▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[djmuk2]

Hi Crackfoo

Can you check LTC again - over 24h since we got a block and it has killed scrypt profitability again!  I really think we should drop it from the pool, it does give a nice uptick on returns when we do get a block but they take soooo long...

Thanks

[JaredKaragen]

Hi Crackfoo

Can you check LTC again - over 24h since we got a block and it has killed scrypt profitability again!  I really think we should drop it from the pool, it does give a nice uptick on returns when we do get a block but they take soooo long...

Thanks

the problem is you can't base short term profitability on high diff coins when pool TTF is rather high.....   Its a tough decision to make for sure...

Maybe on coins like LTC, add a port specifically for that coin?  Might be an interesting idea... but i fear it would not get enough users if configured that way.

[djmuk2]

There are enough dedicated LTC pools that I doubt we would get enough Hashrate to make it work.

I think the long block times cause several issues, we either end up with a large number of miners 'stuck' on LTC until we get a block or miners drop in and out and we never get a block, plus it only takes a couple of invalid blocks to drop the returns right off, and (as you say) the pool works on short term profitability which only really works if we get a block in the same sort of timescale as the profitability is worked out over.

Hi Crackfoo

Can you check LTC again - over 24h since we got a block and it has killed scrypt profitability again!  I really think we should drop it from the pool, it does give a nice uptick on returns when we do get a block but they take soooo long...

Thanks

the problem is you can't base short term profitability on high diff coins when pool TTF is rather high.....   Its a tough decision to make for sure...

Maybe on coins like LTC, add a port specifically for that coin?  Might be an interesting idea... but i fear it would not get enough users if configured that way.

[arikatamo]

What's wrong with "keccak"? Miner tel that hash 700mh, site = 40Mh.

[crackfoo]

What's wrong with "keccak"? Miner tel that hash 700mh, site = 40Mh.

I just changed it to match the other blake/sha algos with BTC per GH instead of MH.

https://github.com/tpruvot/yiimp/commit/6b6866048e2e5a1ab0fb373e0c65da296bb0556b

[CIBERUS]

What's wrong with "keccak"? Miner tel that hash 700mh, site = 40Mh.

I just changed it to match the other blake/sha algos with BTC per GH instead of MH.

https://github.com/tpruvot/yiimp/commit/6b6866048e2e5a1ab0fb373e0c65da296bb0556b

dude i think something wrong with the calculation with SHA3 on awesome miner, 1GHz daily $1,8xx ish... hahaha

[kakomanda]

What's wrong with "keccak"? Miner tel that hash 700mh, site = 40Mh.

I just changed it to match the other blake/sha algos with BTC per GH instead of MH.

https://github.com/tpruvot/yiimp/commit/6b6866048e2e5a1ab0fb373e0c65da296bb0556b

dude i think something wrong with the calculation with SHA3 on awesome miner, 1GHz daily $1,8xx ish... hahaha

Yeah. Im not sure i let it run that way or block SHA3 from the algos list.

[Abrigato]

Hi guys,

anyone can help with setting Antminer D3 with multipool?

Thanks in advance!

[crackfoo]

Hi guys,

anyone can help with setting Antminer D3 with multipool?

Thanks in advance!

settings on main page, what more do you need?

[guytechie]

What's wrong with "keccak"? Miner tel that hash 700mh, site = 40Mh.

Same.  Miner hashing at 3.8 GH, but site says 9.2 MH.

[gruntbull]

What's wrong with "keccak"? Miner tel that hash 700mh, site = 40Mh.

Same.  Miner hashing at 3.8 GH, but site says 9.2 MH.

have a few machines pointed at Keccak (MAX) and no joy - I have two with 5.8GH and a test rig with 1.1GH all reporting= 22MH, 17MH, 7.3MH respectively. Looking in the mining window two are 5.8GH (give or take a few MH) and the test rig is 1.1GH in Alexis and 958MH in Tpruvot

To add more clarity 2 rigs of 6 1080ti both report on miner (Tpruvot) 5,800 MH - or 5.8GH. On zpool.ca the report (with no rejects) is 22MH for one and 17MH for the other after 45mins; which in my experience with zpool usually you get much closer to your full hash rate reported in that amount of time.

Mining Lyra2v2 the reported on miner and on site are +/- 2% from each other.

[DS-M]

Hello Zpool lovers...,     

I contacted Mining Rig Rentals, to see if they could fix the continuesly swapping of Zpool.ca to otherpools.

Zpool still(?) sometimes times out, or takes longer than normal to establish connection to the servers of MRR, which results in the backup-pools kicking in. When switching it back, it jumps to backup pool again, with an interval of 1 to 4 hours, but we cant be sure it keeps mining at Zpool.

Directly connecting my miners (S9's, D3 and L3) gives some better results, for 1 to 2 hours...then all miners are gone from the overview.
Rebooting miners, fixes it for say 1 hour.

Testing it (MRR) with Zpool, from newly created servers where i sent my shares to doesnt solv it. (eu-de01, eu-de02, eu-01, and even USA)

Just like last night, i set all miners to Zpool, to come back 45 mins later, so find them mining at mining-dutch.nl . Since that site, and some others do not have this behaviour . I checked our systems last night, and did not find any strange behaviour.

So what more i can try to improve the connections towards Zpool.ca? Been mining there long time, but since those nicehash refugee's came, everything just works not so nice anymore :-(

Regards,

DS-M

[guytechie]

Couple questions:

1.  What is a good difficulty setting (d=xxx) for equihash at 300 sols/s?  I'm currently finding a share every 5 to 8 minutes and the pool is not auto-adjusting to a lower difficulty.

2. When you disable m7m, can you disable it in a way where miners would automatically switch to a different algo?  Mine are still trying to connect to the m7m stratum even though I have them configured to auto-switch xevan and yescrypt.  I thought before it wasn't possible, but other yiimp pools works fine (currently moved my CPU miners to hashrefinery temporarily until zpool can implement this feature).  When they removed m7m, my miners actually moved to another algo!

[Fromage]

Whoa Zpool.....woke up this morning to see keccak at 3,000usd and my rigs were pumping at your site but with no diff adjusts happening...

I verified... when I moved all keccak mining from Sniffdog to another pool (with the diff's working) and noticed even the numbers are different on profit! ie: It's still reading your api but mining elsewhere and profit is much lower

please fix soon!

[neosante]

what wrong with hasrate in qubit algo. I have more than 2000mhs. but your system show only 900mhs ?

[gruntbull]

Whoa Zpool.....woke up this morning to see keccak at 3,000usd and my rigs were pumping at your site but with no diff adjusts happening...

I verified... when I moved all keccak mining from Sniffdog to another pool (with the diff's working) and noticed even the numbers are different on profit! ie: It's still reading your api but mining elsewhere and profit is much lower

please fix soon!

Fromage - great application you have there - thanks! my statements come from use of your application on my test rig, and pointing my larger rigs there using linux/ccminer concurs with your results (stated above)

[Fromage]

Whoa Zpool.....woke up this morning to see keccak at 3,000usd and my rigs were pumping at your site but with no diff adjusts happening...

I verified... when I moved all keccak mining from Sniffdog to another pool (with the diff's working) and noticed even the numbers are different on profit! ie: It's still reading your api but mining elsewhere and profit is much lower

please fix soon!

Fromage - great application you have there - thanks! my statements come from use of your application on my test rig, and pointing my larger rigs there using linux/ccminer concurs with your results (stated above)

Thank you and Happy Holidays! I'm still waiting on EWBF 0.3.4c to enter the ring. Hopefully soon!

Removed Keccak from my test rig as well

Wishing you all the best gruntbull!

[guytechie]

No need to remove keccak.

Go to the Pools folder and edit the zpool.ps1 (and zpool24hr.ps1) file(s).

This works for NemosMiner and Sniffdogminer (and others based off the same script).

Find the line "switch($Zpool_Algorithm)" and add the line " "keccak"{$Divisor *= 1000} ".

See example:

Code:

switch($Zpool_Algorithm)
    {
        "equihash"{$Divisor /= 1000}
        "blake2s"{$Divisor *= 1000}
        "blakecoin"{$Divisor *= 1000}
        "decred"{$Divisor *= 1000}
        "keccak"{$Divisor *= 1000}
    }

[Fromage]

No need to remove keccak.

Go to the Pools folder and edit the zpool.ps1 (and zpool24hr.ps1) file(s).

This works for NemosMiner and Sniffdogminer (and others based off the same script).

Find the line "switch($Zpool_Algorithm)" and add the line " "keccak"{$Divisor *= 1000} ".

See example:

Code:

switch($Zpool_Algorithm)
    {
        "equihash"{$Divisor /= 1000}
        "blake2s"{$Divisor *= 1000}
        "blakecoin"{$Divisor *= 1000}
        "decred"{$Divisor *= 1000}
        "keccak"{$Divisor *= 1000}
    }

No I took it off because that's not the algo's I have been watching lately

Also the stratum diff is out as well...but I'll keep on adding them to zpool's


        "equihash"{$Divisor /= 1000}
        "blake2s"{$Divisor *= 1000}
       "blakecoin"{$Divisor *= 1000}
        "decred"{$Divisor *= 1000}
       "x11"{$Divisor *= 100}
        "keccak"{$Divisor *= 1000}

[gruntbull]

Whoa Zpool.....woke up this morning to see keccak at 3,000usd and my rigs were pumping at your site but with no diff adjusts happening...

I verified... when I moved all keccak mining from Sniffdog to another pool (with the diff's working) and noticed even the numbers are different on profit! ie: It's still reading your api but mining elsewhere and profit is much lower

please fix soon!

Fromage - great application you have there - thanks! my statements come from use of your application on my test rig, and pointing my larger rigs there using linux/ccminer concurs with your results (stated above)

Thank you and Happy Holidays! I'm still waiting on EWBF 0.3.4c to enter the ring. Hopefully soon!

Removed Keccak from my test rig as well

Wishing you all the best gruntbull!

Thank you and Merry Christmas to you as well! Have a great week!