Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
December 12, 2013, 07:36:12 AM Last edit: December 12, 2013, 07:57:34 AM by Zich |
|
Same here all us wasting time dude for free you know it right?
My comment was not meant to be directed at the lack of proper documentation (though technobit makes money selling the devices, they should in theory also provide support). It was directed at myself - I had a couple of weeks between ordering the devices and receiving them and I could not make sure that I have a version of the software that actually works. Sorry if I offended you. I do not need the tp-link because: 1. If I order it now, it will be a day of two before I receive it. 2. The current PC I use for mining uses something like 30W anyway. Even if I used a different PC (that uses more power), it would still probably not pay off the price of the tp-link and I can use that PC for other things (like stats and control (remotely rebooting the miners) and so on) that could be a problem on the underpowered router (not that the PC I use is that more powerful). 3. My current control PC has TV output, so I do not have to lug a monitor to the basement to see its console (in case it crashes). Thanks, Zich, I am following those instructions right now, we'll see if this works (I currently have my Single connected to a raspberry and the hex boards to the PC in question). Of course it will work Actually you can buy TPLINK TL-MR3020 in your local favorite computer shop & flash the firmware using image that available on techno BTCit download page. I don't own HEX16B but my HEX16A work great on Pi. Forget to mention you if you want to overclock the board you need to add sudo ./cgminer --hexminerb-voltage 900 --hexminerb-options 16:540
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
December 12, 2013, 07:44:38 AM |
|
Finlay - Build two instances one for HEX boards (enable hex boards only) one for whatever you want not patched and run them simultaneously - two instances. USBPOOLING is disabled (commented out and thread will never start) and there is a big chance bfl not to work if it uses cancelable USB transfers and so on
|
|
|
|
Pentium100
|
|
December 12, 2013, 08:58:54 AM |
|
It finally compiled and works now. And my single CPU control PC is at load 2.5. I will build a faster PC for this (just replaced bad caps on the motherboard) and it should work great. I will try overclocking.
How do I specify to cgminer that it should not use the bfl device? I could then run bfgminer for the Single.
|
1GStzEi48CnQN6DgR1s3uAzB8ucuwdcvig
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
December 12, 2013, 09:07:06 AM |
|
It finally compiled and works now. And my single CPU control PC is at load 2.5. I will build a faster PC for this (just replaced bad caps on the motherboard) and it should work great. I will try overclocking.
How do I specify to cgminer that it should not use the bfl device? I could then run bfgminer for the Single.
As i sad ./autogen.sh --enable-heminerb Only. you will see BFL disabled in the summary Enable only what you need. About CPU usage - I have seen Tplink Cpu at load 45% with 10 HEXA boards....can you post top output? you will see what is loading your cpu but if cgminer was compiled for HEX boards only it shall load 2-5% you cpu assuming you do have one board only
|
|
|
|
cbrboot
Newbie
Offline
Activity: 17
Merit: 0
|
|
December 12, 2013, 09:16:11 AM |
|
I finally got my order! I see a lot of default entry's in the tplink configuration of cgminer, is there any manual on how to safely overclock it?
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
December 12, 2013, 09:19:37 AM Last edit: December 12, 2013, 09:29:55 AM by loshia |
|
I finally got my order! I see a lot of default entry's in the tplink configuration of cgminer, is there any manual on how to safely overclock it?
It is overclocked already to safest value. Check voltage to be 900 and clock 540. Do not go above 540 clock it is not working. Try voltage if you feel brave
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
December 12, 2013, 09:27:12 AM |
|
I finally got my order! I see a lot of default entry's in the tplink configuration of cgminer, is there any manual on how to safely overclock it?
It is overclocked already to safest value. Check voltage to be 900 and clock 540. Do not go above 540 clock it is not working. Try voltage if you feel brave Changelog HEX16A(Avalon1): Best results 7.4-7.7 Gh/s (16 chips) in terms of stability and clocking are observed at 1460mV core voltage + 480 MHz Clock.
HEX16B(Bitfury): Best results 44.5-45 Gh/s (16 chips) in terms of stability and clocking are observed at 900mV core voltage + 540 Clock. Do not go above 540 it is not working!
HEX16C(Avalon2): To be tested with 10 chips - 1100mV core voltage + 1500 MHz Clock.
|
|
|
|
Pentium100
|
|
December 12, 2013, 09:29:33 AM |
|
It finally compiled and works now. And my single CPU control PC is at load 2.5. I will build a faster PC for this (just replaced bad caps on the motherboard) and it should work great. I will try overclocking.
How do I specify to cgminer that it should not use the bfl device? I could then run bfgminer for the Single.
As i sad ./autogen.sh --enable-heminerb Only. you will see BFL disabled in the summary Enable only what you need. About CPU usage - I have seen Tplink Cpu at load 45% with 10 HEXA boards....can you post top output? you will see what is loading your cpu but if cgminer was compiled for HEX boards only it shall load 2-5% you cpu assuming you do have one board only OK, I will recompile it when I transfer it to the faster PC. top output: top - 11:28:00 up 1 day, 20:21, 5 users, load average: 2.98, 3.22, 2.84 Tasks: 71 total, 2 running, 69 sleeping, 0 stopped, 0 zombie %Cpu(s): 43.9 us, 46.9 sy, 0.0 ni, 9.0 id, 0.0 wa, 0.0 hi, 0.2 si, 0.0 st KiB Mem: 60012 total, 58280 used, 1732 free, 3564 buffers KiB Swap: 123900 total, 11712 used, 112188 free, 31900 cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 24097 root 20 0 156m 5656 2668 R 85.7 9.4 27:58.16 cgminer 24142 root 20 0 4424 1388 1032 R 5.0 2.3 0:01.59 top 9632 root 20 0 9200 1228 932 S 0.7 2.0 0:11.84 sshd 1 root 20 0 2192 536 508 S 0.2 0.9 0:29.06 init ...
The PC is just slow. It was enough for the Single, but obviously not enough for these boards. The CPU is Cyrix MediaGX 233MHz. I have another PC with Celeron 1GHz (TDP 30W), will use that later.
|
1GStzEi48CnQN6DgR1s3uAzB8ucuwdcvig
|
|
|
Gator-hex
|
|
December 12, 2013, 11:58:32 AM |
|
Has anyone found any limit to the number of Hex16b you can USB to the TL-MR3020 router?
|
|
|
|
simoncc
Newbie
Offline
Activity: 49
Merit: 0
|
|
December 12, 2013, 12:05:38 PM |
|
I finally got my order! I see a lot of default entry's in the tplink configuration of cgminer, is there any manual on how to safely overclock it?
Well…l am still waiting for mine, and no tracking number there in my order history…
|
|
|
|
loshia
Legendary
Offline
Activity: 1610
Merit: 1000
|
|
December 12, 2013, 12:20:28 PM |
|
Has anyone found any limit to the number of Hex16b you can USB to the TL-MR3020 router?
Unlimited I am joking from a point on i think performance will suffer But most probably 9-15 will be ok. If you happen to see performance lost just buy second tplink or use Linux PC in that case
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
December 12, 2013, 12:24:39 PM Last edit: December 12, 2013, 12:35:59 PM by Zich |
|
I finally got my order! I see a lot of default entry's in the tplink configuration of cgminer, is there any manual on how to safely overclock it?
Well…l am still waiting for mine, and no tracking number there in my order history… I fear that your HEX16B is being used by speedy employee to mining right now. They used my HEX16A for almost 3 week Just Kidding. loshia force me to do it
|
|
|
|
wuzamarine
Sr. Member
Offline
Activity: 264
Merit: 250
derp
|
|
December 12, 2013, 12:38:25 PM |
|
I would NOT do business with Technobit.eu. This damn fool will rob you blind. He disappeared with my $1k a month ago. Just vanished.
|
|
|
|
simoncc
Newbie
Offline
Activity: 49
Merit: 0
|
|
December 12, 2013, 12:46:51 PM |
|
I finally got my order! I see a lot of default entry's in the tplink configuration of cgminer, is there any manual on how to safely overclock it?
Well…l am still waiting for mine, and no tracking number there in my order history… I fear that your HEX16B is being used by speedy employee to mining right now. They used my HEX16A for almost 3 week Just Kidding. loshia force me to do it Oh… This is my first time to order HEX16B, and I want to know how long it takes to ship from there to me...
|
|
|
|
marto74 (OP)
|
|
December 12, 2013, 12:47:50 PM |
|
I would NOT do business with Technobit.eu. This damn fool will rob you blind. He disappeared with my $1k a month ago. Just vanished.
I'm here just busy order ref please
|
|
|
|
marto74 (OP)
|
|
December 12, 2013, 12:48:49 PM |
|
I finally got my order! I see a lot of default entry's in the tplink configuration of cgminer, is there any manual on how to safely overclock it?
Well…l am still waiting for mine, and no tracking number there in my order history… I fear that your HEX16B is being used by speedy employee to mining right now. They used my HEX16A for almost 3 week Just Kidding. loshia force me to do it Oh… This is my first time to order HEX16B, and I want to know how long it takes to ship from there to me... Now you can order with January shipment
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
|
December 12, 2013, 12:56:18 PM |
|
Oh… This is my first time to order HEX16B, and I want to know how long it takes to ship from there to me...
About 3-4 days if using DHL or UPS express saver. Maybe you can ask marto by giving order reference & order date. You see that marto just thought that you are just want to order not already order I hope all of techno BTCit customer will stated the order reference & order date when asking about order status to make it more quick & easy
|
|
|
|
simoncc
Newbie
Offline
Activity: 49
Merit: 0
|
|
December 12, 2013, 01:11:49 PM |
|
I finally got my order! I see a lot of default entry's in the tplink configuration of cgminer, is there any manual on how to safely overclock it?
Well…l am still waiting for mine, and no tracking number there in my order history… I fear that your HEX16B is being used by speedy employee to mining right now. They used my HEX16A for almost 3 week Just Kidding. loshia force me to do it Oh… This is my first time to order HEX16B, and I want to know how long it takes to ship from there to me... Now you can order with January shipment Yes, l like to place another order, but the first one is not coming, and I have to know how long it takes to ship to me. So Martin, go go go
|
|
|
|
berny81
|
|
December 12, 2013, 01:22:13 PM |
|
@marto74, i try to write here because with mail to support and private message i have no response and i see that you read this treadh. i receive my order YMPWFNJVE of 3 nanofury usb but 1 of them is not working.on windows i see it on device manager and on linux i see as microchip device, but bfgminer don't recognize it and led remain off. i made all possible try but 1 of them is dead what can i do?
|
|
|
|
simoncc
Newbie
Offline
Activity: 49
Merit: 0
|
|
December 12, 2013, 01:34:17 PM |
|
Hi Marto74, this is mine: Order Reference EVWMJYXQI -- placed on 2013-11-20 Please, do me a favor to tell me about my order status. Thanks
|
|
|
|
|