Antminer D3 Blissz firmware (10/12 v1.12 update)

[Xjkeee]

How is the other algorithm coming..

You can dig TimeTravel algo without any firmware changes. It's not joke.
You will get many many rejected, and so few accepted..

ps: of course, it's not right way to use D3.

Really? Can it be done? Any side effect if it gets many rejects?

and how to do it, that is the question

[cryptonitro]

Guys.  I'm setup with zpool with 6 D3's.   Running around 17/GH each.   What diff should i be running?   Im showing roughly 20/GH total on Zpools dashboard.  I'm totally lost.  Thanks for the help.  

zPool shows the exact setup for a D3 on their home page with the dif of 92

"Bitmain D3 Settings:
URL: x11.mine.zpool.ca:3533#xnsub
Worker: <WALLET_ADDRESS>
Password: c=<SYMBOL>,d=92"

I have always used them as my backup to nicehash and since the hack they have been having issues with the pool since there are so many new users. I get a pretty close match on the hash reported.

How much do you make with zpool in 24h? Zpool had a history of taking 20% hidden fees before, so i am afraid of using that pool, i have prohashing as my backup pool.

dont worry it s only 15% hidden now ...

---->[]  

forget other algo like timetravel10 , be logic men ... instead if you want burn your miner , you wont have profit

[dndssc]

How is the other algorithm coming..

You can dig TimeTravel algo without any firmware changes. It's not joke.
You will get many many rejected, and so few accepted..

ps: of course, it's not right way to use D3.

https://ibb.co/hq13Pb
https://ibb.co/g97MAG I have try but the result is not good!

[fecell]

Really? Can it be done? Any side effect if it gets many rejects?

reject meaning your miner calc hash, but it hash was not correct.
TT algo have some different way to calc hashes, and only one way same as X11.
you calc only X11 by D3, and sometime it's hash correct for TT algo.
No, it's sooooooo badly way to use D3 (in stock firmware) to dig TT algo (MachineCoin).
May be some custom firmware will correctly generate TT hashes. who knows...

I have try but the result is not good!

yes. it's about I talk. sooooooo many rejected. wasting time.

[Maicol792]

How is the other algorithm coming..

You can dig TimeTravel algo without any firmware changes. It's not joke.
You will get many many rejected, and so few accepted..

ps: of course, it's not right way to use D3.

https://ibb.co/hq13Pb
https://ibb.co/g97MAG I have try but the result is not good!

for how many time you have tested?

[dndssc]

How is the other algorithm coming..

You can dig TimeTravel algo without any firmware changes. It's not joke.
You will get many many rejected, and so few accepted..

ps: of course, it's not right way to use D3.

https://ibb.co/hq13Pb
https://ibb.co/g97MAG I have try but the result is not good!

for how many time you have tested?

15min
hashrate showed on btxpool is 0....

[martyshmoo]

Blissz,  How is the other algorithm coming along with your explore?   Is there still a possibility? 

whats this mean?

Dec 10 10:53:48 (none) local0.warn cgminer[4188]: Lost 10 shares due to stratum disconnect on pool 0

M

[martyshmoo]

Guys.  I'm setup with zpool with 6 D3's.   Running around 17/GH each.   What diff should i be running?   Im showing roughly 20/GH total on Zpools dashboard.  I'm totally lost.  Thanks for the help.   

26

[martyshmoo]

Blissz I just upgraded my 6 rigs to your new release.   With 12/2 version I went 2 days with absolutely NO HW Errors..   All the sudden all rigs had tons of HW.   Assuming now that new release needs more power for some reason.  I'm going back to 12/2. 

Bet you needed to restart them, huh?

Restart restart restart,,,...... there is the extra profit.

Greed is a sin

M

[martyshmoo]

Blissz I just upgraded my 6 rigs to your new release.   With 12/2 version I went 2 days with absolutely NO HW Errors..   All the sudden all rigs had tons of HW.   Assuming now that new release needs more power for some reason.  I'm going back to 12/2. 

Bet you needed to restart them, huh?

Restart restart restart,,,...... there is the extra profit.

Greed is a sin

M

I cannot get back to Bitmain FW. I must be the blundering idiot.


Can someone tell me how to safely get out of Blisszware and back to BM FW?

It was not clear to me that EVERY time I restart, Like  20- 100 times a day with this software, is another 2 mins!

I ask the question, I get called Blundering Idiot?

Well, this whole thread should be considered "Promoting Malware" along with your software. It does everything a malware file does, trust me.

And it steals peoples money.

Please tell me how to get back (to the software) where I was when I boutght this d3.

I saved a backup, well that was just the settings i guess, because it still says Blissz..

I will leave you all alone forever (this should motivate you) to get me back to BM FW and back to a noisy, but efficiently paying machine.

Thanks, anyone,

M

I have concluded I am paying too much for it, no matter how much i enjoy it.

[martyshmoo]

Blissz I just upgraded my 6 rigs to your new release.   With 12/2 version I went 2 days with absolutely NO HW Errors..   All the sudden all rigs had tons of HW.   Assuming now that new release needs more power for some reason.  I'm going back to 12/2. 

Bet you needed to restart them, huh?

Restart restart restart,,,...... there is the extra profit.

Greed is a sin

M

I cannot get back to Bitmain FW. I must be the blundering idiot.


Can someone tell me how to safely get out of Blisszware and back to BM FW?

It was not clear to me that EVERY time I restart, Like  20- 100 times a day with this software, is another 2 mins!

I ask the question, I get called Blundering Idiot?

Well, this whole thread should be considered "Promoting Malware" along with your software. It does everything a malware file does, trust me.

And it steals peoples money.

Please tell me how to get back (to the software) where I was when I boutght this d3.

I saved a backup, well that was just the settings i guess, because it still says Blissz..

I will leave you all alone forever (this should motivate you) to get me back to BM FW and back to a noisy, but efficiently paying machine.

Thanks, anyone,

M

I have concluded I am paying too much for it, no matter how much i enjoy it.

I mean, at some point I think you knew, that we would be restarting our machines like 100 times a day to 60 times a day until we all help you with the perfection of a software that steals our money.

Then we, with "NO ERRORS", could possibly get to the 1.5% YOU TALKED ABOUT, DELETED, AND NOW ARE NOT TALKING ABOUT AGAIN.

No one gets this?

M

Hmmmmmmm.. WE RESTART TWO MORE MNUTES, HOW MANY TIMES YOU RESTART...?

[funminer]

Blissz I just upgraded my 6 rigs to your new release.   With 12/2 version I went 2 days with absolutely NO HW Errors..   All the sudden all rigs had tons of HW.   Assuming now that new release needs more power for some reason.  I'm going back to 12/2.  

Bet you needed to restart them, huh?

Restart restart restart,,,...... there is the extra profit.

Greed is a sin

M

I cannot get back to Bitmain FW. I must be the blundering idiot.


Can someone tell me how to safely get out of Blisszware and back to BM FW?

It was not clear to me that EVERY time I restart, Like  20- 100 times a day with this software, is another 2 mins!

I ask the question, I get called Blundering Idiot?

Well, this whole thread should be considered "Promoting Malware" along with your software. It does everything a malware file does, trust me.

And it steals peoples money.

Please tell me how to get back (to the software) where I was when I boutght this d3.

I saved a backup, well that was just the settings i guess, because it still says Blissz..

I will leave you all alone forever (this should motivate you) to get me back to BM FW and back to a noisy, but efficiently paying machine.

Thanks, anyone,

M

I have concluded I am paying too much for it, no matter how much i enjoy it.

I mean, at some point I think you knew, that we would be restarting our machines like 100 times a day to 60 times a day until we all help you with the perfection of a software that steals our money.

Then we, with "NO ERRORS", could possibly get to the 1.5% YOU TALKED ABOUT, DELETED, AND NOW ARE NOT TALKING ABOUT AGAIN.

No one gets this?

M

Hmmmmmmm.. WE RESTART TWO MORE MNUTES, HOW MANY TIMES YOU RESTART...?

I don´t know what you are doing with your D3, but my D3´s make a Auto restart 1 time a week, and work well maybe 1000-1500 HW a week and temp under 70C with Hashrate 17GH.
When you want go back to orig. Firmware just download the last from them and install like you do it with the Firmware from Blissz, don´t forget to delete your Browser Cache

[funminer]

I think the key to unlocking minera access is opening up the API in the firmware. Premium awesomeminer has the ability to configure this. I guess there's a command line way to do it via SSH, but I can't seem to figure it out.

But Awesome Miner can find the D3 without haveing API Access.
Have never used Minera, but maybe Minera add only Miners that have API Access.

Yes you can open the API via SSH, look on the Site from AwesomeMiner, there must be a Help page.

[BitAntonius]

Blissz, thanks for the 08/12 v1.11 update priority change fix. Now running 24+ hours without problems.

But I noticed that I get most of HW errors when miner is switching to the dev pools. It runs 2 hours without errors and in 2 minutes can get 100 of HW errors. How can it be?

[Maicol792]

How is the other algorithm coming..

You can dig TimeTravel algo without any firmware changes. It's not joke.
You will get many many rejected, and so few accepted..

ps: of course, it's not right way to use D3.

https://ibb.co/hq13Pb
https://ibb.co/g97MAG I have try but the result is not good!

for how many time you have tested?

15min
hashrate showed on btxpool is 0....

i can confirm... only wasted time.. i tested timetravel8 timetravel10 and btx ... only rejected hash... not waste your time boys... if you find a solution in firmware od asic programming we can mine only x11 ... good luck to all ... or we need a NEW COIN Profitable at X11

[martyshmoo]

Blissz I just upgraded my 6 rigs to your new release.   With 12/2 version I went 2 days with absolutely NO HW Errors..   All the sudden all rigs had tons of HW.   Assuming now that new release needs more power for some reason.  I'm going back to 12/2. 

Bet you needed to restart them, huh?

Restart restart restart,,,...... there is the extra profit.

Greed is a sin

M

I cannot get back to Bitmain FW. I must be the blundering idiot.


Can someone tell me how to safely get out of Blisszware and back to BM FW?

It was not clear to me that EVERY time I restart, Like  20- 100 times a day with this software, is another 2 mins!

I ask the question, I get called Blundering Idiot?

Well, this whole thread should be considered "Promoting Malware" along with your software. It does everything a malware file does, trust me.

And it steals peoples money.

Please tell me how to get back (to the software) where I was when I boutght this d3.

I saved a backup, well that was just the settings i guess, because it still says Blissz..

I will leave you all alone forever (this should motivate you) to get me back to BM FW and back to a noisy, but efficiently paying machine.

Thanks, anyone,

M

I have concluded I am paying too much for it, no matter how much i enjoy it.

I mean, at some point I think you knew, that we would be restarting our machines like 100 times a day to 60 times a day until we all help you with the perfection of a software that steals our money.

Then we, with "NO ERRORS", could possibly get to the 1.5% YOU TALKED ABOUT, DELETED, AND NOW ARE NOT TALKING ABOUT AGAIN.

No one gets this?

M

Hmmmmmmm.. WE RESTART TWO MORE MNUTES, HOW MANY TIMES YOU RESTART...?

[funminer]

Blissz I just upgraded my 6 rigs to your new release.   With 12/2 version I went 2 days with absolutely NO HW Errors..   All the sudden all rigs had tons of HW.   Assuming now that new release needs more power for some reason.  I'm going back to 12/2. 

Bet you needed to restart them, huh?

Restart restart restart,,,...... there is the extra profit.

Greed is a sin

M

I cannot get back to Bitmain FW. I must be the blundering idiot.


Can someone tell me how to safely get out of Blisszware and back to BM FW?

It was not clear to me that EVERY time I restart, Like  20- 100 times a day with this software, is another 2 mins!

I ask the question, I get called Blundering Idiot?

Well, this whole thread should be considered "Promoting Malware" along with your software. It does everything a malware file does, trust me.

And it steals peoples money.

Please tell me how to get back (to the software) where I was when I boutght this d3.

I saved a backup, well that was just the settings i guess, because it still says Blissz..

I will leave you all alone forever (this should motivate you) to get me back to BM FW and back to a noisy, but efficiently paying machine.

Thanks, anyone,

M

I have concluded I am paying too much for it, no matter how much i enjoy it.

I mean, at some point I think you knew, that we would be restarting our machines like 100 times a day to 60 times a day until we all help you with the perfection of a software that steals our money.

Then we, with "NO ERRORS", could possibly get to the 1.5% YOU TALKED ABOUT, DELETED, AND NOW ARE NOT TALKING ABOUT AGAIN.

No one gets this?

M

Hmmmmmmm.. WE RESTART TWO MORE MNUTES, HOW MANY TIMES YOU RESTART...?

What is your Problem?
Have answered all your Questions.

Forget only one part, a Miner is build to run 24/7, and when you configure it correct normaly no restarts are needed!

[Tupsu]

I cannot get back to Bitmain FW. I must be the blundering idiot.


Can someone tell me how to safely get out of Blisszware and back to BM FW?

...............

Please tell me how to get back (to the software) where I was when I boutght this d3.

I saved a backup, well that was just the settings i guess, because it still says Blissz..

I will leave you all alone forever (this should motivate you) to get me back to BM FW and back to a noisy, but efficiently paying machine.

Thanks, anyone,

M

Antminer D3 - Firmware

https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066E

[LiteMine]

The complainers are hilarious, this FW lets my D3's operate quietly with lower power than stock. That is worth the fee right there, as my cooling solution was inadequate for the supertoaster stock D3's.

Flash it back and move on already

[mikespax]

In a world where Claymore charges 5% for dual mining, once every hour. You're here complaining about 1.5%? Would you prefer he charge a one time fee of $500 like spmod?