shinchan888
Newbie
 Offline
Activity: 50
Merit: 0
|
 |
February 28, 2018, 02:59:50 PM |
|
Besides coinexchange, any other Exchange can trade MAG?
|
|
|
|
|
|
|
DudeNamedSteve
Newbie
Offline
Activity: 107
Merit: 0
|
|
February 28, 2018, 06:00:26 PM |
|
Same result  root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet# apt-get install miniupnpc
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
minissdpd
The following NEW packages will be installed:
miniupnpc
0 upgraded, 1 newly installed, 0 to remove and 74 not upgraded.
Need to get 13.0 kB of archives.
After this operation, 53.2 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 miniupnpc amd64 1.9.20140610-2u
Fetched 13.0 kB in 0s (45.8 kB/s)
Selecting previously unselected package miniupnpc.
(Reading database ... 111007 files and directories currently installed.)
Preparing to unpack .../miniupnpc_1.9.20140610-2ubuntu2.16.04.2_amd64.deb ...
Unpacking miniupnpc (1.9.20140610-2ubuntu2.16.04.2) ...
Processing triggers for man-db (2.7.5-1) ...
Setting up miniupnpc (1.9.20140610-2ubuntu2.16.04.2) ...
root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet# wget http://magnetwork.io/Wallets/magnet-qt-LINUX.rar
--2018-02-28 06:49:56-- http://magnetwork.io/Wallets/magnet-qt-LINUX.rar
Resolving magnetwork.io (magnetwork.io)... 198.187.29.27
Connecting to magnetwork.io (magnetwork.io)|198.187.29.27|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4865731 (4.6M) [application/x-rar-compressed]
Saving to: ‘magnet-qt-LINUX.rar.1’
magnet-qt-LINUX.rar.1 100%[========================
2018-02-28 06:49:57 (8.75 MB/s) - ‘magnet-qt-LINUX.rar.1’ saved [4865731/4865731]
root@vultr:~/magnet# unrar e magnet-qt-LINUX.rar
UNRAR 5.30 beta 2 freeware Copyright (c) 1993-2015 Alexander Roshal
Extracting from magnet-qt-LINUX.rar
Would you like to replace the existing file magnetd
5152136 bytes, modified on 2018-01-30 20:47
with a new one
5152136 bytes, modified on 2018-01-30 20:47
[Y]es, [N]o, [A]ll, n[E]ver, [R]ename, [Q]uit y
Extracting magnetd OK
Would you like to replace the existing file magnet-qt
12311976 bytes, modified on 2018-01-30 20:47
with a new one
12311976 bytes, modified on 2018-01-30 20:47
[Y]es, [N]o, [A]ll, n[E]ver, [R]ename, [Q]uit y
Extracting magnet-qt OK
All OK
root@vultr:~/magnet# chmod +x magnetd
root@vultr:~/magnet#
root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet#
Screenshot here https://imgur.com/a/diVigAny other ideas? MN dreams are withering away. Can't use the cool new app. I'll offer a 100 coin bounty to solve this for us users reporting it  MAG of course lt looks like an issue with boost. what version are you using? I'm following the same PDF that iDev shows in his liked videos (thanks for the material iDev), and have tried a line by line approach on Ubuntu 17.10 and 16.04 to get the same results. https://imgur.com/a/8JeHmI trying the 16.04 version and magnet-qt-LINUX-xenial.rar advice now. Will update everyone. Thank you for any replies, bounty still offered to help me solve this. Best regards, Steve |
|
|
|
|
yatta
Member
Offline
Activity: 93
Merit: 10
|
|
February 28, 2018, 06:32:31 PM |
|
Seems that MAG is not going to Moon. Instant dump.
|
ETH 0xe3c8d2587e03ac3bdcb86794b8227c000db54d25
|
|
|
red023
Jr. Member
Offline
Activity: 103
Merit: 1
|
|
March 01, 2018, 12:36:51 AM |
|
Another coin with HTTP downloads to wallet and no checksums of course. People really do not fucking care at all.
|
|
|
|
|
blockonomy
Member
Offline
Activity: 121
Merit: 15
|
|
March 01, 2018, 10:36:31 AM |
|
Another coin with HTTP downloads to wallet and no checksums of course. People really do not fucking care at all.
Beside the unnecessary swearing you are right, we encourage people to compile from source but since we provide binaries we should also provide checksums. This will be fixed today. Thanks for pointing that out. |
|
|
|
|
blockonomy
Member
Offline
Activity: 121
Merit: 15
|
|
March 01, 2018, 01:06:06 PM |
|
Another coin with HTTP downloads to wallet and no checksums of course. People really do not fucking care at all.
Beside the unnecessary swearing you are right, we encourage people to compile from source but since we provide binaries we should also provide checksums. This will be fixed today. Thanks for pointing that out. Website has been updated to use https and checksums are now available on binaries : https://magnetwork.io/#wallet |
|
|
|
|
sergsvar
Jr. Member
Offline
Activity: 70
Merit: 1
|
|
March 01, 2018, 01:30:05 PM |
|
|
|
|
|
|
wabkebab
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 01, 2018, 02:32:44 PM |
|
Another coin with HTTP downloads to wallet and no checksums of course. People really do not fucking care at all.
Beside the unnecessary swearing you are right, we encourage people to compile from source but since we provide binaries we should also provide checksums. This will be fixed today. Thanks for pointing that out. Website has been updated to use https and checksums are now available on binaries : https://magnetwork.io/#walletActually, you should update all the related documentation that points to those binaries ( example: masternode manual), and also, change the extension from (prefork) .rar to (postfork) .zip. And, in some places of the new wallet still shows the old version number. This could lead to confusion to new users. Devil is in the details |
|
|
|
|
red023
Jr. Member
Offline
Activity: 103
Merit: 1
|
|
March 01, 2018, 02:58:03 PM |
|
Another coin with HTTP downloads to wallet and no checksums of course. People really do not fucking care at all.
Beside the unnecessary swearing you are right, we encourage people to compile from source but since we provide binaries we should also provide checksums. This will be fixed today. Thanks for pointing that out. Website has been updated to use https and checksums are now available on binaries : https://magnetwork.io/#walletWow that is a reaction I did not expect, this is the way it should be. Fixed hours later! Other coins I pointed that out did not react at all. Its such a pathetic disgusting display that I can't help but swear. There will be people getting hacked and their coin stolen because of behavior like this. Especially in this area people should be extra cautious but its just a fact that they do not care. And if the devs do not care its gets even worse. Anyway thanks anyway for at least fixing that so fast. Do you have compile instructions for the GUI wallet for ubuntu 17.10? I have not seen a single coin that offers that. If not can you write it. I tried build boxy recently and failed and gave up. |
|
|
|
|
blockonomy
Member
Offline
Activity: 121
Merit: 15
|
|
March 01, 2018, 06:25:17 PM |
|
Another coin with HTTP downloads to wallet and no checksums of course. People really do not fucking care at all.
Beside the unnecessary swearing you are right, we encourage people to compile from source but since we provide binaries we should also provide checksums. This will be fixed today. Thanks for pointing that out. Website has been updated to use https and checksums are now available on binaries : https://magnetwork.io/#walletActually, you should update all the related documentation that points to those binaries ( example: masternode manual), and also, change the extension from (prefork) .rar to (postfork) .zip. And, in some places of the new wallet still shows the old version number. This could lead to confusion to new users. Devil is in the details Thats also correct, we will be updating the documentation as well in coming days and patching these "evil" left over, agreed it is all in the details! |
|
|
|
|
blockonomy
Member
Offline
Activity: 121
Merit: 15
|
|
March 01, 2018, 06:29:26 PM |
|
Another coin with HTTP downloads to wallet and no checksums of course. People really do not fucking care at all.
Beside the unnecessary swearing you are right, we encourage people to compile from source but since we provide binaries we should also provide checksums. This will be fixed today. Thanks for pointing that out. Website has been updated to use https and checksums are now available on binaries : https://magnetwork.io/#walletWow that is a reaction I did not expect, this is the way it should be. Fixed hours later! Other coins I pointed that out did not react at all. Its such a pathetic disgusting display that I can't help but swear. There will be people getting hacked and their coin stolen because of behavior like this. Especially in this area people should be extra cautious but its just a fact that they do not care. And if the devs do not care its gets even worse. Anyway thanks anyway for at least fixing that so fast. Do you have compile instructions for the GUI wallet for ubuntu 17.10? I have not seen a single coin that offers that. If not can you write it. I tried build boxy recently and failed and gave up. We have plans to tidy up the build process as we will be moving to MW 2.0 on the roadmap. In the meantime we will try to take time for update the QT wallet tool chain and build process. |
|
|
|
|
Peter Sm.
Newbie
Offline
Activity: 59
Merit: 0
|
|
March 02, 2018, 12:52:42 PM |
|
Hello, I need a help.
I'm setting a masternode.
Vultr with Ubuntu 17.10
I followed all correctly,
then :~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libminiupnpc.so.10: cannot open shared object file: No such file or directory
I tried to fix it by myself but I'm not able..
apt-get install miniupnpc Same result root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet# apt-get install miniupnpc
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
minissdpd
The following NEW packages will be installed:
miniupnpc
0 upgraded, 1 newly installed, 0 to remove and 74 not upgraded.
Need to get 13.0 kB of archives.
After this operation, 53.2 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 miniupnpc amd64 1.9.20140610-2u
Fetched 13.0 kB in 0s (45.8 kB/s)
Selecting previously unselected package miniupnpc.
(Reading database ... 111007 files and directories currently installed.)
Preparing to unpack .../miniupnpc_1.9.20140610-2ubuntu2.16.04.2_amd64.deb ...
Unpacking miniupnpc (1.9.20140610-2ubuntu2.16.04.2) ...
Processing triggers for man-db (2.7.5-1) ...
Setting up miniupnpc (1.9.20140610-2ubuntu2.16.04.2) ...
root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet# wget http://magnetwork.io/Wallets/magnet-qt-LINUX.rar
--2018-02-28 06:49:56-- http://magnetwork.io/Wallets/magnet-qt-LINUX.rar
Resolving magnetwork.io (magnetwork.io)... 198.187.29.27
Connecting to magnetwork.io (magnetwork.io)|198.187.29.27|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4865731 (4.6M) [application/x-rar-compressed]
Saving to: ‘magnet-qt-LINUX.rar.1’
magnet-qt-LINUX.rar.1 100%[========================
2018-02-28 06:49:57 (8.75 MB/s) - ‘magnet-qt-LINUX.rar.1’ saved [4865731/4865731]
root@vultr:~/magnet# unrar e magnet-qt-LINUX.rar
UNRAR 5.30 beta 2 freeware Copyright (c) 1993-2015 Alexander Roshal
Extracting from magnet-qt-LINUX.rar
Would you like to replace the existing file magnetd
5152136 bytes, modified on 2018-01-30 20:47
with a new one
5152136 bytes, modified on 2018-01-30 20:47
[Y]es, [N]o, [A]ll, n[E]ver, [R]ename, [Q]uit y
Extracting magnetd OK
Would you like to replace the existing file magnet-qt
12311976 bytes, modified on 2018-01-30 20:47
with a new one
12311976 bytes, modified on 2018-01-30 20:47
[Y]es, [N]o, [A]ll, n[E]ver, [R]ename, [Q]uit y
Extracting magnet-qt OK
All OK
root@vultr:~/magnet# chmod +x magnetd
root@vultr:~/magnet#
root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet#
Screenshot here https://imgur.com/a/diVigAny other ideas? MN dreams are withering away. Can't use the cool new app. I'll offer a 100 coin bounty to solve this for us users reporting it MAG of course Before executing ./magnetd, try this: sudo apt-get install build-essential libtool automake autotools-dev autoconf pkg-config libssl-dev libgmp3-dev libevent-dev bsdmainutils sudo apt-get install libboost-all-dev sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev sudo apt-get install libminiupnpc-dev sudo apt-get install unrar sudo apt-get upgrade Line by line. If you are under root, you can skip "sudo" at each line. |
|
|
|
|
TEmp69
Newbie
Offline
Activity: 20
Merit: 0
|
|
March 02, 2018, 06:31:01 PM |
|
Another coin with HTTP downloads to wallet and no checksums of course. People really do not fucking care at all.
Beside the unnecessary swearing you are right, we encourage people to compile from source but since we provide binaries we should also provide checksums. This will be fixed today. Thanks for pointing that out. Website has been updated to use https and checksums are now available on binaries : https://magnetwork.io/#walletWow that is a reaction I did not expect, this is the way it should be. Fixed hours later! Other coins I pointed that out did not react at all. Its such a pathetic disgusting display that I can't help but swear. There will be people getting hacked and their coin stolen because of behavior like this. Especially in this area people should be extra cautious but its just a fact that they do not care. And if the devs do not care its gets even worse. Anyway thanks anyway for at least fixing that so fast. Do you have compile instructions for the GUI wallet for ubuntu 17.10? I have not seen a single coin that offers that. If not can you write it. I tried build boxy recently and failed and gave up. Hello, we have a tutorial up now on discord inside of Support -> Tech.Support -> check the pinned messages on how to compile the magnet-qt wallet. Beside that are instructions on how to compile the magnetd daemon wallet version and how to speed up the synchronization process using a bootstrap file. |
|
|
|
|
DudeNamedSteve
Newbie
Offline
Activity: 107
Merit: 0
|
|
March 03, 2018, 06:11:38 AM |
|
Hello, I need a help.
I'm setting a masternode.
Vultr with Ubuntu 17.10
I followed all correctly,
then :~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libminiupnpc.so.10: cannot open shared object file: No such file or directory
I tried to fix it by myself but I'm not able..
apt-get install miniupnpc Same result root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet# apt-get install miniupnpc
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
minissdpd
The following NEW packages will be installed:
miniupnpc
0 upgraded, 1 newly installed, 0 to remove and 74 not upgraded.
Need to get 13.0 kB of archives.
After this operation, 53.2 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 miniupnpc amd64 1.9.20140610-2u
Fetched 13.0 kB in 0s (45.8 kB/s)
Selecting previously unselected package miniupnpc.
(Reading database ... 111007 files and directories currently installed.)
Preparing to unpack .../miniupnpc_1.9.20140610-2ubuntu2.16.04.2_amd64.deb ...
Unpacking miniupnpc (1.9.20140610-2ubuntu2.16.04.2) ...
Processing triggers for man-db (2.7.5-1) ...
Setting up miniupnpc (1.9.20140610-2ubuntu2.16.04.2) ...
root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet# wget http://magnetwork.io/Wallets/magnet-qt-LINUX.rar
--2018-02-28 06:49:56-- http://magnetwork.io/Wallets/magnet-qt-LINUX.rar
Resolving magnetwork.io (magnetwork.io)... 198.187.29.27
Connecting to magnetwork.io (magnetwork.io)|198.187.29.27|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4865731 (4.6M) [application/x-rar-compressed]
Saving to: ‘magnet-qt-LINUX.rar.1’
magnet-qt-LINUX.rar.1 100%[========================
2018-02-28 06:49:57 (8.75 MB/s) - ‘magnet-qt-LINUX.rar.1’ saved [4865731/4865731]
root@vultr:~/magnet# unrar e magnet-qt-LINUX.rar
UNRAR 5.30 beta 2 freeware Copyright (c) 1993-2015 Alexander Roshal
Extracting from magnet-qt-LINUX.rar
Would you like to replace the existing file magnetd
5152136 bytes, modified on 2018-01-30 20:47
with a new one
5152136 bytes, modified on 2018-01-30 20:47
[Y]es, [N]o, [A]ll, n[E]ver, [R]ename, [Q]uit y
Extracting magnetd OK
Would you like to replace the existing file magnet-qt
12311976 bytes, modified on 2018-01-30 20:47
with a new one
12311976 bytes, modified on 2018-01-30 20:47
[Y]es, [N]o, [A]ll, n[E]ver, [R]ename, [Q]uit y
Extracting magnet-qt OK
All OK
root@vultr:~/magnet# chmod +x magnetd
root@vultr:~/magnet#
root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet#
Screenshot here https://imgur.com/a/diVigAny other ideas? MN dreams are withering away. Can't use the cool new app. I'll offer a 100 coin bounty to solve this for us users reporting it MAG of course Before executing ./magnetd, try this: sudo apt-get install build-essential libtool automake autotools-dev autoconf pkg-config libssl-dev libgmp3-dev libevent-dev bsdmainutils sudo apt-get install libboost-all-dev sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev sudo apt-get install libminiupnpc-dev sudo apt-get install unrar sudo apt-get upgrade Line by line. If you are under root, you can skip "sudo" at each line. My friend, thank you from the bottom of my over worked heart. This step has been such a bummer, mining all 10k only to be stopped by configuration. The updates you advised got me through my issues, nothing Magnet related. Can you PM me an address and I'd love to send you 100 MAG or something! This FIXED my issue. Thank you community!! |
|
|
|
|
Peter Sm.
Newbie
Offline
Activity: 59
Merit: 0
|
|
March 03, 2018, 06:57:59 AM |
|
Good day! I'm happy that the issue was resolved. So, my magnet address is: MeoqQn1Z5iXB5zoywC3HHTcMjCDoceqtqR Could not pm you 'cause I'm new user on bitcoin talk.. ( Hello, I need a help.
I'm setting a masternode.
Vultr with Ubuntu 17.10
I followed all correctly,
then :~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libminiupnpc.so.10: cannot open shared object file: No such file or directory
I tried to fix it by myself but I'm not able..
apt-get install miniupnpc Same result root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet# apt-get install miniupnpc
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
minissdpd
The following NEW packages will be installed:
miniupnpc
0 upgraded, 1 newly installed, 0 to remove and 74 not upgraded.
Need to get 13.0 kB of archives.
After this operation, 53.2 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 miniupnpc amd64 1.9.20140610-2u
Fetched 13.0 kB in 0s (45.8 kB/s)
Selecting previously unselected package miniupnpc.
(Reading database ... 111007 files and directories currently installed.)
Preparing to unpack .../miniupnpc_1.9.20140610-2ubuntu2.16.04.2_amd64.deb ...
Unpacking miniupnpc (1.9.20140610-2ubuntu2.16.04.2) ...
Processing triggers for man-db (2.7.5-1) ...
Setting up miniupnpc (1.9.20140610-2ubuntu2.16.04.2) ...
root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet# wget http://magnetwork.io/Wallets/magnet-qt-LINUX.rar
--2018-02-28 06:49:56-- http://magnetwork.io/Wallets/magnet-qt-LINUX.rar
Resolving magnetwork.io (magnetwork.io)... 198.187.29.27
Connecting to magnetwork.io (magnetwork.io)|198.187.29.27|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4865731 (4.6M) [application/x-rar-compressed]
Saving to: ‘magnet-qt-LINUX.rar.1’
magnet-qt-LINUX.rar.1 100%[========================
2018-02-28 06:49:57 (8.75 MB/s) - ‘magnet-qt-LINUX.rar.1’ saved [4865731/4865731]
root@vultr:~/magnet# unrar e magnet-qt-LINUX.rar
UNRAR 5.30 beta 2 freeware Copyright (c) 1993-2015 Alexander Roshal
Extracting from magnet-qt-LINUX.rar
Would you like to replace the existing file magnetd
5152136 bytes, modified on 2018-01-30 20:47
with a new one
5152136 bytes, modified on 2018-01-30 20:47
[Y]es, [N]o, [A]ll, n[E]ver, [R]ename, [Q]uit y
Extracting magnetd OK
Would you like to replace the existing file magnet-qt
12311976 bytes, modified on 2018-01-30 20:47
with a new one
12311976 bytes, modified on 2018-01-30 20:47
[Y]es, [N]o, [A]ll, n[E]ver, [R]ename, [Q]uit y
Extracting magnet-qt OK
All OK
root@vultr:~/magnet# chmod +x magnetd
root@vultr:~/magnet#
root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet#
Screenshot here https://imgur.com/a/diVigAny other ideas? MN dreams are withering away. Can't use the cool new app. I'll offer a 100 coin bounty to solve this for us users reporting it MAG of course Before executing ./magnetd, try this: sudo apt-get install build-essential libtool automake autotools-dev autoconf pkg-config libssl-dev libgmp3-dev libevent-dev bsdmainutils sudo apt-get install libboost-all-dev sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev sudo apt-get install libminiupnpc-dev sudo apt-get install unrar sudo apt-get upgrade Line by line. If you are under root, you can skip "sudo" at each line. My friend, thank you from the bottom of my over worked heart. This step has been such a bummer, mining all 10k only to be stopped by configuration. The updates you advised got me through my issues, nothing Magnet related. Can you PM me an address and I'd love to send you 100 MAG or something! This FIXED my issue. Thank you community!! |
|
|
|
|
|
thiec
|
|
March 03, 2018, 09:00:36 AM |
|
Before executing ./magnetd, try this:
sudo apt-get install build-essential libtool automake autotools-dev autoconf pkg-config libssl-dev libgmp3-dev libevent-dev bsdmainutils
sudo apt-get install libboost-all-dev
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev
sudo apt-get install libminiupnpc-dev
sudo apt-get install unrar
sudo apt-get upgrade
Line by line.
If you are under root, you can skip "sudo" at each line.
My friend, thank you from the bottom of my over worked heart. This step has been such a bummer, mining all 10k only to be stopped by configuration. The updates you advised got me through my issues, nothing Magnet related. Can you PM me an address and I'd love to send you 100 MAG or something! This FIXED my issue. Thank you community!! Those command not only work for magnet, but also almost every x11 algo masternode. Thanks for magnet pdf tutorial and repost here so more simple to copas the command Those setup any necessary primary linux file to run a daemon in VPS especially in ubuntu. |
|
|
|
lengzai
Newbie
Offline
Activity: 4
Merit: 0
|
|
March 03, 2018, 02:42:33 PM |
|
Noob here.
I just installed the wallet qt.
What values do I put for:
rpcuser=INSERT_YOUR_USERNAME
rpcpassword=INSERT_YOUR_PASSWORD
|
|
|
|
|
DudeNamedSteve
Newbie
Offline
Activity: 107
Merit: 0
|
|
March 03, 2018, 06:51:54 PM
Last edit: March 04, 2018, 01:20:00 AM by DudeNamedSteve |
|
Good day! I'm happy that the issue was resolved. So, my magnet address is: MeoqQn1Z5iXB5zoywC3HHTcMjCDoceqtqR Could not pm you 'cause I'm new user on bitcoin talk.. ( Hello, I need a help.
I'm setting a masternode.
Vultr with Ubuntu 17.10
I followed all correctly,
then :~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libminiupnpc.so.10: cannot open shared object file: No such file or directory
I tried to fix it by myself but I'm not able..
apt-get install miniupnpc Same result root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet# apt-get install miniupnpc
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
minissdpd
The following NEW packages will be installed:
miniupnpc
0 upgraded, 1 newly installed, 0 to remove and 74 not upgraded.
Need to get 13.0 kB of archives.
After this operation, 53.2 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 miniupnpc amd64 1.9.20140610-2u
Fetched 13.0 kB in 0s (45.8 kB/s)
Selecting previously unselected package miniupnpc.
(Reading database ... 111007 files and directories currently installed.)
Preparing to unpack .../miniupnpc_1.9.20140610-2ubuntu2.16.04.2_amd64.deb ...
Unpacking miniupnpc (1.9.20140610-2ubuntu2.16.04.2) ...
Processing triggers for man-db (2.7.5-1) ...
Setting up miniupnpc (1.9.20140610-2ubuntu2.16.04.2) ...
root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet# wget http://magnetwork.io/Wallets/magnet-qt-LINUX.rar
--2018-02-28 06:49:56-- http://magnetwork.io/Wallets/magnet-qt-LINUX.rar
Resolving magnetwork.io (magnetwork.io)... 198.187.29.27
Connecting to magnetwork.io (magnetwork.io)|198.187.29.27|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4865731 (4.6M) [application/x-rar-compressed]
Saving to: ‘magnet-qt-LINUX.rar.1’
magnet-qt-LINUX.rar.1 100%[========================
2018-02-28 06:49:57 (8.75 MB/s) - ‘magnet-qt-LINUX.rar.1’ saved [4865731/4865731]
root@vultr:~/magnet# unrar e magnet-qt-LINUX.rar
UNRAR 5.30 beta 2 freeware Copyright (c) 1993-2015 Alexander Roshal
Extracting from magnet-qt-LINUX.rar
Would you like to replace the existing file magnetd
5152136 bytes, modified on 2018-01-30 20:47
with a new one
5152136 bytes, modified on 2018-01-30 20:47
[Y]es, [N]o, [A]ll, n[E]ver, [R]ename, [Q]uit y
Extracting magnetd OK
Would you like to replace the existing file magnet-qt
12311976 bytes, modified on 2018-01-30 20:47
with a new one
12311976 bytes, modified on 2018-01-30 20:47
[Y]es, [N]o, [A]ll, n[E]ver, [R]ename, [Q]uit y
Extracting magnet-qt OK
All OK
root@vultr:~/magnet# chmod +x magnetd
root@vultr:~/magnet#
root@vultr:~/magnet# ./magnetd
./magnetd: error while loading shared libraries: libboost_system.so.1.62.0: cannot open shared objec
root@vultr:~/magnet#
Screenshot here https://imgur.com/a/diVigAny other ideas? MN dreams are withering away. Can't use the cool new app. I'll offer a 100 coin bounty to solve this for us users reporting it MAG of course Before executing ./magnetd, try this: sudo apt-get install build-essential libtool automake autotools-dev autoconf pkg-config libssl-dev libgmp3-dev libevent-dev bsdmainutils sudo apt-get install libboost-all-dev sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev sudo apt-get install libminiupnpc-dev sudo apt-get install unrar sudo apt-get upgrade Line by line. If you are under root, you can skip "sudo" at each line. My friend, thank you from the bottom of my over worked heart. This step has been such a bummer, mining all 10k only to be stopped by configuration. The updates you advised got me through my issues, nothing Magnet related. Can you PM me an address and I'd love to send you 100 MAG or something! This FIXED my issue. Thank you community!! Sent man, 100 MAG. https://imgur.com/a/TvLVxKeep being good for the community, again thanks |
|
|
|
|
DudeNamedSteve
Newbie
Offline
Activity: 107
Merit: 0
|
|
March 03, 2018, 06:58:44 PM |
|
Noob here.
I just installed the wallet qt.
What values do I put for:
rpcuser=INSERT_YOUR_USERNAME
rpcpassword=INSERT_YOUR_PASSWORD
Couple things, considering I was in a similar boat setting up my first MN The video is really helpful, seeing someone do it. Here is the official: https://www.youtube.com/watch?v=_f3GtlreZEkSecond, first time you get to this step, it will suggest a randomly generated code for both. Starting the daemon We initially run the daemon so it creates the initial configuration files: The daemon will print the following error and exit. Error: To use magnetd, you must set a rpcpassword in the configuration file:
/home/contact/.magnet/magnet.conf
So the answer is inside the step, or you can make up your own. Just make it good Good luck man |
|
|
|
|
|
