Antminer D3 Blissz firmware (10/12 v1.12 update)

[cumbrian-miner]

Is there any way of adjusting Fans 1 and 2 separately?

Only on one machine I have the fans working at two different speeds, which is making for some annoying noises...

[1714976900]

1714976900

[1714976900]

1714976900

[martyshmoo]

I got a d3, an L3+, and a S9 for sale if anyone is interested

Send me the L3, but why (The L3+)?

[Wananavu99]

This question might have been asked a dozen times already so apologies.  But does anyone know what the frequency default setting is on the D3? 

[stravagarious]

This question might have been asked a dozen times already so apologies.  But does anyone know what the frequency default setting is on the D3? 

If you click on miner status tab and you will see it on the bottom

[Seelenernter]

Hi guys
please be careful when visiting the page www.inginer.xyz.

Your CPU usage will boost to 100%. It´s a mining site.

[micairvas]

It;s prohashing related. I actually found what's the problem so it will be fixed in the next release

When you will release next hf?
I tried to insert static difficulty values 512 and 64 but problem is still here. Please fix this problem as soon as possible, my D3 miners switching pools 1000 times per day.

[thesavoyard]

I still have some work to do with the air vent but this software made it quiet enough to run. I had it off for so long because of the noise, it was driving me up a wall. I bought some flex tube, need to attach it from the back of the unit to the exhaust duct so that 100% of the exhaust goes out of the sound suppressing box. That should allow me to lower the fan speeds.

[johnmacknamara]

Hi Blissz, thank you for the great firmware! Now I'm able to get better hashrates with low noise/fan speed that I used here in my apartment!

When you talk about autotune feature, do you mean something like these two options below?

1 - Autotune for lower noise possible: The user sets the maximum fan speed he can run according to his wanted noise level, and the firmware will try to find the best set of frequency and voltage while keeping the temperature below 80C and hardware errors below 10 per hour. For example: I set fan speed to 40%, and the firmware will look for the best frequency and voltage while keeping the temp and errors within the recommended levels.

2 - Autotune for best performance: In this case you don't have noise level restrictions so the firmware will try to get the best out of your D3 while keeping temp and errors below the recommended levels.

By the way, the feature for different settings for day and night use would be really interesting too, and the user can set the time he wants it to change from one setting to the other.

Highly apprecciate your work! Thanks again!

[JACKSEG]

Hi, to all
Yesterday my Antminer D3 Chain #3 is disappeared!

Hi,
Can you control the power lines in chain 3 ?
Switch with power lines in chain 2 or 1.
If it works, it's a power supply problem.

[stugots2]

any new news on another Algo?

[kristikun]

wierd question my D3 is in really cold room with open windows so the temperature is nearly same as outside , that way im able to OC 24gh with temps bellow 70c just fine but at night the temperature goes to even - 5 c my chip temp goes  bellow 50 c  , im wondering if it can´t hurt the machine in anyway like freezing some parts or sumthing becouse soon the outside temp will  reach - 10c and im not sure if its okay

[flowerpower84]

Hi, to all
Yesterday my Antminer D3 Chain #3 is disappeared!

Hi,
Can you control the power lines in chain 3 ?
Switch with power lines in chain 2 or 1.
If it works, it's a power supply problem.

I have switched the power lines but same problem, in kernel log I see this: https://s2.postimg.org/lmuv3cpix/zero_asic_chain.jpg
I have also switched flat cables, but same problem.
In the last I have insert the chain #3 flat cable in the last free slot (address #3) [chain #1 --> is chain 0, chain #2 --> is chain 1, chain #3 -->is chain 2] but same problem, in kernel log I see this: https://s2.postimg.org/k7taekypl/kernel_zero_asic_chain_3.jpg
Zero Asic for chain #3.
Why? And why I have same hashrate with only 2 working chains? I don't understand

[mkmfins]

Hi, to all
Yesterday my Antminer D3 Chain #3 is disappeared!
I have resetted the Antminer D3, but same problem, I have flashed the latest Bliss firmware but same problem.
The hashrate is the same of 3 chains visible. 
What's the problem? How can I solve?
Thank you in advance!
https://s2.postimg.org/za0xc06vb/chain_3_disappeared.jpg

I'm having this same problem ...
As incredible as it may seem Chain is still working, you just disconnect it from the cables that will see that your GH / S (GH / S) will fall, but now I wonder how to solve it?
Did it burn? Is it wanting to burn?

The source is not, because I changed sources with the other machines I have here and it continued the same thing.

[caymanguy]

my money balance zero in nice hash
i cant even mine there
where to mine now
bitshit and now niceshit

[deezhere]

Hi, to all
Yesterday my Antminer D3 Chain #3 is disappeared!

Hi,
Can you control the power lines in chain 3 ?
Switch with power lines in chain 2 or 1.
If it works, it's a power supply problem.

I have switched the power lines but same problem, in kernel log I see this: https://s2.postimg.org/lmuv3cpix/zero_asic_chain.jpg
I have also switched flat cables, but same problem.
In the last I have insert the chain #3 flat cable in the last free slot (address #3) [chain #1 --> is chain 0, chain #2 --> is chain 1, chain #3 -->is chain 2] but same problem, in kernel log I see this: https://s2.postimg.org/k7taekypl/kernel_zero_asic_chain_3.jpg
Zero Asic for chain #3.
Why? And why I have same hashrate with only 2 working chains? I don't understand

I've had this same problem with 4 of my D3 miners now. I've done all of the troubleshooting, swapped power supplies with known good ones, moved hashboards, cables and even ran the miners with only the non-working hashboard connected which still showed in the global hashrate that it was hashing but the chain was showing 0 ASIC in the kernel log. I've shipped all 4 of those hashboards back to bitmain for repair.

[caymanguy]

i will sell my d3
game over i have 5 unit

[hazzardouz]

Can you fix the bug with Dev Fee miners please where if pools 1, 2 & 3 are unavailable that it mines Dev Fees the whole time?

My miners have been mining Dev Fees for the last 12+ hours using a very large amount of electricity because it was unable to connect to a pool...?

I would rather have it idle if it is unable to connect to a pool.

[caymanguy]

Can you fix the bug with Dev Fee miners please where if the address is down for pools 1, 2 & 3 that it does not mine for hours on dev fee?

My miners have been mining Dev Fee for the last 12+ hours using a very large amount of electricity because it was unable to connect to a pool...?

I would rather have it idle if it is unable to connect to a pool.

hehehehh
bitshit
niceshit
and now
dev ....

[samshanna]

Miners are switching pools 1000 times now.   WHen is the new release happening?   This problem needs to be fixed here.   All my pools are UP and its literally mining for you Blissz.   Please confirm you know this is a problem.  I may need to go back to standard firmware if this problem isn't fixed today.   Literally HALF my miners are mining for YOU.   This is unbelievable. 

[thistlecoins]

It it possible, with the factory firmware or with this firmware to start te mining with the fans disconnected or running very slow because of miner submerged in oil?

Thx

factory will fail due to lower than expected fan speed.

Read the release notes for Blissz firmware, there was a version where he allowed "fan speed zero", and I believe it is intended to disable all fan checks and/or allow you to run a 3rd party non-PWM fan.  I'm not set up yet to test that myself though.