Baikal Giant X10

[jb7032]

lol im getting good at putty

[GunsN]

Although I bought two units, there is no problem if there is only one unit, but if two units are powered up at the same time one unit will not be recognized.

Although the power of baikal X 10 is on, the blue lamp blinks on the main unit, it is recognized by Baikal Scanner, and it is Miner DOWN when accessing IP.

Does anyone know the solution?

Do you know what the blinking of the blue lamp means?

I would be pleased if you could help me.

I am an expert at the blue blinking light...Try a different pool on the second machine. Don't ask my why or how but that solved my issue, night 1.

which pool do you advice to us?

[pikachuy]

anyone have an issue where the web page for the miner is displayed weird and you can't log in? Another one of my machines has that problem but is mining fine.

Might be due to corrupted sd card, try re-flashing it and should fix it.

[Nakamurapc]

Yes, i trust

[nokonokono]

Although I bought two units, there is no problem if there is only one unit, but if two units are powered up at the same time one unit will not be recognized.

Although the power of baikal X 10 is on, the blue lamp blinks on the main unit, it is recognized by Baikal Scanner, and it is Miner DOWN when accessing IP.

Does anyone know the solution?

Do you know what the blinking of the blue lamp means?

I would be pleased if you could help me.

I am an expert at the blue blinking light...Try a different pool on the second machine. Don't ask my why or how but that solved my issue, night 1.

Thank you for answering.

However, even if I turned on the power switch connected to the baikal X 10, the blue light flashed, the green light turned off, and it turned into the Miner down state.

It became a problem before setting it to a different pool.

Does anyone know the solution?

[jb7032]

For what it's worth my problem child of a machine stayed online all night at this pool https://dgbq.suprnova.cc. Not sure if that has anything to do with it or not.

[jb7032]

Although I bought two units, there is no problem if there is only one unit, but if two units are powered up at the same time one unit will not be recognized.

Although the power of baikal X 10 is on, the blue lamp blinks on the main unit, it is recognized by Baikal Scanner, and it is Miner DOWN when accessing IP.

Does anyone know the solution?

Do you know what the blinking of the blue lamp means?

I would be pleased if you could help me.

I am an expert at the blue blinking light...Try a different pool on the second machine. Don't ask my why or how but that solved my issue, night 1.

Thank you for answering.

However, even if I turned on the power switch connected to the baikal X 10, the blue light flashed, the green light turned off, and it turned into the Miner down state.

It became a problem before setting it to a different pool.

Does anyone know the solution?

So you are saying that when you booted it for the first time it didn't start mining when you logged in with the default settings? If that's the case I would config your ip settings as it may not be getting to outside your network. If it did start mining the first time with the default settings, it's something with your pool settings. What happens if you click soft reset?

[Shorty2520]

Anyone from batch 2 got a waybill?

They asked me for the confirmation of the shipping details, but nothing new yet. Maybe it take some time because dgb price goes high?

[jb7032]

Spoke to soon my problem child just went down again. Takes 2 power cycles to get it back online..

[jb7032]

What temps do you all see on the bottom right? "Miner 2m 0s  -  Pi 2m 41s  -  Temp 42°C  -  Load 0.91" is what I see on my problem miner. The 42 is way higher then my other machines and I wonder why that would be.

[nokonokono]

Although I bought two units, there is no problem if there is only one unit, but if two units are powered up at the same time one unit will not be recognized.

Although the power of baikal X 10 is on, the blue lamp blinks on the main unit, it is recognized by Baikal Scanner, and it is Miner DOWN when accessing IP.

Does anyone know the solution?

Do you know what the blinking of the blue lamp means?

I would be pleased if you could help me.

I am an expert at the blue blinking light...Try a different pool on the second machine. Don't ask my why or how but that solved my issue, night 1.

Thank you for answering.

However, even if I turned on the power switch connected to the baikal X 10, the blue light flashed, the green light turned off, and it turned into the Miner down state.

It became a problem before setting it to a different pool.

Does anyone know the solution?

So you are saying that when you booted it for the first time it didn't start mining when you logged in with the default settings? If that's the case I would config your ip settings as it may not be getting to outside your network. If it did start mining the first time with the default settings, it's something with your pool settings. What happens if you click soft reset?

I arrived when I started with the default setting for the first time. After that, I was able to mining with setting Zpool, but it turned out to be in the state of Miner down.

After receiving your advice, I set up one with Zpool and the other with MiningPoolHub.

Press soft reset, "Miner: 111 Connection refuse" will be displayed. There is no change in the state of Minerdown.

I really appreciate it for giving me advice again and again.

[jb7032]

Try setting up 1 pool for Mph. Use a static port like stratum+tcp://hub.miningpoolhub.com:20499
I battled with miner connection refused for like 3 hours my first night and it ended up being something to do with the pool settings. Also if you are any good with terminal commands you can watch the sgminer window to see what errors it's throwing.

[nokonokono]

Try setting up 1 pool for Mph. Use a static port like stratum+tcp://hub.miningpoolhub.com:20499
I battled with miner connection refused for like 3 hours my first night and it ended up being something to do with the pool settings. Also if you are any good with terminal commands you can watch the sgminer window to see what errors it's throwing.

Thanks for the advice.

I set up only one pool at once. (Port 20524)
So far the situation does not change.


I am also struggling to move two units at the same time although one moves.

What is "sgminer window"?
Do I know by typing commands in Terminal?

[Alt.me]

Anyone have a clue what the optimal difficulty setting would be for dgb-groestl with these X10's? I'm using dgb.suprnova but not exactly sure how I should setup difficulty. Right now it is unconfigured, was able to get ~1800 DGB in 24hrs, but looking at profit calculators and difficulty changes would have thought over 2k would have been expected.

[bitcoinexplorer]

Anyone have a clue what the optimal difficulty setting would be for dgb-groestl with these X10's? I'm using dgb.suprnova but not exactly sure how I should setup difficulty. Right now it is unconfigured, was able to get ~1800 DGB in 24hrs, but looking at profit calculators and difficulty changes would have thought over 2k would have been expected.

Because the time you saw the online calculators the difficulty was different, along with you many too might have started mining so higher the diff, lower the rewards

[burnsauce]

Spoke to soon my problem child just went down again. Takes 2 power cycles to get it back online..

Mine went down for the 2nd time in 3 days just now as I was out running errands. Looks like it stopped right after I left.  Super annoying.

It came back up on the first reset though.

[Alt.me]

Anyone have a clue what the optimal difficulty setting would be for dgb-groestl with these X10's? I'm using dgb.suprnova but not exactly sure how I should setup difficulty. Right now it is unconfigured, was able to get ~1800 DGB in 24hrs, but looking at profit calculators and difficulty changes would have thought over 2k would have been expected.

Because the time you saw the online calculators the difficulty was different, along with you many too might have started mining so higher the diff, lower the rewards

Yeah I understand that but that had nothing to do with my question.

[bitcoinexplorer]

Anyone have a clue what the optimal difficulty setting would be for dgb-groestl with these X10's? I'm using dgb.suprnova but not exactly sure how I should setup difficulty. Right now it is unconfigured, was able to get ~1800 DGB in 24hrs, but looking at profit calculators and difficulty changes would have thought over 2k would have been expected.

Because the time you saw the online calculators the difficulty was different, along with you many too might have started mining so higher the diff, lower the rewards

Yeah I understand that but that had nothing to do with my question.

lol 

[bitcoinexplorer]

Can anyone tell me any branded PSU model such as Evga , Corsair or equivalent which is 1600 watt or above and have at least 2 sets of (12V 6Pin connector * 6) so i can run two Giant X10 on it, thank you

[GunsN]

You don't need 1600 w for 2 X10 if you don't mining on x11 algho, I have HP 1200 server psu and it's enough for it.