▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[buffycs]

Good day!
I am new to the hole system and was attempting to configure my client to mine zpool. I clearly did something wrong and I am not getting a website error.

Error 1006 Ray ID: 3a1ff5cfe02d3476 • 2017-09-21 21:01:31 UTC
Access denied
What happened?
The owner of this website (zpool.ca) has banned your IP address.

I can PM you my address (let me know if I can) and if you could let me know what it was I did, I can avoid doing it again.

Thanks.

[CryptoCrane]

Hey guys,

I don't know if you guys care much about the AntMiner D3, but we compared mining X11 through ZPool.com, NiceHash.com, and ProHashing.com with the winner coming out to be ZPool. We have no affiliation with ZPool and just picked it because we saw another independent review claiming it was one of the best. Here's the video with the results if anyone's interested:

[SickTricky]

Newbie questions here:

I will have an L3+ and D3 in soon and I'd like to know the accurate URL, Username and Password combo for the L3+ and D3 for using zpool

I am guessing:

L3+
URL: stratum+tcp://scrypt.mine.zpool.ca:3433
Username: My Bitcoin Address
Password: c=BTC

D3
URL: stratum+tcp://x11.mine.zpool.ca:3533
Username: My Bitcoin Address
Password: c=BTC

Also...  In which particular case and why will I need to set a custom difficulty?  How would I know that instead of the above, I would to specify difficulty, and what would the difficulty be for an L3+ and D3?  Thanks.

-o stratum+tcp://<algo>.mine.zpool.ca:3433 -u wallet_adress -p d=64

Hi I cannot seem to get my d3 to mine Exchange to BTC
it shows BCH but I want BTC. I dont care about the BCH

also how can you set the miner to dynamic difficulty ?

[Mr_Snipes]

I mined without the password-field set to c=BTC.
Now i see nothing appearing when i mine with the correct params.
How can i fix this ? The start of my wallet-id is  18iPjDous
Also i saw some cloudflare offline-errors a minute ago.

[deesnark]

https://drive.google.com/open?id=0B7ipDodkEGsITG51RlIwUzBza2c
Hello!
Very often, and regardless of the algorithm of work, coins with the status of "Competed" began to appear. This is normal?

[crackfoo]

https://drive.google.com/open?id=0B7ipDodkEGsITG51RlIwUzBza2c
Hello!
Very often, and regardless of the algorithm of work, coins with the status of "Competed" began to appear. This is normal?

it means it's done it's whole process. Thought I'd make it a more definitive than what it used to say cause so many people keep asking what cleared means......

[crackfoo]

Newbie questions here:

I will have an L3+ and D3 in soon and I'd like to know the accurate URL, Username and Password combo for the L3+ and D3 for using zpool

I am guessing:

L3+
URL: stratum+tcp://scrypt.mine.zpool.ca:3433
Username: My Bitcoin Address
Password: c=BTC

D3
URL: stratum+tcp://x11.mine.zpool.ca:3533
Username: My Bitcoin Address
Password: c=BTC

Also...  In which particular case and why will I need to set a custom difficulty?  How would I know that instead of the above, I would to specify difficulty, and what would the difficulty be for an L3+ and D3?  Thanks.

-o stratum+tcp://<algo>.mine.zpool.ca:3433 -u wallet_adress -p d=64

Hi I cannot seem to get my d3 to mine Exchange to BTC
it shows BCH but I want BTC. I dont care about the BCH

also how can you set the miner to dynamic difficulty ?

If you don't care got BCH then you need to give me your wallet address so I can fix it before you've mined too much. Otherwise, you'll end up getting paid in BCH.

For dynamic diff.... don't supply the d= option.

[crackfoo]

Hey guys,

I don't know if you guys care much about the AntMiner D3, but we compared mining X11 through ZPool.com, NiceHash.com, and ProHashing.com with the winner coming out to be ZPool. We have no affiliation with ZPool and just picked it because we saw another independent review claiming it was one of the best. Here's the video with the results if anyone's interested:

that's awesome, thanks for sharing this.

Cheers!

[crackfoo]

Good day!
I am new to the hole system and was attempting to configure my client to mine zpool. I clearly did something wrong and I am not getting a website error.

Error 1006 Ray ID: 3a1ff5cfe02d3476 • 2017-09-21 21:01:31 UTC
Access denied
What happened?
The owner of this website (zpool.ca) has banned your IP address.

I can PM you my address (let me know if I can) and if you could let me know what it was I did, I can avoid doing it again.

Thanks.

it can happen if the logs pickup some bad requests. PM you're ip and I can check

[Mr_Snipes]

mining x11 is not working for me on zpool.
I have added an address i used before and the stratum
stratum+tcp://x11.mine.zpool.ca:3433
Nothing comes up even after waiting a while, no stats or anything.
I can see that my miner found more than 100 blocks during my test so it is def connecting.

[crackfoo]

mining x11 is not working for me on zpool.
I have added an address i used before and the stratum
stratum+tcp://x11.mine.zpool.ca:3433
Nothing comes up even after waiting a while, no stats or anything.
I can see that my miner found more than 100 blocks during my test so it is def connecting.

port is wrong, 3533

Thanks

[boliveira]

What about BitPlanet? Can you remove it? Waiting 3 days for exchange and nothing.. Mining AUR skein algo

[SickTricky]

Newbie questions here:

I will have an L3+ and D3 in soon and I'd like to know the accurate URL, Username and Password combo for the L3+ and D3 for using zpool

I am guessing:

L3+
URL: stratum+tcp://scrypt.mine.zpool.ca:3433
Username: My Bitcoin Address
Password: c=BTC

D3
URL: stratum+tcp://x11.mine.zpool.ca:3533
Username: My Bitcoin Address
Password: c=BTC

Also...  In which particular case and why will I need to set a custom difficulty?  How would I know that instead of the above, I would to specify difficulty, and what would the difficulty be for an L3+ and D3?  Thanks.

-o stratum+tcp://<algo>.mine.zpool.ca:3433 -u wallet_adress -p d=64

Hi I cannot seem to get my d3 to mine Exchange to BTC
it shows BCH but I want BTC. I dont care about the BCH

also how can you set the miner to dynamic difficulty ?

If you don't care got BCH then you need to give me your wallet address so I can fix it before you've mined too much. Otherwise, you'll end up getting paid in BCH.

For dynamic diff.... don't supply the d= option.

1DHcCtMBDS85qNS2EMRofeBEGDuRjD2W8m

perfect. I switched pools so its not a biggie. its just the constant testing that it kept mining BCH
Thanks A lot

[crackfoo]

Newbie questions here:

I will have an L3+ and D3 in soon and I'd like to know the accurate URL, Username and Password combo for the L3+ and D3 for using zpool

I am guessing:

L3+
URL: stratum+tcp://scrypt.mine.zpool.ca:3433
Username: My Bitcoin Address
Password: c=BTC

D3
URL: stratum+tcp://x11.mine.zpool.ca:3533
Username: My Bitcoin Address
Password: c=BTC

Also...  In which particular case and why will I need to set a custom difficulty?  How would I know that instead of the above, I would to specify difficulty, and what would the difficulty be for an L3+ and D3?  Thanks.

-o stratum+tcp://<algo>.mine.zpool.ca:3433 -u wallet_adress -p d=64

Hi I cannot seem to get my d3 to mine Exchange to BTC
it shows BCH but I want BTC. I dont care about the BCH

also how can you set the miner to dynamic difficulty ?

If you don't care got BCH then you need to give me your wallet address so I can fix it before you've mined too much. Otherwise, you'll end up getting paid in BCH.

For dynamic diff.... don't supply the d= option.

1DHcCtMBDS85qNS2EMRofeBEGDuRjD2W8m

perfect. I switched pools so its not a biggie. its just the constant testing that it kept mining BCH
Thanks A lot

changed to BTC.

[crackfoo]

What about BitPlanet? Can you remove it? Waiting 3 days for exchange and nothing.. Mining AUR skein algo

can't remove it, but it's fixed.

Thanks

[insaniak]

How long does it take for mining a coin to show up under earnings? Ive been mining skunhash for 23m @ 175 mh/s and its not shown up yet. Its showing neoscrypt that I was mining before that under earnings.

[alditrav]

scrypt mining down ?

[Mr_Snipes]

scrypt mining down ?

same here. X11 still works.

the hashrate has gone to 0 in the stats as well.

[Marx74]

@crackfoo Hi, I don't know if you've been contacted about it yet but chaincoin did a fork yesterday and for it to work properly the mining pool wallets need to be upgraded to at least version 0.9.3.0, so it would be great if you could look into that. I read that suprnova had some issues compiling the wallet which appears to have been because of libevent-dev not being mentioned as a dependency in some early tutorials. So if you run into any issues it might be because of this dependency missing.

Thanks

[crackfoo]

@crackfoo Hi, I don't know if you've been contacted about it yet but ChainCoin did a fork yesterday and for it to work properly the mining pool wallets need to be upgraded to at least version 0.9.3.0, so it would be great if you could look into that. I read that suprnova had some issues compiling the wallet which appears to have been because of libevent-dev not being mentioned as a dependency in some early tutorials. So if you run into any issues it might be because of this dependency missing.

Thanks

I've updated the wallet already to 0.9.3.1, didn't have any issues compiling..