[ANN] ZERO - COMMUNITY TAKEOVER

[leningradskiy90]

this looks familiar i will definitely want to reserved on this

[1714748901]

1714748901

[1714748901]

1714748901

[loganix]

Pls more infomation about  exchange list

[optiminer]

Your newer versions are under investigation after final versions appeared to produce wrong solutions. There are suspicions that those solutions could be back engineered to working state with proper actions applied from 3rd parties.

We currently direct everyone to use previous best working software as mysteriously old versions have disappeared from your github. At the same time when we have discovered this suspicious activity.

So, this is an accusation that my miner would try to cheat the users? This is a rather large claim. You better have some proof for that. It's the opposite, I actually reduced the fee from 2.5% (OptiminerZero) to 1% only in OptiminerEquihash.

The older versions of optiminer are all on the new download site.
http://download.optiminer.pl/optiminer-equihash-2.0.0.tar.gz
http://download.optiminer.pl/optiminer-equihash-2.1.0.tar.gz
http://download.optiminer.pl/optiminer-equihash-2.1.1.tar.gz
http://download.optiminer.pl/optiminer-equihash-2.1.2.tar.gz

github does not support well the hosting of large files. That's why the files have moved.

As you know very well we do pay fees for it so we can use it as much as we like.

If it is a problem for you we can all stop using it reverting back to a modded ccminer until we can have a community miner software.

Needs create solutions and whenever there is a big need a big solution is always found. If we find ourselves without a good working miner we can always create our own.
There was no need until now.... Let me know if there is one?

Sorry, you are very wrong here. The existence of a fee does not mean you can use it like you want. You need to accept and adhere to the license to use it. What you say is like saying with a rental car you can do anything you want because you pay a rent.

If you feel like writing your own miner, go ahead.

Here is an example from log files

We thought a block was found but it was rejected by the daemon, share data: {"job":"d3a2","ip":"::ffff:x.x.x.x","port":2053,"worker":"t1xxxxxxxxxeL","height":236147,"difficulty":0.2,"shareDiff":"4596.03419805","blockDiff":1351.176112912,"blockDiffActual":1351.176112912,"blockHash":"0000007212f19755fb017650d29e3823cf44a2b5aca1cf90baa36f3152951c0f","error":{"unknown":"check coin daemon logs"}}

ERROR: CheckEquihashSolution(): invalid solution
ERROR: CheckBlockHeader(): Equihash solution invalid

Have you considered that the user might just have used the wrong hash algorithm param when connecting to the pool?

[uskovartem]

optiminer, any news about updated miner for win (2.1.2?) or cuda implementation for nvidia-effective?

[lutsifer]

Here is an example from log files

We thought a block was found but it was rejected by the daemon, share data: {"job":"d3a2","ip":"::ffff:x.x.x.x","port":2053,"worker":"t1xxxxxxxxxeL","height":236147,"difficulty":0.2,"shareDiff":"4596.03419805","blockDiff":1351.176112912,"blockDiffActual":1351.176112912,"blockHash":"0000007212f19755fb017650d29e3823cf44a2b5aca1cf90baa36f3152951c0f","error":{"unknown":"check coin daemon logs"}}

ERROR: CheckEquihashSolution(): invalid solution
ERROR: CheckBlockHeader(): Equihash solution invalid

Have you considered that the user might just have used the wrong hash algorithm param when connecting to the pool?

If the protocol is different it goes right away as an error on the first submit.

[Demarsac]

Your newer versions are under investigation after final versions appeared to produce wrong solutions. There are suspicions that those solutions could be back engineered to working state with proper actions applied from 3rd parties.

We currently direct everyone to use previous best working software as mysteriously old versions have disappeared from your github. At the same time when we have discovered this suspicious activity.

So, this is an accusation that my miner would try to cheat the users? This is a rather large claim. You better have some proof for that. It's the opposite, I actually reduced the fee from 2.5% (OptiminerZero) to 1% only in OptiminerEquihash.

The older versions of optiminer are all on the new download site.
http://download.optiminer.pl/optiminer-equihash-2.0.0.tar.gz
http://download.optiminer.pl/optiminer-equihash-2.1.0.tar.gz
http://download.optiminer.pl/optiminer-equihash-2.1.1.tar.gz
http://download.optiminer.pl/optiminer-equihash-2.1.2.tar.gz

github does not support well the hosting of large files. That's why the files have moved.

As you know very well we do pay fees for it so we can use it as much as we like.

If it is a problem for you we can all stop using it reverting back to a modded ccminer until we can have a community miner software.

Needs create solutions and whenever there is a big need a big solution is always found. If we find ourselves without a good working miner we can always create our own.
There was no need until now.... Let me know if there is one?

Sorry, you are very wrong here. The existence of a fee does not mean you can use it like you want. You need to accept and adhere to the license to use it. What you say is like saying with a rental car you can do anything you want because you pay a rent.

If you feel like writing your own miner, go ahead.

Here is an example from log files

We thought a block was found but it was rejected by the daemon, share data: {"job":"d3a2","ip":"::ffff:x.x.x.x","port":2053,"worker":"t1xxxxxxxxxeL","height":236147,"difficulty":0.2,"shareDiff":"4596.03419805","blockDiff":1351.176112912,"blockDiffActual":1351.176112912,"blockHash":"0000007212f19755fb017650d29e3823cf44a2b5aca1cf90baa36f3152951c0f","error":{"unknown":"check coin daemon logs"}}

ERROR: CheckEquihashSolution(): invalid solution
ERROR: CheckBlockHeader(): Equihash solution invalid

Have you considered that the user might just have used the wrong hash algorithm param when connecting to the pool?

Impossible to accuse a fictional character. It's like accusing Donald Duck
But it is imperative to protect the community even from fictional characters

Give us your real name and identity here in the forum and then we can start the ball rolling

Thanks for the NEW links. We might use them in the next update


DM

[saman9074]

hi, zero added to tradesatoshi Exchange?

https://tradesatoshi.com/Exchange?market=ZERO_BTC

[zeki555]

Your newer versions are under investigation after final versions appeared to produce wrong solutions. There are suspicions that those solutions could be back engineered to working state with proper actions applied from 3rd parties.

We currently direct everyone to use previous best working software as mysteriously old versions have disappeared from your github. At the same time when we have discovered this suspicious activity.

So, this is an accusation that my miner would try to cheat the users? This is a rather large claim. You better have some proof for that. It's the opposite, I actually reduced the fee from 2.5% (OptiminerZero) to 1% only in OptiminerEquihash.

The older versions of optiminer are all on the new download site.
http://download.optiminer.pl/optiminer-equihash-2.0.0.tar.gz
http://download.optiminer.pl/optiminer-equihash-2.1.0.tar.gz
http://download.optiminer.pl/optiminer-equihash-2.1.1.tar.gz
http://download.optiminer.pl/optiminer-equihash-2.1.2.tar.gz

github does not support well the hosting of large files. That's why the files have moved.

As you know very well we do pay fees for it so we can use it as much as we like.

If it is a problem for you we can all stop using it reverting back to a modded ccminer until we can have a community miner software.

Needs create solutions and whenever there is a big need a big solution is always found. If we find ourselves without a good working miner we can always create our own.
There was no need until now.... Let me know if there is one?

Sorry, you are very wrong here. The existence of a fee does not mean you can use it like you want. You need to accept and adhere to the license to use it. What you say is like saying with a rental car you can do anything you want because you pay a rent.

If you feel like writing your own miner, go ahead.

Here is an example from log files

We thought a block was found but it was rejected by the daemon, share data: {"job":"d3a2","ip":"::ffff:x.x.x.x","port":2053,"worker":"t1xxxxxxxxxeL","height":236147,"difficulty":0.2,"shareDiff":"4596.03419805","blockDiff":1351.176112912,"blockDiffActual":1351.176112912,"blockHash":"0000007212f19755fb017650d29e3823cf44a2b5aca1cf90baa36f3152951c0f","error":{"unknown":"check coin daemon logs"}}

ERROR: CheckEquihashSolution(): invalid solution
ERROR: CheckBlockHeader(): Equihash solution invalid

Have you considered that the user might just have used the wrong hash algorithm param when connecting to the pool?

Impossible to accuse a fictional character. It's like accusing Donald Duck
But it is imperative to protect the community even from fictional characters

Give us your real name and identity here in the forum and then we can start the ball rolling

Thanks for the NEW links. We might use them in the next update


DM

There really is a huge need for a windows miner for lowend rigs, it would do wonderful things for the total hashrate, I personnaly have a lot of
6gb 1060 working elsewhere. Maybe not a bad idea to develop our own community miner.

[mazda323f]

Hi to all. I have been working for ZER for 1 months with 4 RX480 AND OPTIMINER 1.2. i will see some different if i work optiminer 2,1,2 or leave it as it is;

[Ginzink]

Optiminer is now a car rental company.
Well, I did not rent anything. I put your freely distriduted software in my fcking computer. I am reverse engineering it righ now. Things are showing that you are stealing about 10% shares on the old versions.
If I confirm this, you're F*CKED!

Wow, if that is true it will cause mayhem I hope for the calm and stability of the coin that it is not true though.
But they do say that all PR is good PR, so maybe it will actually turn out good for Zero when a new miner is available -If the statement is true.

[SoNiC_77Gr]

Hello to everyone!

Planning soon for a rig with four RX 580 8GB and in the near future will be six of them.
It's a good move to go for RX 580? In WTM show a good profit but I don't trust it 100%
I also know that by default these cards give 8-10 H/s for Zero, is that right?

you can get up to 12h/s with bios mod  with rx 580 8gb

I know that with custom bios mod cards will go a little more but this will break the warranty, isn't ?
And as I'm in the beginning of this "world" I'm trying to be in a safe-road..

you can mod it and if anything happens that forces u to RMA just revert back to factory settings. I've never had issues.

Ok, thanks for the info! 

[zeki555]

I'm trying to mine with 6gb 1060 cards on ubuntu, but I keep getting this error:
./optiminer-equihash: error while loading shared libraries libopencl.so.1: cannot open shared object file: no such file or directory

Do you guys know what this means and how to fix this?

[zeki555]

I'm trying to mine with 6gb 1060 cards on ubuntu, but I keep getting this error:
./optiminer-equihash: error while loading shared libraries libopencl.so.1: cannot open shared object file: no such file or directory

Do you guys know what this means and how to fix this?

I downloaded libraries, It tries to connect now but gives the following error:

opencl error: failed to list opencl platforms

[geo25]

hi. i am new and i have a problem optiminer cant see the second card i put the d switch as you see but nothing please help me.

optiminer -s %POOL% -u %USER% -p %PASSWORD% -m 8080 -d 1 -d 2



[2018-01-16 18:17:32.542] [info] Autodetected '--intensity 1' for device 1.
[2018-01-16 18:17:32.544] [info] [GPU1] Device info: {"id": "1/1" "name": "GeForce GTX 1080 Ti" "platform": "Nvidia" "driver": "390.65"}
[2018-01-16 18:17:32.568] [info] Mining target is 0320000000000000000000000000000000000000000000000000000000000000
[2018-01-16 18:17:32.570] [info] Got new work.
[2018-01-16 18:17:32.570] [info] Got new work.
[2018-01-16 18:17:32.722] [info] Connected to zer-eu.forgetop.com:2052.
[2018-01-16 18:17:33.551] [warning] Failed to connect to devfee server! Running in slower '--nodevfee' mode. Make sure the miner can connect to all hosts and no ports are blocked by the firewall.
[2018-01-16 18:17:35.372] [info] [GPU1] Share accepted! (1 / 1)
[2018-01-16 18:17:37.886] [info] [GPU1]  7.8 I/s 16.4 S/s (5s)

[saman9074]

hi. i am new and i have a problem optiminer cant see the second card i put the d switch as you see but nothing please help me.

optiminer -s %POOL% -u %USER% -p %PASSWORD% -m 8080 -d 1 -d 2



[2018-01-16 18:17:32.542] [info] Autodetected '--intensity 1' for device 1.
[2018-01-16 18:17:32.544] [info] [GPU1] Device info: {"id": "1/1" "name": "GeForce GTX 1080 Ti" "platform": "Nvidia" "driver": "390.65"}
[2018-01-16 18:17:32.568] [info] Mining target is 0320000000000000000000000000000000000000000000000000000000000000
[2018-01-16 18:17:32.570] [info] Got new work.
[2018-01-16 18:17:32.570] [info] Got new work.
[2018-01-16 18:17:32.722] [info] Connected to zer-eu.forgetop.com:2052.
[2018-01-16 18:17:33.551] [warning] Failed to connect to devfee server! Running in slower '--nodevfee' mode. Make sure the miner can connect to all hosts and no ports are blocked by the firewall.
[2018-01-16 18:17:35.372] [info] [GPU1] Share accepted! (1 / 1)
[2018-01-16 18:17:37.886] [info] [GPU1]  7.8 I/s 16.4 S/s (5s)

Hi, use:
optiminer -s %POOL% -u %USER% -p %PASSWORD% -m 8080 -d 0 -d 1

good luck

[geo25]

Don't work optiminer recognise hd graphics card of motherboard and stops...

[tsagas_lr]

Optiminer has shut down his IP's for the old versions so we can not see how much he makes on our backs!

[zeki555]

Optiminer has shut down his IP's for the old versions so we can not see how much he makes on our backs!

This miner sucks bigtime! Been trying for hours now to get it working.

[BLT_NEVER]

Optiminer has shut down his IP's for the old versions so we can not see how much he makes on our backs!

This miner sucks bigtime! Been trying for hours now to get it working.

I just noticed he shut them down too. Time to move on until a community supported miner is developed.

[notsure85]

Don't work optiminer recognise hd graphics card of motherboard and stops...

you have to specify correct opencl platform.
difers from system to system and amd/nvidia
look at help with -h