Baikal Giant X10

[antosha571]

https://www.mining-dutch.nl/ are a good pool with auto btc conversion, xvg and geo doing well there

Is it possible on mining-dutch.nl to automatically change the algorithms for their profitability? For example miningpoolhub can.

[darkly spectre]

well my X10 is fucked.

still can't get into it.

connection refused.

reseated all the connectors(friend back home is doing this). changed the UTP cable to a different switch.

now its telling me that my connection timed out. I can see it if I run a network scanner. but I just can't get into the GUI.

fucking baikal  

[mikej007]

https://www.mining-dutch.nl/ are a good pool with auto btc conversion, xvg and geo doing well there

Is it possible on mining-dutch.nl to automatically change the algorithms for their profitability? For example miningpoolhub can.

They have a multi port for algos to mine whichever is more profitable at the time, check the getting started page which should help

[Ghattas]

well my X10 is fucked.

still can't get into it.

connection refused.

reseated all the connectors(friend back home is doing this). changed the UTP cable to a different switch.

now its telling me that my connection timed out. I can see it if I run a network scanner. but I just can't get into the GUI.

fucking baikal  

I'm faceing the same problem after i start the miner for hours. try to shut it reboot it and wait 1 or 2 mins then try to get into it

[Marcel32x]

Can somebody tell me the official Baikal Skype Account?

[craigh]

Can somebody tell me the official Baikal Skype Account?

https://bitcointalk.org/index.php?topic=1804508.0

[mojoo98]

guys I hope everyone sees this post quote it with their current pool and coin and daily profit to help as much comers as we can and I find new pools on daily basis I will mention them on this quote
now I am winging between supernova(XVG) and alqo pool(ALQO)

[darkly spectre]

well my X10 is fucked.

still can't get into it.

connection refused.

reseated all the connectors(friend back home is doing this). changed the UTP cable to a different switch.

now its telling me that my connection timed out. I can see it if I run a network scanner. but I just can't get into the GUI.

fucking baikal  

I'm faceing the same problem after i start the miner for hours. try to shut it reboot it and wait 1 or 2 mins then try to get into it

its been turned on and off three times now.

[antosha571]

https://www.mining-dutch.nl/ are a good pool with auto btc conversion, xvg and geo doing well there

Is it possible on mining-dutch.nl to automatically change the algorithms for their profitability? For example miningpoolhub can.

They have a multi port for algos to mine whichever is more profitable at the time, check the getting started page which should help

You mean multiport on the one algorithm? And I want to switch between different algorithms. For example, I work  on Multiport Quark (mine Dimecoin) and then automatically switch to  Multiport myrgro (mine XVG)  and then automatically switch to qubit (mine  Digibyte_Qubit)  and etc, for the best profitable at the time. How can I do this?

[burnsauce]

guys I hope everyone sees this post quote it with their current pool and coin and daily profit to help as much comers as we can and I find new pools on daily basis I will mention them on this quote
now I am winging between supernova(XVG) and alqo pool(ALQO)

I moved my Baikal mini's over to mining ALQO when I got my x10. I get a few a day. Since the 16th of December (about 4 weeks) I have mined ~180 ALQO with 300mh/s (I'll let you do the math). I use this pool for that: http://mineblocks.co.uk/getting_started It mines right to your wallet. Payouts every round.

I have my x10 mining XVG on supernova for about a week now. Pulling in between 600 - 450 per day. I don't have a good read on today because the miner went off-line for about 6 hours while I was at work.

Both pools have been very reliable.

[Marvell2]

guys I hope everyone sees this post quote it with their current pool and coin and daily profit to help as much comers as we can and I find new pools on daily basis I will mention them on this quote
now I am winging between supernova(XVG) and alqo pool(ALQO)

I moved my Baikal mini's over to mining ALQO when I got my x10. I get a few a day. Since the 16th of December (about 4 weeks) I have mined ~180 ALQO with 300mh/s (I'll let you do the math). I use this pool for that: http://mineblocks.co.uk/getting_started It mines right to your wallet. Payouts every round.

I have my x10 mining XVG on supernova for about a week now. Pulling in between 600 - 450 per day. I don't have a good read on today because the miner went off-line for about 6 hours while I was at work.

Both pools have been very reliable.

http://xvg-mg.idcray.com/index.php

has been good for around 400  -450 verg a day for each x10 i have

im trying to figure out how to get multipool working on miningpoolhug and minindg duch atm

for some does anyone know if its correct to set priority to 1 for all the coins ? also they dont heave a default setting for the x10

we  really need a better pool for this miner.  For some reason the miner is mining skein atm on mining pool hub wtf lol

theres also no 17xxx port for quark so cant autoswitch to that its total junk out there

Mining duch does not have skien , cant find the perfect pool

but if mining duch pays out as expected i guess ill be on there.

Auto switching is the best useage for this asic , not manually jumping from pool to pool

[nokonokono]

help me.
When I connect to NiceHash with Baikal X 10, it will be Minerdown and it will not work properly.
Could you tell me the solution?

[HiddenA]

well my X10 is fucked.

still can't get into it.

connection refused.

reseated all the connectors(friend back home is doing this). changed the UTP cable to a different switch.

now its telling me that my connection timed out. I can see it if I run a network scanner. but I just can't get into the GUI.

fucking baikal  

Try to re-eject sd-card on Orange Pi (and write new firmware at same time).

[nokonokono]

Please give me some img of PiZero you can manage with NiceHash?
After updating to official version V1.1, it became Minerdown in NiceHash.
I am at a loss without moving, Please help me.

[burnsauce]

Please give me some img of PiZero you can manage with NiceHash?
After updating to official version V1.1, it became Minerdown in NiceHash.
I am at a loss without moving, Please help me.

Check the port numbers used on the default nicehash pools in the miner web-page.

Make sure they match what nicehash says they should be.

I think I remember reading a while back that the port numbers were wrong.

[Shorty2520]

guys I hope everyone sees this post quote it with their current pool and coin and daily profit to help as much comers as we can and I find new pools on daily basis I will mention them on this quote
now I am winging between supernova(XVG) and alqo pool(ALQO)

I moved my Baikal mini's over to mining ALQO when I got my x10. I get a few a day. Since the 16th of December (about 4 weeks) I have mined ~180 ALQO with 300mh/s (I'll let you do the math). I use this pool for that: http://mineblocks.co.uk/getting_started It mines right to your wallet. Payouts every round.

I have my x10 mining XVG on supernova for about a week now. Pulling in between 600 - 450 per day. I don't have a good read on today because the miner went off-line for about 6 hours while I was at work.

Both pools have been very reliable.

http://xvg-mg.idcray.com/index.php

has been good for around 400  -450 verg a day for each x10 i have

im trying to figure out how to get multipool working on miningpoolhug and minindg duch atm

for some does anyone know if its correct to set priority to 1 for all the coins ? also they dont heave a default setting for the x10

we  really need a better pool for this miner.  For some reason the miner is mining skein atm on mining pool hub wtf lol

theres also no 17xxx port for quark so cant autoswitch to that its total junk out there

Mining duch does not have skien , cant find the perfect pool

but if mining duch pays out as expected i guess ill be on there.

Auto switching is the best useage for this asic , not manually jumping from pool to pool

I did not used it but i think it is like nicehash, using the sgminer options below the poool settings.

I hope this will help you: https://www.nicehash.com/news/114

I've understand this after selling my Baikal Giant+  lol

[Shorty2520]

As i wrote i had several issues with the blue blinking LED's, this is gone without any change.

Now a new problem. I can ping the miner, it is working but i cannot acces it via browser and IP.

Only the baikal monitor shows it. Anyone same problems? Solutions?

[bigassboy]

As i wrote i had several issues with the blue blinking LED's, this is gone without any change.

Now a new problem. I can ping the miner, it is working but i cannot acces it via browser and IP.

Only the baikal monitor shows it. Anyone same problems? Solutions?

try power off and on back the miner

[mano237]

As i wrote i had several issues with the blue blinking LED's, this is gone without any change.

Now a new problem. I can ping the miner, it is working but i cannot acces it via browser and IP.

Only the baikal monitor shows it. Anyone same problems? Solutions?

try power off and on back the miner

I think many people have the problem, there is now fix out yet - Only miner off and on helps.

[nokonokono]

Please give me some img of PiZero you can manage with NiceHash?
After updating to official version V1.1, it became Minerdown in NiceHash.
I am at a loss without moving, Please help me.

Check the port numbers used on the default nicehash pools in the miner web-page.

Make sure they match what nicehash says they should be.

I think I remember reading a while back that the port numbers were wrong.

Thank you for your reply.
In this way, it is put in "Pool URL" of "Miner", but is not it matched by this?

x11      →stratum+tcp://x11.hk.nicehash.com:3336
quark   →stratum+tcp://quark.hk.nicehash.com:3345
qubit　 →stratum+tcp://qubit.hk.nicehash.com:3344