vg54dett
|
|
May 09, 2017, 11:02:51 AM |
|
Anyone ever faced GPUs dying due to risers ?
Since a month, I had 3 GPUs died on two rigs. The two rigs are identicals. I changed the PSUs and the GPU's after 2 death , and the only remaining parts were Mobos and risers. And then the 3rd died. So I think the risers could be the cause.
These are risers with PCI-e 6 pins power. (1 month old) What is weird is everything is working perfectly, and some time I notice the rig is down, and after reboot I see one GPU not working (not recognised , no fan spin) ...
lower clocks you dual mine if I recall stop it on 1 rig and see if the risers last. the weird part of the story is that these 2 rigs are not dual mining. And the clocks are not very high.. 1100/1880 and -100mv (for rx470s 4gb) This is god settings, never got any trouble on others RIGs. Temps and fans are low. The last GPU that died was 1 day old ! There is something really strange with the 2 rigs.. I have to find it, as it is a very expensive trouble.
|
|
|
|
bentcrypto
|
|
May 09, 2017, 12:05:31 PM |
|
Guys any suggestions on how to get more efficiency out of this 1080TI 11gb on EWBF?
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
May 09, 2017, 12:35:39 PM |
|
Guys any suggestions on how to get more efficiency out of this 1080TI 11gb on EWBF?
<snipped> Rejects are also high I think -- is this normal?
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
May 09, 2017, 12:38:36 PM |
|
Anyone ever faced GPUs dying due to risers ?
Since a month, I had 3 GPUs died on two rigs. The two rigs are identicals. I changed the PSUs and the GPU's after 2 death , and the only remaining parts were Mobos and risers. And then the 3rd died. So I think the risers could be the cause.
These are risers with PCI-e 6 pins power. (1 month old) What is weird is everything is working perfectly, and some time I notice the rig is down, and after reboot I see one GPU not working (not recognised , no fan spin) ...
lower clocks you dual mine if I recall stop it on 1 rig and see if the risers last. the weird part of the story is that these 2 rigs are not dual mining. And the clocks are not very high.. 1100/1880 and -100mv (for rx470s 4gb) This is god settings, never got any trouble on others RIGs. Temps and fans are low. The last GPU that died was 1 day old ! There is something really strange with the 2 rigs.. I have to find it, as it is a very expensive trouble. 2 questions a. do you use custom roms for your 470? b. what motherboard and using powered risers?
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
bentcrypto
|
|
May 09, 2017, 12:43:05 PM |
|
Guys any suggestions on how to get more efficiency out of this 1080TI 11gb on EWBF?
<snipped> Rejects are also high I think -- is this normal? No idea buddy...I am a complete noob I have had problems with my internet connection the last few days though.
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
May 09, 2017, 12:59:23 PM |
|
just ordered this - I hope to play with this for ZEC/EWBF on Windows and fullzero's linux build. https://www.newegg.com/Product/Product.aspx?Item=N82E16814500415ZOTAC GeForce GTX 1080 Ti FE DirectX 12 ZT-P10810A-10P 11GB 352-Bit GDDR5X PCI Express 3.0 HDCP Ready SLI Support Video Cards Pick For Honor or Ghost Recon: Wildlands game w/purchase, limited offer
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4298
Merit: 8768
'The right to privacy matters'
|
|
May 09, 2017, 01:48:05 PM |
|
Guys any suggestions on how to get more efficiency out of this 1080TI 11gb on EWBF? drop power setting to 67 not 93 power 67% core + 100 or stay at 130 ram + 300 or stay at 250 fan 75% you are are 72C because you have power at 93% this is the single worse setting you have
|
|
|
|
bentcrypto
|
|
May 09, 2017, 02:04:15 PM |
|
Thanks Phil...much better!! Was able to make it much quieter also.
|
|
|
|
|
LoneRangir
|
|
May 09, 2017, 02:47:23 PM |
|
This is likely a R.T.F.M. moment, but how do you get the power to be reported in the miner transcript?
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4298
Merit: 8768
'The right to privacy matters'
|
|
May 09, 2017, 02:55:40 PM |
|
Cracked and sold a coin at 1700 usd This is likely a R.T.F.M. moment, but how do you get the power to be reported in the miner transcript?
for zec --pec in the start bat of ewbf for zec https://bitcointalk.org/index.php?topic=1707546.0First post
|
|
|
|
vg54dett
|
|
May 09, 2017, 03:01:36 PM |
|
Anyone ever faced GPUs dying due to risers ?
Since a month, I had 3 GPUs died on two rigs. The two rigs are identicals. I changed the PSUs and the GPU's after 2 death , and the only remaining parts were Mobos and risers. And then the 3rd died. So I think the risers could be the cause.
These are risers with PCI-e 6 pins power. (1 month old) What is weird is everything is working perfectly, and some time I notice the rig is down, and after reboot I see one GPU not working (not recognised , no fan spin) ...
lower clocks you dual mine if I recall stop it on 1 rig and see if the risers last. the weird part of the story is that these 2 rigs are not dual mining. And the clocks are not very high.. 1100/1880 and -100mv (for rx470s 4gb) This is god settings, never got any trouble on others RIGs. Temps and fans are low. The last GPU that died was 1 day old ! There is something really strange with the 2 rigs.. I have to find it, as it is a very expensive trouble. 2 questions a. do you use custom roms for your 470? b. what motherboard and using powered risers? Yes custom roms , tested and approved on many rigs since 6 months without any trouble except the two rigs. I don't think the rom is the cause. MB is H81 pro BTC for both, and all risers are powered by PCI-e 6 pins. (much better than SATA or Molex .... theorically ... as none of my GPUs ever died with the SATA and Molex ones ...)
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4298
Merit: 8768
'The right to privacy matters'
|
|
May 09, 2017, 03:13:06 PM |
|
Anyone ever faced GPUs dying due to risers ?
Since a month, I had 3 GPUs died on two rigs. The two rigs are identicals. I changed the PSUs and the GPU's after 2 death , and the only remaining parts were Mobos and risers. And then the 3rd died. So I think the risers could be the cause.
These are risers with PCI-e 6 pins power. (1 month old) What is weird is everything is working perfectly, and some time I notice the rig is down, and after reboot I see one GPU not working (not recognised , no fan spin) ...
lower clocks you dual mine if I recall stop it on 1 rig and see if the risers last. the weird part of the story is that these 2 rigs are not dual mining. And the clocks are not very high.. 1100/1880 and -100mv (for rx470s 4gb) This is god settings, never got any trouble on others RIGs. Temps and fans are low. The last GPU that died was 1 day old ! There is something really strange with the 2 rigs.. I have to find it, as it is a very expensive trouble. 2 questions a. do you use custom roms for your 470? b. what motherboard and using powered risers? Yes custom roms , tested and approved on many rigs since 6 months without any trouble except the two rigs. I don't think the rom is the cause. MB is H81 pro BTC for both, and all risers are powered by PCI-e 6 pins. (much better than SATA or Molex .... theorically ... as none of my GPUs ever died with the SATA and Molex ones ...) my h81 had issues like yours i believe it was on power up just like you said. the mobo is in a box It killed 2 psus
|
|
|
|
cashen
|
|
May 09, 2017, 04:10:46 PM |
|
Questions about Stratum Proxy
1. I am currently running 35 GPUs on 5 machines. All dual mining at nicehash with claymore. Would I benefit from setting up a stratum proxy? 2. I have 2 L3+s, pointed at zpool and nicehash. Would I benefit from a stratum proxy?
I think the main benefit with the L3+s Proxy would being able to switch pools without using the web interface which resets the machines and is a pain.
|
|
|
|
xleejohnx
|
|
May 09, 2017, 04:40:39 PM Last edit: May 09, 2017, 10:27:09 PM by xleejohnx |
|
I cracked too and sold 1 at 1770$ edit: the amount of money going out right now for sha256 renting at nicehash makes me wanna buy a btc miner lol
|
As I see a super coin as the super highway and alt coins as taxis and trucks needed to move transactions. ~philipma1957
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4298
Merit: 8768
'The right to privacy matters'
|
|
May 10, 2017, 01:21:07 AM |
|
my guess is if you have a lot of amd a few nvidia should be okay. if you have a lot of nvidia a few rx 470/480 should be okay basically my guess is have a foot in both camps.
|
|
|
|
graycatgrayhat
Newbie
Offline
Activity: 4
Merit: 0
|
|
May 10, 2017, 02:57:43 AM |
|
my guess is if you have a lot of amd a few nvidia should be okay. if you have a lot of nvidia a few rx 470/480 should be okay basically my guess is have a foot in both camps. That is the way it was looking, a moved my budget from 2k to 3k and thinking I might double my setup count. One AMD based possible with a mining OS as it has a fast ROI, and can do eth which I see is still holding strong. The other nvidia, half for good resale should that be needed and half to put more hash rate coins they accelerate at mining.
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4298
Merit: 8768
'The right to privacy matters'
|
|
May 10, 2017, 03:30:06 AM |
|
I was all amd I shifted to mostly nvidia
making 50 bucks a day so every 14 days I pay off 1 1080ti
so far 3 1080 ti"s are paid for.
Not sure how long the roll will last but just 28 more days means 5 1080 ti's will be paid for.
|
|
|
|
cashen
|
|
May 10, 2017, 04:50:41 AM |
|
I guess I might have a slight problem.
|
|
|
|
|