pipe to support cmdline for your miner ? i would love to test it out, but if it's not scriptable, i can't use it Thanks I just came up with an idea. I could just make the current version scriptable and call it a command-line version! It should be pretty straight forward to implement... Would be awesome sir, keep up the good work I would also like to see a command line version!
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 25, 2018, 10:19:05 PM |
|
Hey Zawawa, still not in the pipe to support cmdline for your miner ? i would love to test it out, but if it's not scriptable, i can't use it Thanks I just came up with an idea. I could just make the current version scriptable and call it a command-line version! It should be pretty straight forward to implement... Would be awesome sir, keep up the good work I would also like to see a command line version! This wasn't so bad after all...
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
npittas
Newbie
Offline
Activity: 29
Merit: 0
|
|
January 25, 2018, 11:11:20 PM |
|
Any news on any monitoring API? Its the only reason I am not currently use your wonderful miner. I would love to contribute to your dev fee but I am running 4 remote machines and without a monitor app, I cannot rely on pool's emails, if a rig works or not.
Sincerely Nick
|
|
|
|
rusman2
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 26, 2018, 04:39:58 AM |
|
Still running nsgminer with no issues. nsgminer v0.9.4 - NeoScrypt : [2018-01-24 19:10:10] - [ 0 days 06:57:46]
I do not know why GGS would cause a blue screen but i have been running another miner for many hours now, also running OC/undervolt and mem timing changes, which I did not have in place when running GGS. I just wanted to report back that nsgminer is still up and running. nsgminer v0.9.4 - NeoScrypt : [2018-01-24 19:10:10] - [ 1 day 03:29:27]
I guess it could be something in my config but it is being triggered by GGS for some reason. Hashrate on this seems equal as far as I can tell. I might try it again in a few more version updates.
|
|
|
|
|