Antminer D3 Blissz firmware (10/12 v1.12 update)

[Friday13]

After this update for my D3 September Batch i did those confs:

Manual fan: 45%
Frequency: 475M
ASIC Voltage: Lowest

And i have a HW of 7384 in last 1hr
is this ok?

i would say its definitely not ok.
7384 per hour is to much...
actually i also working with the lowest voltage and i can run my d3's only with 400Mhz and one or two chains with 406Mhz with nearly no error 24/7, but thats it.
and i just want that these are living long and with that much hw errors i think they will not

[chapsmx]

https://imgur.com/a/z9uyZ

any idea why this is happening? Doesn't make sense....

any idea why this is happening?
https://i.imgur.com/Dx30uIw.jpg

my d3 ran for 24 hours @ 500 freq without hw errors or reboots, but still that chart looks insane and doesnt make any sense...
https://i.imgur.com/dFOOd6h.jpg


any idea?

[lashatatu]

blissz can you add option to easily change pool priority like in one or two clicks?

[nid125]

blissz can you add option to easily change pool priority like in one or two clicks?

Exactly, I been suggesting this useful feature already long time a go   (page 21)

We have poll on top of the page and auto tune will be the feature I wish to see first.

Also one more option I believe will save everyone some frustration when comes to the pools.
I think very handy will be option to setup priority instead of rewriting or copy/paste all pool details when want to change them, something like iBeLink have. I find this very useful

[lashatatu]

blissz can you add option to easily change pool priority like in one or two clicks?

Exactly, I been suggesting this useful feature already long time a go   (page 21)

We have poll on top of the page and auto tune will be the feature I wish to see first.

Also one more option I believe will save everyone some frustration when comes to the pools.
I think very handy will be option to setup priority instead of rewriting or copy/paste all pool details when want to change them, something like iBeLink have. I find this very useful

thx not really payed attention on that poll thought it was some kind of survey poll, and following this tread after page 80 not really read anything poster before that

[nid125]

blissz can you add option to easily change pool priority like in one or two clicks?

Exactly, I been suggesting this useful feature already long time a go   (page 21)

We have poll on top of the page and auto tune will be the feature I wish to see first.

Also one more option I believe will save everyone some frustration when comes to the pools.
I think very handy will be option to setup priority instead of rewriting or copy/paste all pool details when want to change them, something like iBeLink have. I find this very useful

thx not really payed attention on that poll thought it was some kind of survey poll, and following this tread after page 80 not really read anything poster before that

Thats fine, don't worry about that poll. I quote my post regarding that pool switching possibilities which I mentioned there after that poll info
Just saying, will be realy good have some kind of pool management available.
 

[david916]

Can you please put the voltage in the status section?  It's hard to calculate efficiency with that missing in the status area.

Thanks.

[funminer]

Can you please put the voltage in the status section?  It's hard to calculate efficiency with that missing in the status area.

Thanks.

It´s not possible to calculate your efficiency with the voltage settings in the miner, every miner is different, it´s depend on your PSU, too
The only correct way to calculate is with messure the watt usage on your PSU, that you get W/GH.

[david916]

Can you please put the voltage in the status section?  It's hard to calculate efficiency with that missing in the status area. Thanks.

It´s not possible to calculate your efficiency with the voltage settings in the miner, every miner is different, it´s depend on your PSU, too
The only correct way to calculate is with messure the watt usage on your PSU, that you get W/GH.

Your view of efficiency is too narrow.  Each chain can have a unique voltage setting, which affects performance (including HW error rates).  There is no reason to not include this simple information in the status page, since obviously, we need this information to properly assess the overall status and assess the need for corresponding changes.

[may142012]

Is there a way to block the dev pools?

[david916]

Is there a way to block the dev pools?

READ this thread.  SEARCH this thread.  Don't just POST.

[lashatatu]

Is there a way to block the dev pools?

yes it is, use bitmain firmware

when you make 10$ and not willing to pay even 0.15$ for service, it says a lot about you

[bcn2048]

hello, happy new year!

I wish to you all ROI with D3 max 7 months 

best regards 

[nid125]

One of my D3 (batch1 17.0G) behaving very well i must say...
Stable 22GH/s
Voltage 14,13,14
Freq 594,575,594
Fan auto performance
Wattage from the wall 1330W

[NewHeroLT]

Happy New Year to ya all Best profit and luck ;-)

[prince2k]

Hi Team Really apreciate all the efforts done, I have a realy strange problem after little while from workin with my D3 upgrade with your last software, the machine did not recognise the login/passwd i have change nothing i don't know why !
Can anyone help me please ?
Thanks in advance

[sculrow]

Hi Team Really apreciate all the efforts done, I have a realy strange problem after little while from workin with my D3 upgrade with your last software, the machine did not recognise the login/passwd i have change nothing i don't know why !
Can anyone help me please ?
Thanks in advance

can you check the corresponding ip first ?? of your machine ?  is it the same ?? or just cache ....

[david916]

Is there a way to block the dev pools?

yes it is, use bitmain firmware
when you make 10$ and not willing to pay even 0.15$ for service, it says a lot about you

I agree with your point, but your math doesn't make any sense (I'll explain in a subsequent post).

On that note, blissz, can you confirm that you are redirecting mining pools for 90 seconds per hour?  Is that correct?

Thanks.

[blissz]

On that note, blissz, can you confirm that you are redirecting mining pools for 90 seconds per hour?  Is that correct?
Thanks.

You can check the kernel log: it's actually 110 seconds and then two hours on your pools. So 1,5%

[blissz]

Happy New Year to ya all Best profit and luck ;-)

+1 to all d3 owners here! Thanks