Wolke
Legendary
Offline
Activity: 966
Merit: 1000
|
|
April 30, 2014, 10:05:15 AM Last edit: April 30, 2014, 10:18:16 AM by Wolke |
|
so i test the new clocking options, these are the results that i get:
power save ultra ~710 Watt = ~740 GH/s 0,95 Watt per GH/s
power save moderate ~770 Watt = ~808 GH/s ~0,95 Watt per GH/s
power save light ~940 Watt = ~940 GH/s ~1 Watt per GH/s
normale mode ~1040 Watt = ~1020 GH/s ~1,01 Watt per GH/s
turbo light ~1140 Watt = ~1080 GH/s ~1,05 Watt per GH/s
turbo moderate ~1330 Watt = ~1140 GH/s ~1,16 Watt per GH/s
turbo extreme not testet, because the system starts for a second and than go down... i think it can be a problem with the psu, i musst test it
the HW in alls mode are under 1 % -> i get this result with the tool "cgremote"...
|
|
|
|
Schinder75
Member
Offline
Activity: 117
Merit: 10
|
|
April 30, 2014, 10:17:42 AM |
|
so i test the new clocking options, these are the results that i get:
power save ultra ~710 Watt = ~740 GH/s 0,95 Watt per GH/s
power save moderate ~770 Watt = ~808 GH/s ~0,95 Watt per GH/s
power save light ~940 Watt = ~940 GH/s ~1 Watt per GH/s
normale mode ~1040 Watt = ~1020 GH/s ~1,01 Watt per GH/s
turbo light ~1140 Watt = ~1080 GH/s ~1,05 Watt per GH/s
turbo moderate ~1330 Watt = ~1140 GH/s ~1,16 Watt per GH/s
turbo extreme not testet
the HW in alls mode are under 1 % -> i get this result with the tool "cgremote"...
Thanks a lot for information @wolke. You tested it with a full populated CoinDesk (1TH)? I have a 4 module coindesk with a psu of 1000W (original from bitmine). If I take the numbers of power consumption above, this is what I get: 4 modules in turbo moderate -> 1330W@5modules -> 1064W@4modules -> my delivered psu cannot handle it! So I just can run the miner in "turbo light" mode and get an additional ~5% hashrate increase. I will check it today, if the values are correct what I believe, it's another fail from bitmine for me. I'm so sad of all the stuff coming from switzerland.
|
|
|
|
Wolke
Legendary
Offline
Activity: 966
Merit: 1000
|
|
April 30, 2014, 10:21:36 AM |
|
so i test the new clocking options, these are the results that i get:
power save ultra ~710 Watt = ~740 GH/s 0,95 Watt per GH/s
power save moderate ~770 Watt = ~808 GH/s ~0,95 Watt per GH/s
power save light ~940 Watt = ~940 GH/s ~1 Watt per GH/s
normale mode ~1040 Watt = ~1020 GH/s ~1,01 Watt per GH/s
turbo light ~1140 Watt = ~1080 GH/s ~1,05 Watt per GH/s
turbo moderate ~1330 Watt = ~1140 GH/s ~1,16 Watt per GH/s
turbo extreme not testet, because the system starts for a second and than go down... i think it can be a problem with the psu, i musst test it
the HW in alls mode are under 1 % -> i get this result with the tool "cgremote"...
Thanks a lot for information @wolke. You tested it with a full populated CoinDesk (1TH)? I have a 4 module coindesk with a psu of 1000W (original from bitmine). If I take the numbers of power consumption above, this is what I get: 4 modules in turbo moderate -> 1330W@5modules -> 1064W@4modules -> my delivered psu cannot handle it! So I just can run the miner in "turbo light" mode and get an additional ~5% hashrate increase. I will check it today, if the values are correct what I believe, it's another fail from bitmine for me. I'm so sad of all the stuff coming from switzerland. no problem, yes this test was with a full CoinCraft Desk 1TH/s....
|
|
|
|
giorgiomassa (OP)
|
|
April 30, 2014, 10:39:20 AM |
|
so i test the new clocking options, these are the results that i get:
power save ultra ~710 Watt = ~740 GH/s 0,95 Watt per GH/s
power save moderate ~770 Watt = ~808 GH/s ~0,95 Watt per GH/s
power save light ~940 Watt = ~940 GH/s ~1 Watt per GH/s
normale mode ~1040 Watt = ~1020 GH/s ~1,01 Watt per GH/s
turbo light ~1140 Watt = ~1080 GH/s ~1,05 Watt per GH/s
turbo moderate ~1330 Watt = ~1140 GH/s ~1,16 Watt per GH/s
turbo extreme not testet, because the system starts for a second and than go down... i think it can be a problem with the psu, i musst test it
the HW in alls mode are under 1 % -> i get this result with the tool "cgremote"...
Thank you Wolke for this detailed report, can you tell me what PSU do you have mounted in the unit?
|
|
|
|
SwissMiner
|
|
April 30, 2014, 10:51:01 AM |
|
Thank you ..
WERE ARE THE REFUND ?THANK YOU FOR ANSWER
|
.. bitcoin's make the world go around .. world go around .. world go around ..
|
|
|
Wolke
Legendary
Offline
Activity: 966
Merit: 1000
|
|
April 30, 2014, 10:54:02 AM |
|
so i test the new clocking options, these are the results that i get:
power save ultra ~710 Watt = ~740 GH/s 0,95 Watt per GH/s
power save moderate ~770 Watt = ~808 GH/s ~0,95 Watt per GH/s
power save light ~940 Watt = ~940 GH/s ~1 Watt per GH/s
normale mode ~1040 Watt = ~1020 GH/s ~1,01 Watt per GH/s
turbo light ~1140 Watt = ~1080 GH/s ~1,05 Watt per GH/s
turbo moderate ~1330 Watt = ~1140 GH/s ~1,16 Watt per GH/s
turbo extreme not testet, because the system starts for a second and than go down... i think it can be a problem with the psu, i musst test it
the HW in alls mode are under 1 % -> i get this result with the tool "cgremote"...
Thank you Wolke for this detailed report, can you tell me what PSU do you have mounted in the unit? hehe no problem...i was interested what is possible.... i bought the psu's from LEPA -> G1600-MA-EU ( http://www.lepatek.de/g1600/ ), i bought it because i got this psu for a special price, i paid only 219 € inkl. tax for each...
|
|
|
|
Gogreen
|
|
April 30, 2014, 10:56:27 AM |
|
Sorry I just mess up the ip and I cannot access the web . I try to connect directly to the pc but no go. Where can I download a new firmware and load into the new sd card or how? Pls help thanks
|
Bitcoin mining Antminer s7 4.7 TH Used in Good Condition Best Offer Prices @ ebay seller order directly here https://goo.gl/uaoh1r. Bitcoin payment optional.
|
|
|
giorgiomassa (OP)
|
|
April 30, 2014, 10:58:16 AM |
|
so i test the new clocking options, these are the results that i get:
power save ultra ~710 Watt = ~740 GH/s 0,95 Watt per GH/s
power save moderate ~770 Watt = ~808 GH/s ~0,95 Watt per GH/s
power save light ~940 Watt = ~940 GH/s ~1 Watt per GH/s
normale mode ~1040 Watt = ~1020 GH/s ~1,01 Watt per GH/s
turbo light ~1140 Watt = ~1080 GH/s ~1,05 Watt per GH/s
turbo moderate ~1330 Watt = ~1140 GH/s ~1,16 Watt per GH/s
turbo extreme not testet, because the system starts for a second and than go down... i think it can be a problem with the psu, i musst test it
the HW in alls mode are under 1 % -> i get this result with the tool "cgremote"...
Thank you Wolke for this detailed report, can you tell me what PSU do you have mounted in the unit? hehe no problem...i was interested what is possible.... i bought the psu's from LEPA -> G1600-MA-EU ( http://www.lepatek.de/g1600/ ), i bought it because i get this psu for a special price, i paid only 219 € inkl. tax for each... Ok, the PSU looks good in wattage but possibly you have not equally distributed the 12V rails available on the 5 slots. Can you please make sure from the manufacturer's manual that each card would be able to get up to 30-35A each?
|
|
|
|
glen123
Legendary
Offline
Activity: 1028
Merit: 1000
|
|
April 30, 2014, 11:04:03 AM |
|
so i test the new clocking options, these are the results that i get:
power save ultra ~710 Watt = ~740 GH/s 0,95 Watt per GH/s
power save moderate ~770 Watt = ~808 GH/s ~0,95 Watt per GH/s
power save light ~940 Watt = ~940 GH/s ~1 Watt per GH/s
normale mode ~1040 Watt = ~1020 GH/s ~1,01 Watt per GH/s
turbo light ~1140 Watt = ~1080 GH/s ~1,05 Watt per GH/s
turbo moderate ~1330 Watt = ~1140 GH/s ~1,16 Watt per GH/s
turbo extreme not testet, because the system starts for a second and than go down... i think it can be a problem with the psu, i musst test it
the HW in alls mode are under 1 % -> i get this result with the tool "cgremote"...
Thank you Wolke for this detailed report, can you tell me what PSU do you have mounted in the unit? hehe no problem...i was interested what is possible.... i bought the psu's from LEPA -> G1600-MA-EU ( http://www.lepatek.de/g1600/ ), i bought it because i get this psu for a special price, i paid only 219 € inkl. tax for each... Ok, the PSU looks good in wattage but possibly you have not equally distributed the 12V rails available on the 5 slots. Can you please make sure from the manufacturer's manual that each card would be able to get up to 30-35A each? Sorry Giorgio it ISNT look good at Wattage ! You clearly Says on your Homepage : Hashing speed in power-save mode of 150 / 300 / 450 / 600 / 750 GH/s. Hashing speed in turbo mode up to 300 / 600 / 900 / 1200 / 1500 GH/s. Total maximum power usage in power-save mode of 80 / 160 / 240 / 320 / 400 W. Total maximum power usage in turbo mode: 375 / 750 / 1125 / 1500 / 1875 W. Thats why i choose the 1 THs System cause if its to bad to mine ( Diff ) i will downclock an get 750GHS with only 400W out of the Wall And THIS isnt ! Greetz Glen
|
|
|
|
dplusf
|
|
April 30, 2014, 11:05:51 AM |
|
Thank you ..
WERE ARE THE REFUND ?THANK YOU FOR ANSWER+1
|
|
|
|
spiccioli
Legendary
Offline
Activity: 1378
Merit: 1003
nec sine labore
|
|
April 30, 2014, 11:06:17 AM |
|
Giorgio,
instead of wasting time here, I've been waiting for a refund for more than 40 days now, do I need to file a bankruptcy request to get back my money?
spiccioli
|
|
|
|
dplusf
|
|
April 30, 2014, 11:09:05 AM |
|
Giorgio,
instead of wasting time here, I've been waiting for a refund for more than 40 days now, do I need to file a bankruptcy request to get back my money?
spiccioli
were are you located? if i dont get my money back within THEIR Timeframe i will drive by. It is only 4 hours away.
|
|
|
|
spiccioli
Legendary
Offline
Activity: 1378
Merit: 1003
nec sine labore
|
|
April 30, 2014, 11:17:28 AM |
|
Giorgio,
instead of wasting time here, I've been waiting for a refund for more than 40 days now, do I need to file a bankruptcy request to get back my money?
spiccioli
were are you located? if i dont get my money back within THEIR Timeframe i will drive by. It is only 4 hours away. And when you're there what are you going to do? What advantage gives you a trip to their offices? spiccioli
|
|
|
|
dplusf
|
|
April 30, 2014, 11:21:03 AM |
|
Giorgio,
instead of wasting time here, I've been waiting for a refund for more than 40 days now, do I need to file a bankruptcy request to get back my money?
spiccioli
were are you located? if i dont get my money back within THEIR Timeframe i will drive by. It is only 4 hours away. And when you're there what are you going to do? What advantage gives you a trip to their offices? spiccioli good question. If that case will be, i think i will answers why i hav'nt get my money back within the timeframe? if they dont want to talk with me then it is no excuse anymore. than their are official scammers. and the world need to know.
|
|
|
|
spiccioli
Legendary
Offline
Activity: 1378
Merit: 1003
nec sine labore
|
|
April 30, 2014, 11:24:41 AM |
|
Giorgio,
instead of wasting time here, I've been waiting for a refund for more than 40 days now, do I need to file a bankruptcy request to get back my money?
spiccioli
were are you located? if i dont get my money back within THEIR Timeframe i will drive by. It is only 4 hours away. And when you're there what are you going to do? What advantage gives you a trip to their offices? spiccioli good question. If that case will be, i think i will answers why i hav'nt get my money back within the timeframe? if they dont want to talk with me then it is no excuse anymore. than their are official scammers. and the world need to know. They're fraudsters and liars without the need for any more trips to their offices. They're not refunding their customers breaching their own TOS!!What do you need more to be sure that they're fraudsters? To see Giorgio in person laughing at you? spiccioli
|
|
|
|
|
dplusf
|
|
April 30, 2014, 11:29:14 AM |
|
spicoli and swissminer: you are both right.
|
|
|
|
Wolke
Legendary
Offline
Activity: 966
Merit: 1000
|
|
April 30, 2014, 11:30:59 AM |
|
so i test the new clocking options, these are the results that i get:
power save ultra ~710 Watt = ~740 GH/s 0,95 Watt per GH/s
power save moderate ~770 Watt = ~808 GH/s ~0,95 Watt per GH/s
power save light ~940 Watt = ~940 GH/s ~1 Watt per GH/s
normale mode ~1040 Watt = ~1020 GH/s ~1,01 Watt per GH/s
turbo light ~1140 Watt = ~1080 GH/s ~1,05 Watt per GH/s
turbo moderate ~1330 Watt = ~1140 GH/s ~1,16 Watt per GH/s
turbo extreme not testet, because the system starts for a second and than go down... i think it can be a problem with the psu, i musst test it
the HW in alls mode are under 1 % -> i get this result with the tool "cgremote"...
Thank you Wolke for this detailed report, can you tell me what PSU do you have mounted in the unit? hehe no problem...i was interested what is possible.... i bought the psu's from LEPA -> G1600-MA-EU ( http://www.lepatek.de/g1600/ ), i bought it because i get this psu for a special price, i paid only 219 € inkl. tax for each... Ok, the PSU looks good in wattage but possibly you have not equally distributed the 12V rails available on the 5 slots. Can you please make sure from the manufacturer's manual that each card would be able to get up to 30-35A each? year thats the problem... at the moment i use 4 rails from the psu -> because 4 rails come with ready pci'e connectors.... i know that this is the problem, but i don't know how to build the requird connector :-( ....
can you help ?
|
|
|
|
spiccioli
Legendary
Offline
Activity: 1378
Merit: 1003
nec sine labore
|
|
April 30, 2014, 11:31:35 AM |
|
I don't speak German, sadly, and I'm not sure that starting a legal cause without legal assistance from a Swiss lawyer is a smart idea. spiccioli
|
|
|
|
glen123
Legendary
Offline
Activity: 1028
Merit: 1000
|
|
April 30, 2014, 11:35:57 AM |
|
so i test the new clocking options, these are the results that i get:
power save ultra ~710 Watt = ~740 GH/s 0,95 Watt per GH/s
power save moderate ~770 Watt = ~808 GH/s ~0,95 Watt per GH/s
power save light ~940 Watt = ~940 GH/s ~1 Watt per GH/s
normale mode ~1040 Watt = ~1020 GH/s ~1,01 Watt per GH/s
turbo light ~1140 Watt = ~1080 GH/s ~1,05 Watt per GH/s
turbo moderate ~1330 Watt = ~1140 GH/s ~1,16 Watt per GH/s
turbo extreme not testet, because the system starts for a second and than go down... i think it can be a problem with the psu, i musst test it
the HW in alls mode are under 1 % -> i get this result with the tool "cgremote"...
Thank you Wolke for this detailed report, can you tell me what PSU do you have mounted in the unit? hehe no problem...i was interested what is possible.... i bought the psu's from LEPA -> G1600-MA-EU ( http://www.lepatek.de/g1600/ ), i bought it because i get this psu for a special price, i paid only 219 € inkl. tax for each... Ok, the PSU looks good in wattage but possibly you have not equally distributed the 12V rails available on the 5 slots. Can you please make sure from the manufacturer's manual that each card would be able to get up to 30-35A each? year thats the problem... at the moment i use 4 rails from the psu -> because 4 rails come with ready pci'e connectors.... i know that this is the problem, but i don't know how to build the requird connector :-( ....
can you help ? Hi Wolke. can you only for Testing choose 4 Units ( 800GHs ) , i really intrested for the Wattage . My miner still in Delivering and i get mine HW hopefully on Friday , but spend 3 Days in Amsterdam then. Greetz Glen
|
|
|
|
|