realestone
Legendary
Offline
Activity: 938
Merit: 1000
|
|
August 14, 2013, 10:42:19 PM |
|
8 chip Drillbit Board (including chips) - $300 am i to understand that each chip gets roughly 2GH/s so an 8 chip fully assembled miner will get 8Gh/s?
|
|
|
|
philwho27
Newbie
Offline
Activity: 3
Merit: 0
|
|
August 14, 2013, 11:12:54 PM |
|
8 chip Drillbit Board (including chips) - $300 am i to understand that each chip gets roughly 2GH/s so an 8 chip fully assembled miner will get 8Gh/s? running at stable speeds the 8 chip system will produce about 16GH/s (2*8=16), however the bitfury chips are able to be over clocked to around 2.7GH/s a chip (2.7*8=21.6GH/s). However when these chips are over clocked they become extremely hot requiring extra cooling, running at these high temperatures also increases error rate and decreases lifespan of the product (due to slight imperfections in the wafers themselves).
|
|
|
|
Barntech (OP)
|
|
August 14, 2013, 11:14:24 PM |
|
8 chip Drillbit Board (including chips) - $300 am i to understand that each chip gets roughly 2GH/s so an 8 chip fully assembled miner will get 8Gh/s? 2 X 8 = 16 A basic stable rate of 16 GH/s with potential overclocking up to 21.6 GH/s Edit: Thanks Philwoo. Beat me to it.
|
|
|
|
Barntech (OP)
|
|
August 14, 2013, 11:18:31 PM |
|
I have been in contact with Barntech and will be visiting as soon as there is something to see & photograph. This may be as little as a blank PCB - as due to the urgency of getting things moving, I figure the sooner we get any independent verification that these guys are on track the sooner the group buy will be filled.
I was just going to suggest something like that. After all the scams and such, it helps both parties involved: - The fabs are seen as legit and get more business. - The buyers (us) feel more comfy and order. The verification of ID here by a member is a great first step, but it is just ID and we are talking tens, hundreds and sometimes millions of dollars. I mean, think about it, if a person has a business and advertises, often there is an address, picture of the owner, diplomas/certs., etc. The more information the more trust. I'm not saying this against or for anyone, just mentioning it here as I'm thinking about this GB. Again, it benefits everyone involved. Thx, IAS Julz is going to come visit us once we have a prototype to show off. I also extend the invite to anyone else in the Sydney area who wants to come by and say hello / check out what were up to. Barntech
|
|
|
|
lajz99
|
|
August 14, 2013, 11:24:01 PM |
|
Maybe you could host a Google hangouts or something like that for those who have bought in? That would be pretty sweet!
|
|
|
|
realestone
Legendary
Offline
Activity: 938
Merit: 1000
|
|
August 14, 2013, 11:30:48 PM |
|
8 chip Drillbit Board (including chips) - $300 am i to understand that each chip gets roughly 2GH/s so an 8 chip fully assembled miner will get 8Gh/s? 2 X 8 = 16 A basic stable rate of 16 GH/s with potential overclocking up to 21.6 GH/s Edit: Thanks Philwoo. Beat me to it. oops miscalculation lol
|
|
|
|
Barntech (OP)
|
|
August 14, 2013, 11:38:27 PM |
|
I'm talking about pre-orders for October! They used to be listed on the site for anyone to buy and now they are no longer available to PRE-order. One real of chips does not constitute a 'large order' anyway. This is a reasonable question, unless Barntech has some other arrangement made.
I am aware that the reels are no longer on the Megabigpower site. There are changes going on over there that is their information to tell, not mine. We are looking good for our chips though. I am in communication with Dave from Megabigpower and will be making a deposit soon to lock the reel down. I'll keep you all updated on the progress of this. Barntech
|
|
|
|
Barntech (OP)
|
|
August 14, 2013, 11:39:32 PM |
|
Maybe you could host a Google hangouts or something like that for those who have bought in? That would be pretty sweet!
Nice idea Lajz. Maybe we will.
|
|
|
|
Barntech (OP)
|
|
August 14, 2013, 11:43:03 PM |
|
Hey there, Really interest in the drillbit thumbs. Are they similar to the asicminer units but with bitfury chips? Would my current set up of a 10 port usb powered hub and small fan be ok to use?
Also, Just looked at the paypal buy page and there doesn`t seem to be a selection for the thumbs..
Thanks guys, this project looks awesome...
Yes, The Drillbit Thumbs are just like the Block Erupter USBs but with a Bitfury chip at ~2Gh/s. Yes your current hub will run them if it happily runs the ASICminer ones. I have just added a PAYPAL button for the thumbs so feel free to jump on there and order. Cheers. Barntech
|
|
|
|
Barntech (OP)
|
|
August 14, 2013, 11:52:53 PM |
|
Going to preorder one soon, as long as he could clear up how the preorder of the chips goes? So...99 usd is only for one chip USB while 300 is for 8 chip assembled board? Yes those are the prices. You have the option to pay for the chips now and the assembly later, or pay for both now. You can pay via BTC to the address on the page and fill in the email form so i can track your payment, or you can pay via paypal at http://drillbitsystem.comCheers.
|
|
|
|
realestone
Legendary
Offline
Activity: 938
Merit: 1000
|
|
August 15, 2013, 12:34:54 AM |
|
Going to preorder one soon, as long as he could clear up how the preorder of the chips goes? So...99 usd is only for one chip USB while 300 is for 8 chip assembled board? Yes those are the prices. You have the option to pay for the chips now and the assembly later, or pay for both now. You can pay via BTC to the address on the page and fill in the email form so i can track your payment, or you can pay via paypal at http://drillbitsystem.comCheers. considering buying a few 8 chip miners is the tentative date these will start shipping october?
|
|
|
|
Barntech (OP)
|
|
August 15, 2013, 01:10:52 AM |
|
Going to preorder one soon, as long as he could clear up how the preorder of the chips goes? So...99 usd is only for one chip USB while 300 is for 8 chip assembled board? Yes those are the prices. You have the option to pay for the chips now and the assembly later, or pay for both now. You can pay via BTC to the address on the page and fill in the email form so i can track your payment, or you can pay via paypal at http://drillbitsystem.comCheers. considering buying a few 8 chip miners is the tentative date these will start shipping october? Yes. Late October, early November is our anticipated delivery time.
|
|
|
|
vulgartrendkill
|
|
August 15, 2013, 06:34:17 AM |
|
I've just ordered 3 thumbs (6gh/s?) via paypal.
really looking forward to this.
Thanks
|
|
|
|
Its About Sharing
Legendary
Offline
Activity: 1442
Merit: 1000
Antifragile
|
|
August 15, 2013, 07:08:10 AM |
|
I have been in contact with Barntech and will be visiting as soon as there is something to see & photograph. This may be as little as a blank PCB - as due to the urgency of getting things moving, I figure the sooner we get any independent verification that these guys are on track the sooner the group buy will be filled.
I was just going to suggest something like that. After all the scams and such, it helps both parties involved: - The fabs are seen as legit and get more business. - The buyers (us) feel more comfy and order. The verification of ID here by a member is a great first step, but it is just ID and we are talking tens, hundreds and sometimes millions of dollars. I mean, think about it, if a person has a business and advertises, often there is an address, picture of the owner, diplomas/certs., etc. The more information the more trust. I'm not saying this against or for anyone, just mentioning it here as I'm thinking about this GB. Again, it benefits everyone involved. Thx, IAS Julz is going to come visit us once we have a prototype to show off. I also extend the invite to anyone else in the Sydney area who wants to come by and say hello / check out what were up to. Barntech Great news Barntech, I noticed the post up there. This will attract more people. Benefits everyone. Good luck!
|
BTC = Black Swan. BTC = Antifragile - "Some things benefit from shocks; they thrive and grow when exposed to volatility, randomness, disorder, and stressors and love adventure, risk, and uncertainty. Robust is not the opposite of fragile.
|
|
|
jtkanpp2
Newbie
Offline
Activity: 23
Merit: 0
|
|
August 15, 2013, 03:09:29 PM |
|
Ok I just purchased 4 fully assemebled boards. Looking forward to this.
|
|
|
|
vulgartrendkill
|
|
August 15, 2013, 05:01:08 PM |
|
Any rough specs on the the larger 8 chip boards? I think I like to have a couple in my mining "cupboard" Thanks
|
|
|
|
ryanb
Legendary
Offline
Activity: 1148
Merit: 1000
|
|
August 15, 2013, 11:13:51 PM |
|
do we have to run the drillbtit overclocked or can they run at stock speed to save heat/electric cost?
|
|
|
|
MRKLYE
Legendary
Offline
Activity: 1358
Merit: 1003
Designer - Developer
|
|
August 15, 2013, 11:24:01 PM |
|
Was considering investing into a one of those USB Drillbit systems.. Went to use your website.. NOPE.
You guys need a hand with web design..? Your site just costed you a sale.. And my guess would be more then just i was turned off by the 20 second to build site. :/
I love the idea of the product.. Just highly doubting legitimacy.
|
|
|
|
milkbottlec
Member
Offline
Activity: 95
Merit: 10
|
|
August 15, 2013, 11:45:39 PM |
|
Have you figure out it yet? And I wanna ask, for the 8 chip board, what power supply and cooling do we need for it? And how does this connect? Compare to the USB thumb drive
|
Will be handling Drillbit System UK/EU replacement components soon (waiting to confirm details, stay tunes) If I helped you and could pop me some treats for this Christmas, donate some BTC to: 1QEhKaUnFoEBaWmXsrE5AUvbAt95254DXr
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
August 16, 2013, 12:15:50 AM |
|
Can you ship to the US Approximate cost On your website there is no mention of "available units",how do we know you aren't "sold out" & we'll be put in a later que Your design,price & release date look very good to me,but..........my questions need an answer before commiting I'll have more questions later,I'm sure I'll be watching VERY closely Thanks Barntech !!!!!!!!!!
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
|