allinvain
Legendary
Offline
Activity: 3080
Merit: 1080
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 04:24:12 AM |
|
I'd give him 0.60 per board for two h-cards, but this is of course not the correct section.
|
|
|
|
Morblias
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 04:26:12 AM |
|
Guys, I am not saying I want to sell but just to get a feel for where you all are at. I have 1 v-1 mboard and 4 v1 h-cards. The partial rig does 130GH/s pretty solid. What do you think the miner to miner BTC value would be all together or in pieces. For the record this has been one set that has needed no extra attention and very little time to keep her chugging.
I am not trying to sell in this thread, I know where to do that. I am only trying to get a metric from the audience that has the most interest in these and that is you guys. Just Information for me and for Tytus.
M-board V1=? H-card V1.2=?
In my mind, 0.75BTC for an M-board and 0.65BTC per H-board is a price that enables the kit to come close to breakeven, and promotes buying more cards That's right around where I was thinking also. I would most likely buy a full kit if it was around 11-12 BTC right now so I at least had a chance to mine that BTC back. I don't like looking at the USD prices and would rather look at how much BTC it costs vs how much BTC it will mine within the next ~6 months.
|
Tips / Donations accepted: 1Morb18DsDHNEv6TeQXBdba872ZSpiK9fY
|
|
|
Syke
Legendary
Offline
Activity: 3878
Merit: 1193
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 04:39:25 AM |
|
In my mind, 0.75BTC for an M-board and 0.65BTC per H-board is a price that enables the kit to come close to breakeven, and promotes buying more cards
Pretty close in price to the Bitmain units, so that's reasonable.
|
Buy & Hold
|
|
|
xstr8guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 04:51:42 AM |
|
I'm trying to show Tytus how much I can sell at these prices by Jan 1, so lets see if he likes lots of sales versus very few!
Thanks for putting up full rigs for re-order, Dave. Didn't realize Tytus was the price driver. Hopefully prices will become more sane after Jan.1st Not to be a dick but Dave has already mentioned that Tytus sets the price. And I've only mentioned a half dozen times myself, lol.
|
|
|
|
Keefe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 04:54:54 AM |
|
I'd pay 0.74 BTC for an H-card delivered Dec 19. At $630/BTC, that's $470. I saw the store price at $450 per card briefly but I was too slow. Did anyone else get the $450 price? $700 is way too high now. If the exchange rate shoots up to $950 by morning (highly unlikely IMO), I'll pay $700 for cards. Otherwise I'll just have to wait for Tytus to be willing to sell alot. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 04:56:24 AM |
|
Not to be a dick but Dave has already mentioned that Tytus sets the price. And I've only mentioned a half dozen times myself, lol.
I must have missed that ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Sorry dudes.
|
|
|
|
allinvain
Legendary
Offline
Activity: 3080
Merit: 1080
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 05:19:59 AM |
|
If they could match bitmain's prices I'd order. As it stands it's still too expensive. If anyone wants to sell two v1.2 h-cards at a reasonable price give me a shout.
|
|
|
|
Asinine
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 62
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 10:59:11 AM |
|
Wow, there is going to be a fire-sale of former Chinese mining rigs over the next month...
|
|
|
|
bkpduke
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 12:41:09 PM |
|
With the recent drop as low as $380/BTC this AM in the exchange rate, these are still over-priced for the difficulty. Someone please update Tytus. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
allinvain
Legendary
Offline
Activity: 3080
Merit: 1080
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 01:21:37 PM |
|
With the recent drop as low as $380/BTC this AM in the exchange rate, these are still over-priced for the difficulty. Someone please update Tytus. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Tytus is too busy enjoying his hookers and blow to care ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) lol
|
|
|
|
superduh
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 05:43:33 PM |
|
how is tytus related to megabigpower in any way? he just runs a mine. unless he bought out dave's company. the btc world shadniess amazes me.
|
ok
|
|
|
xstr8guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 06:07:42 PM |
|
how is tytus related to megabigpower in any way? he just runs a mine. unless he bought out dave's company. the btc world shadniess amazes me.
Bitfury chips were developed by intron & cscape for Tytus' mine. Without Tytus there would be no Bitfury. Read the first post in this thread.
|
|
|
|
intron
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 427
Merit: 251
- electronics design|embedded software|verilog -
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 06:56:44 PM |
|
how is tytus related to megabigpower in any way? he just runs a mine. unless he bought out dave's company. the btc world shadniess amazes me.
Bitfury chips were developed by intron & cscape for Tytus' mine. Without Tytus there would be no Bitfury. Read the first post in this thread. No no no. Valery (bitfury) designed the chip, we did the board designs. intron
|
|
|
|
Foofighter
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 06:57:52 PM |
|
how is tytus related to megabigpower in any way? he just runs a mine. unless he bought out dave's company. the btc world shadniess amazes me.
Bitfury chips were developed by intron & cscape for Tytus' mine. Without Tytus there would be no Bitfury. Read the first post in this thread.
|
ex official Canaan Distributor (Cryptouniverse)
|
|
|
xstr8guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 07:00:09 PM |
|
how is tytus related to megabigpower in any way? he just runs a mine. unless he bought out dave's company. the btc world shadniess amazes me.
Bitfury chips were developed by intron & cscape for Tytus' mine. Without Tytus there would be no Bitfury. Read the first post in this thread. No no no. Valery (bitfury) designed the chip, we did the board designs. intron Thanks for clarifying! But what I said is basically true... that without Tytus, Bitfury wouldn't exist, correct?
|
|
|
|
minternj
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 07:00:20 PM |
|
Too lazy to look but wasn't the chip largely funded by some Russian bank?
|
|
|
|
intron
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 427
Merit: 251
- electronics design|embedded software|verilog -
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 18, 2013, 07:02:17 PM |
|
how is tytus related to megabigpower in any way? he just runs a mine. unless he bought out dave's company. the btc world shadniess amazes me.
Bitfury chips were developed by intron & cscape for Tytus' mine. Without Tytus there would be no Bitfury. Read the first post in this thread. No no no. Valery (bitfury) designed the chip, we did the board designs. intron Thanks for clarifying! But what I said is basically true... that without Tytus, Bitfury wouldn't exist, correct? Yes, think so.
|
|
|
|
GandalfG
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 259
Merit: 250
Dig your freedom
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 19, 2013, 08:46:33 AM |
|
how is tytus related to megabigpower in any way? he just runs a mine. unless he bought out dave's company. the btc world shadniess amazes me.
Bitfury chips were developed by intron & cscape for Tytus' mine. Without Tytus there would be no Bitfury. Read the first post in this thread. No no no. Valery (bitfury) designed the chip, we did the board designs. intron Thanks for clarifying! But what I said is basically true... that without Tytus, Bitfury wouldn't exist, correct? Yes, think so. Tytus provide financial for many startup. And so without his help Bitfury chip probably would just as ambitious project. Thats why on chip are logo Tytus company (BioInfoBank). Valery and Tytus decide on price and who can buy chip, no one else.
|
Want to say thanks? 16ragydppe9QFRVhrdwEUjgfMS7KCfEFGY
|
|
|
Syke
Legendary
Offline
Activity: 3878
Merit: 1193
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 19, 2013, 06:25:42 PM |
|
It's a real shame these are overpriced. They're great systems. But prices need to go down over time, not up.
|
Buy & Hold
|
|
|
Xian01
Legendary
Offline
Activity: 1652
Merit: 1067
Christian Antkow
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 19, 2013, 08:14:24 PM |
|
Yeah the one above C01R is the one you want it gets pretty hot. Its a night and day difference for my cards, it runs with the heat sink in those locations and it will just plain shut down without them.
Just got a bag-o-heatsinks in from EBay. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FPv9sgQZ.jpg&t=663&c=FFlaL59JZhDLwA) Looks like I'm going to need to cut them up into 3x2 chunks ? Attach them to the location below ? Place them directly on the chip ?
|
|
|
|
|