PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[snm777]

so whats up with cl error -11 and -41.

this only started when i installed a 6600XT, the 6700xt in the same rig was fine.

rig is an onda D8P (G4400, 8 gigs ram, 120 gig ssd, 2x g3 evga 850s) with 1080ti, 1070ti, 1070, 6700xt - ran fine on all that for months

using phoenix 5.7b

then added the 6600xt no joy it fails and exits the program.  pcie plugs is connected. i changed slots no joy there either.

installed latest win update 21/h1 (i think have to check but its what win update just installed), amd driver is dated 8/25/2021 so its the latest. swap is 64 gigs.

i know people are mining on the 6600xt, so what am i doing wrong?

edit mining eth


EDIT   switched to nbminer.. works fine with NO other changes. dropped it in and it just ran... so much for phoenixminer

I have a 6700xt that gives the cl error -11 and -41, I believe that this may be because the opencl version was updated to 2.1, and Phoenixminer is expecting 2.0, but that is just a guess based on the researching the error very quickly..  Regardless, the only way i can get it to run, even with 5.7b, is to use the -clKernel 0 setting that 5.7b was supposed to no longer require.   I don't know if I'm missing any performance, and my rig is simple.  Just a 5900x, 16gb of RAM, and a single 6700xt.  The CPU and RAM aren't even overclocked (yet).
 
These are all the switches I have tried after the wallet address, and only the last two work:
-proto 3
 -proto 3 -dagrestart 1 -rvram -1 -eres 0 -altinit
 -proto 3 -dagrestart 1 -rvram -1 -eres 0
-proto 3 -dagrestart 1 -rvram -1 -eres 8
 -proto 3 -dagrestart 1 -rvram -1 -eres 0 -clKernel 0
 -proto 3 -dagrestart 1 -rvram -1 -eres 8 -clKernel 0

I'd love to know if I'm doing something wrong, what performance I'm losing, if any, and what I should try to fix/debug this.

And before someone says "compute mode," there is no separate compute mode on big navi cards. It isn't an option.   Also, I have tried at full standards feeds and speeds, no over or underclocks, the errors are always the same without -clKernel 0.  If I've tried anything else, i can't think of it at the moment

   

[janding]

Unfortunately seems like part of a smearing campaign towards Phoenix miner.For all of you reading these kind of posts from newbies please disregard them and always before clicking the link,hover your mouse over the link to see the complete link.Once you do so you will see this does not lead to the official Phoenix miner website but to an infected Github account.No matter how many times we report these kind of threads these kind of worthless users seem to pop up even more,so just be careful and follow my advice and that of many others which says the same.

Edit:Post removed by moderators and I removed the links.

Curious as to why newbie's have rights to post links in the first place.
This would all stop if users except for members and above could only post links.
I've been on here for years and never had a good reason to post a link and I'd be fine without that privilege.

[Lafu]

Curious as to why newbie's have rights to post links in the first place.
This would all stop if users except for members and above could only post links.
I've been on here for years and never had a good reason to post a link and I'd be fine without that privilege.

Its a knowen thing here now for years , about the Malware Links here in the thread mostly over a year !
Here you can see what kind of links they already got so far !
It was posted in my thread !

Code:

https\\github.com\PhoenixMinerTeam
https\\github.com\PhoenixMlnerDevTeam (L insted of i)
https\\github.com\PhoenixDevTeamMiner
https\\github.com\PhoenixDevMinerTeam
https\\github.com\Phoenix-MinerDev
https\\github.com\PhoenixMiner-TeamDev
https\\github.com\PhoenixDev-Team-Miner
https\\github.com\Phoenix-DevMinerTeam
https\\github.com\PhoenixMiner-Team-Dev/
https\\github.com\Phoenix-Miner-TeamDev/

Guess they focus on phoenix miner because of it's popularity overall and on bitcointalk (one of the top traffic keywords) and because it only recently has an "official" website (https://phoenixminer.info)

Now they changed it to PhoenixDev-Miner-Team

I fighting them and other Malware links now over 2 years , nearly 3 and they using Bots for posting it ,
means if one gets deleted they post with the next hacked or bought Account they have and got.
The only thing we can do about is to report them as soon as possible when you see them.

About a restriction for newbies would be not helping because if real Users want to post a link here on the forum and they cant would be not so good.
Next thing is that the Malware posting Accounts will be changed to other Ranks, we got this all , Hero / Legendary ranks have posted that too.
Just report them and all is fine.

[JayDDee]

About a restriction for newbies would be not helping because if real Users want to post a link here on the forum and they cant would be not so good.
Next thing is that the Malware posting Accounts will be changed to other Ranks, we got this all , Hero / Legendary ranks have posted that too.
Just report them and all is fine.

They need to take action against dormant accounts. Mining pools purge unpaid balances after a time, forums should purge
unused user accounts.

They could also force all links to be transparent so users would always see the real destination. It wouldn't be fool proof because
there will always be fools, but it would help.

[tal0n]

Hello.

I am new on the forum, my name is Christian and I am from Mallorca Spain. Hello!!

I want to find someone can help me.

I have problems starting miner 5.7b on hiveos.

My cards are 6800 non xt.

This is the argument of the problem:

phoenixminer exited (exitcode=139), waiting to cooldown a bit
/hive/miners/phoenixminer/h-run.sh: line 23: 24698 Segmentation fault (core dumped) ./PhoenixMiner

Someone can help me?

Thanks very much for this awesome software miner.

[Exenzy00000]

Hi, I have been using Phoenixminer on Windows 10 for several months but I always encounter an annoying problem with AMD RX 5600 XT: when the card dies, the miner dies too (it closes instantly) so no wathdog works. This happens to me with several 5600 cards, with any setting for at least 4 months and with all subserved versions up to the last one.
I hope you can resolve this as this causes a lot of lost revenue.
Thanks

First, you should check your OC settings/timings for the card, making the system unstable to eliminate it. Sometimes same settings for the same brand/model do not work for all cards.

To eliminate the watchdog issue and downtimes, you need to do the following 3 steps:

1. Add this to your config file or the command line:

Code:

 -wdog 1
 -rmode 2

#-rmode <n>
#   Selects the restart mode when a GPU crashes or freezes: :0:
#   disabled - miner will shut down instead of restarting :1: restart
#   with the same command line options - this is the default :2: reboot
#   (shut down miner and execute "reboot.bat")

2. Create a "reboot.bat" file in your miner's directory with this:

Code:

shutdown /r /t 5 /f
 

This will restart your rig.

3. Set your miner to start automatically when the Windows start.

I already do all this, but in these cases it is useless, wathdog does not activate if Phoenixminer crashing together with the card. It only happens with 5600s. Some 5600s are very unstable.

[tal0n]

Hello.

I am new on the forum, my name is Christian and I am from Mallorca Spain. Hello!!

I want to find someone can help me.

I have problems starting miner 5.7b on hiveos.

My cards are 6800 non xt.

This is the argument of the problem:

phoenixminer exited (exitcode=139), waiting to cooldown a bit
/hive/miners/phoenixminer/h-run.sh: line 23: 24698 Segmentation fault (core dumped) ./PhoenixMiner

Someone can help me?

Thanks very much for this awesome software miner.

Can someone read the script /hive/miners/phoenixminer/h-run.sh: line 23

And tell me what is in the line 23?

Thank you in advance

[der][meister]

...
phoenixminer exited (exitcode=139), waiting to cooldown a bit
/hive/miners/phoenixminer/h-run.sh: line 23: 24698 Segmentation fault (core dumped) ./PhoenixMiner

Someone can help me?
...

Can someone read the script /hive/miners/phoenixminer/h-run.sh: line 23
And tell me what is in the line 23?
Thank you in advance

Wrong Forum mate, ask at HiveOS ... https://forum.hiveos.farm/t/phoenixminer-exited-exitcode-139-waiting-to-cooldown-a-bit-error-how-to-fix/32799

[djtomdabomb]

Hello!

Is there a way to set the accuracy of the time stamp in the remote monitoring data (I can't find an option for this in the readme file) else can the accuracy be improved in the base code?

I'm looking at coding up a dashboard to plot the miner performance stats (rate, temps, fan speeds etc)... ideally I'd pull the data from the remote monitoring url as this is easier to set up than pointing to the log file, but the time stamp is chopped to the minute so it's not accurate enough to plot the data (since there can be multiple results per minute). I think chopping to the second would be adequate.

The alternative is that I just overwrite any existing data with the later data for a specific time stamp, so it just plots the most recent data for that stamp, but it seems a shame to waste perfectly good data.

Thanks!

Claymore's Ethereum Dual miner Manager

been using this manager now for 3.5 years. its in the Claymore zip folder.
no need to create a dashboard as it does everything you want, including editing the config file on the fly, see your rig wattage, see your fan speed, gpu temp, running time, version of phoenix, ethereum stats, how many times your rig restarted. to boot, it can send you a text if the rig is down, you can even reset, restart without having to go to each rig with even more options to list.. its the best free tool for mining with phoenix miner.. take some time to read the phoenix manual.

[vertforgames]

Is official download site down? I get "phoenixminer.info’s server IP address could not be found."

[JayDDee]

Is official download site down? I get "phoenixminer.info’s server IP address could not be found."

You clicked on a phishing link. Only use the links in the first post.

[vertforgames]

Is official download site down? I get "phoenixminer.info’s server IP address could not be found."

You clicked on a phishing link. Only use the links in the first post.

No, I did not, I'm talking about the links in the very first post of this tread. The ones that really point to "phoenixminer.info" site (not phishing github pages). The official domain is not resolving for me. Anyone else??

[Lafu]

Is official download site down? I get "phoenixminer.info’s server IP address could not be found."

When you hover with the mouse over the link you will be see whats the real link is on the left bottom!
As JayDDee already has written the Link was a fake one with Malware when you download everything from there.
I reported the link already and have written also in my thread about it here Report Malware and Suspicious Links here so Mods can take Action !

No, I did not, I'm talking about the links in the very first post of this tread. The ones that really point to "phoenixminer.info" site (not phishing github pages). The official domain is not resolving for me. Anyone else??

Just tried the link and it works for me right !

[JayDDee]

Is official download site down? I get "phoenixminer.info’s server IP address could not be found."

When you hover with the mouse over the link you will be see whats the real link is on the left bottom!
As JayDDee already has written the Link was a fake one with Malware when you download everything from there.
I reported the link already and have written also in my thread about it here Report Malware and Suspicious Links here so Mods can take Action !

No, I did not, I'm talking about the links in the very first post of this tread. The ones that really point to "phoenixminer.info" site (not phishing github pages). The official domain is not resolving for me. Anyone else??

Just tried the link and it works for me right !

It worked for me too, that's why I assumed a phishing link. Could be AV or firewall blocking you, or some other network problem.

Just tried it again...

Index of /downloads
[ICO]   Name   Last modified   Size   Description
[PARENTDIR]   Parent Directory       -    
[DIR]   archive/   2021-05-12 05:56    -    
[DIR]   beta/   2021-08-04 08:43    -    
[DIR]   files/   2021-05-12 06:06    -    
[ ]   PhoenixMiner_5.6d_checksums.txt   2021-05-12 05:57    1.0K   
[ ]   PhoenixMiner_5.6d_Linux.tar.gz   2021-05-12 05:57    5.6M   
[ ]   PhoenixMiner_5.6d_Linux.tar.gz.asc   2021-05-12 05:57    819    
[ ]   PhoenixMiner_5.6d_Windows.zip   2021-05-12 05:58    5.0M   
[ ]   PhoenixMiner_5.6d_Windows.zip.asc   2021-05-12 05:58    819    
[ ]   PhoenixMiner_5.7b_checksums.txt   2021-08-15 03:13    1.0K   
[ ]   PhoenixMiner_5.7b_Linux.tar.gz   2021-08-15 03:13    5.7M   
[ ]   PhoenixMiner_5.7b_Linux.tar.gz.asc   2021-08-15 03:13    819    
[ ]   PhoenixMiner_5.7b_Windows.zip   2021-08-15 03:13    5.0M   
[ ]   PhoenixMiner_5.7b_Windows.zip.asc   2021-08-15 03:13    819    
[ ]   PhoenixMiner_NVRTC_Windows.zip   2021-05-12 05:59    7.7M   
[ ]   PhoenixMiner_NVRTC_Windows.zip.asc   2021-05-12 05:59    819    

[vertforgames]

Is official download site down? I get "phoenixminer.info’s server IP address could not be found."

You clicked on a phishing link. Only use the links in the first post.

No, I did not, I'm talking about the links in the very first post of this tread. The ones that really point to "phoenixminer.info" site (not phishing github pages). The official domain is not resolving for me. Anyone else??

I found the problem!. I use Quad9 Filtered DNS resolver (9.9.9.9) It turns out it mistakenly filtering out the official "phoenixminer.info" domain as a malicious website. This smear campaign against Phoenixminer is getting out of control! Whoever trust this software/website please ask to remove "phoenixminer.info" domain from Blacklist filling this form: https://quad9.net/support/contact

[miner95]

Is official download site down? I get "phoenixminer.info’s server IP address could not be found."

You clicked on a phishing link. Only use the links in the first post.

No, I did not, I'm talking about the links in the very first post of this tread. The ones that really point to "phoenixminer.info" site (not phishing github pages). The official domain is not resolving for me. Anyone else??

I found the problem!. I use Quad9 Filtered DNS resolver (9.9.9.9) It turns out it mistakenly filtering out the official "phoenixminer.info" domain as a malicious website. This smear campaign against Phoenixminer is getting out of control! Whoever trust this software/website please ask to remove "phoenixminer.info" domain from Blacklist filling this form: https://quad9.net/support/contact

Why are you using a DNS level malware protection when you can easily install uBlock Origin in any browser?
Looks like it's only Quad9 that thinks PhoenixMiner is a malicious website because at least all default filters of uBlock Origin doesn't think of that.

[hustleman]

Does anyone know the fix for this error:

"unable to read pool response: an exiting connection was foricbly closed by remote host"

internet connection is good, windows 10, miner shows up on ethermine.org

[shadowoflight]

I deleted epools example, dpools is commented out, and I've set my config, but every time I use start miner, it still uses the default wallet address

help?

5.7b windows

[DMisDM]

I deleted epools example, dpools is commented out, and I've set my config, but every time I use start miner, it still uses the default wallet address

help?

5.7b windows

because you are using the shortcut. the shortcut is for when launching phoenixminer.exe by itself doesn't work.

you need to launch phoenixminer.exe by itself. for it to use the setup in the config.

[ivomm]

Something very strange happened to my 580 card used on my PC with Windows 10. After the last restart, the hashrate dropped from 32 to 26 Mh. Neither Radeon settings nor Windows has any updates, since I turned them off. It is still in compute mode. It seems the problem is that suddenly the -strap X option on Claymore wich I used together with phoenix miner doesn't increase the hashrate. On the contrary, after successful loading it reduces it with 1Mh at least. I tried switching off and on the PC and plugging out the power cable, but nothing changed. I also unistalled and installed the driver in Claymore, still the same.

Edit. With Phoenixminer (without Claymore memory timings) adjusting Memory Timings Level 2 on Radeon Settings I got to 31.1Mh, but still not 32.1Mh. I can live with that of course. But it is weird.