jaywaka2713
Sr. Member
Offline
Activity: 266
Merit: 250
aka 7Strykes
|
|
July 03, 2013, 09:49:09 PM |
|
I started mining DGC and the Client kept re-sync like all the other LTC type forks - Caps i notice does not do this , is there a plan to fix this in the future ?
in the end i found it was just easier to not have the wallet up - so i kind of gave up , The Caps wallet i can keep open all the time.
Client is not re-syncing and there's nothing to fix since all functions are completely normal. It's a GUI bug that you can solve by connecting to more peers. I completely disagree that there is "nothing to fix". Iv'e been using the MAC OSX client for about a month now, and every single day, about 5 times a day, the client wants to re-synchronize from scratch. I tried letting it go - but it freezes, so I simply close it, and reopen and it works completely fine for a few hours. I max out at 2 connections to the network at all time. More nodes please? rpcuser=yourusername rpcpassword=yourpassword server=1 addnode=24.138.46.123 addnode=76.79.201.54 addnode=198.245.60.126 addnode=93.186.200.124 addnode=107.20.222.119
save this in your digitalcoin.conf file placed in your application data directory. I am not proficient with knowledge when it comes to Mac, but place it where ever your blockchain files are stored. EDIT: Make sure your firewall isn't blocking the digitalcoin-qt software too. Unblock its ports.
|
|
|
|
|
|
|
|
|
The grue lurks in the darkest places of the earth. Its favorite diet is adventurers, but its insatiable appetite is tempered by its fear of light. No grue has ever been seen by the light of day, and few have survived its fearsome jaws to tell the tale.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
everybodyclapyohands
|
|
July 03, 2013, 09:58:52 PM |
|
save this in your digitalcoin.conf file placed in your application data directory. I am not proficient with knowledge when it comes to Mac, but place it where ever your blockchain files are stored.
EDIT: Make sure your firewall isn't blocking the digitalcoin-qt software too. Unblock its ports.
On Mac, it's ~/Library/Application Support/digitalcoin/ Here's what I have for nodes. Like jaywaka2713 said, make sure port 7999 is open/forwarded on your firewall. addnode=24.138.46.123 addnode=46.163.105.201 addnode=50.116.22.43 addnode=175.156.214.215 addnode=174.50.248.26 addnode=175.156.211.216 addnode=71.187.252.146 addnode=71.77.233.192 addnode=78.21.229.230 addnode=124.169.205.168 addnode=50.137.233.14 addnode=124.184.252.156 addnode=101.98.152.38 addnode=37.59.68.144 addnode=69.156.168.41 addnode=115.132.91.41
|
|
|
|
jaywaka2713
Sr. Member
Offline
Activity: 266
Merit: 250
aka 7Strykes
|
|
July 03, 2013, 10:06:48 PM |
|
save this in your digitalcoin.conf file placed in your application data directory. I am not proficient with knowledge when it comes to Mac, but place it where ever your blockchain files are stored.
EDIT: Make sure your firewall isn't blocking the digitalcoin-qt software too. Unblock its ports.
On Mac, it's ~/Library/Application Support/digitalcoin/ Here's what I have for nodes. Like jaywaka2713 said, make sure port 7999 is open/forwarded on your firewall. addnode=24.138.46.123 addnode=46.163.105.201 addnode=50.116.22.43 addnode=175.156.214.215 addnode=174.50.248.26 addnode=175.156.211.216 addnode=71.187.252.146 addnode=71.77.233.192 addnode=78.21.229.230 addnode=124.169.205.168 addnode=50.137.233.14 addnode=124.184.252.156 addnode=101.98.152.38 addnode=37.59.68.144 addnode=69.156.168.41 addnode=115.132.91.41
That is an impressive node list! Going to have to expand mine lol.
|
|
|
|
CartmanSPC
Legendary
Offline
Activity: 1270
Merit: 1000
|
|
July 03, 2013, 10:46:10 PM Last edit: July 04, 2013, 12:44:20 AM by CartmanSPC |
|
Open the port both incoming and outgoing. The incoming port should be directed/mapped to your wallet computer.
With just the outgoing port open I maxed out at 8 connections. Opening up incoming gets over 60.
Also, check to see if any local software firewall is also blocking the port.
|
|
|
|
philipkdick
Member
Offline
Activity: 84
Merit: 10
|
|
July 04, 2013, 05:08:33 AM |
|
I started mining DGC and the Client kept re-sync like all the other LTC type forks - Caps i notice does not do this , is there a plan to fix this in the future ?
in the end i found it was just easier to not have the wallet up - so i kind of gave up , The Caps wallet i can keep open all the time.
Client is not re-syncing and there's nothing to fix since all functions are completely normal. It's a GUI bug that you can solve by connecting to more peers. I also disagree , but as I'm not a coder I can't with authority , although I can see many other LTC fork coders working on this right now that are saying this is in fact a code / port error , so if you are saying you are a more competent coder than them , so be it. But I know what I know , and Caps does not resync even with no config, it's a nova fork. Just doing 1+1 .
|
|
|
|
mishax1
Legendary
Offline
Activity: 2898
Merit: 1017
|
|
July 04, 2013, 04:04:41 PM |
|
Started mining solo, found 5 block ( 5 transaction shown) yet got paid only 4 of them ? was that an orphan block ?
|
|
|
|
kebis
Newbie
Offline
Activity: 37
Merit: 0
|
|
July 05, 2013, 01:53:28 AM |
|
I have actually been having the same syncing issue and only with the dgc wallet none of the others. I put all the nodes and and now I have 7 connections instead of the 2 I had before. It sill does it. Every couple hrs it will start over somewhere around 18-20k blocks behind but if I close it and re-open it is synced. Not really huge deal though but can be annoying at times.
|
|
|
|
Eli0t
|
|
July 05, 2013, 02:11:22 AM |
|
Started mining solo, found 5 block ( 5 transaction shown) yet got paid only 4 of them ? was that an orphan block ? use the debug window and showtransactions
|
LTC: LKpJf3uk7KsHU73kxq8iFJrP1AAKN7Yni7 DGC: DKXGvEbj3Rwgrm2QQbRyNPDDZDYoq4Y44d XPM: AWV5AKfLFyoBaMjg9C77rGUBhuFxz5DGGL
|
|
|
Lollaskates
|
|
July 05, 2013, 02:44:27 AM |
|
what's the word on BTC-E
|
|
|
|
Eli0t
|
|
July 05, 2013, 02:45:50 AM |
|
rumours of a btc-e shareholder vote are unconfirmed at this time
|
LTC: LKpJf3uk7KsHU73kxq8iFJrP1AAKN7Yni7 DGC: DKXGvEbj3Rwgrm2QQbRyNPDDZDYoq4Y44d XPM: AWV5AKfLFyoBaMjg9C77rGUBhuFxz5DGGL
|
|
|
mishax1
Legendary
Offline
Activity: 2898
Merit: 1017
|
|
July 05, 2013, 05:21:34 AM |
|
Started mining solo, found 5 block ( 5 transaction shown) yet got paid only 4 of them ? was that an orphan block ? use the debug window and showtransactions doesnt work ?
|
|
|
|
everybodyclapyohands
|
|
July 05, 2013, 06:59:17 AM |
|
Started mining solo, found 5 block ( 5 transaction shown) yet got paid only 4 of them ? was that an orphan block ? use the debug window and showtransactions doesnt work ? the command is listtransactions
|
|
|
|
Bortmehanic
Full Member
Offline
Activity: 153
Merit: 100
Switchercoin.com
|
|
July 05, 2013, 07:54:01 AM |
|
Let me introduce pool with minimal fee http://digitalcoinpool.org* Reward Type: PPLNS * 0.5% Fee * USA mining servers * Stratum mining protocol and Low Stale Percentage * Individual and Pool Statistics * Share validation waiting period 120 blocks * JSON API
|
|
|
|
r32godzilla
|
|
July 05, 2013, 09:34:09 AM |
|
Let me introduce pool with minimal fee http://digitalcoinpool.org* Reward Type: PPLNS * 0.5% Fee * USA mining servers * Stratum mining protocol and Low Stale Percentage * Individual and Pool Statistics * Share validation waiting period 120 blocks * JSON API Nice. Need more pools and to spread out the mining loads
|
|
|
|
CaptChadd
|
|
July 05, 2013, 10:20:35 AM |
|
Well I won something on the Digitalcoin market place but there is no way to pay for it. Is the site not working or fake?
|
|
|
|
mishax1
Legendary
Offline
Activity: 2898
Merit: 1017
|
|
July 05, 2013, 11:12:34 AM |
|
Started mining solo, found 5 block ( 5 transaction shown) yet got paid only 4 of them ? was that an orphan block ? use the debug window and showtransactions doesnt work ? the command is listtransactions thank you. those indeed were orphans
|
|
|
|
mishax1
Legendary
Offline
Activity: 2898
Merit: 1017
|
|
July 05, 2013, 11:15:54 AM |
|
And on another matter... when I open the wallet then open cgwatcher to run solo mining this happens every single time.. :
|
|
|
|
baritus (OP)
Legendary
Offline
Activity: 966
Merit: 1052
|
|
July 05, 2013, 02:55:52 PM |
|
If that only happens with CGWatcher, there might be some incompatibility.
|
Digitalcoin - Sha256, Scrypt, x11 Mining - Multi-algorithm & One Click Masternodes - Founded in 2013
|
|
|
Eli0t
|
|
July 05, 2013, 07:18:49 PM |
|
cgwatcher needs .NET framework 4.0. if you have that already ask them what C++ runtime version you need Started mining solo, found 5 block ( 5 transaction shown) yet got paid only 4 of them ? was that an orphan block ? use the debug window and showtransactions doesnt work ? sorry wrong cmd, use listtransactions
|
LTC: LKpJf3uk7KsHU73kxq8iFJrP1AAKN7Yni7 DGC: DKXGvEbj3Rwgrm2QQbRyNPDDZDYoq4Y44d XPM: AWV5AKfLFyoBaMjg9C77rGUBhuFxz5DGGL
|
|
|
canth
Legendary
Offline
Activity: 1442
Merit: 1001
|
|
July 05, 2013, 11:05:19 PM |
|
Let me introduce pool with minimal fee http://digitalcoinpool.org* Reward Type: PPLNS * 0.5% Fee * USA mining servers * Stratum mining protocol and Low Stale Percentage * Individual and Pool Statistics * Share validation waiting period 120 blocks * JSON API Excellent. Good timing - just started getting a ton of rejections on dgc.scryptmining.com. Got my 3Mh/s going to the pool.
|
|
|
|
|