[ANN][GRA] Graincoin - New PoW/PoS coin | Fast, secure | Version 1.5 Released!

[Jollyburner]

so does this mean my already grains are ok?

and now mining works again?

I will brb I need to know whats going on I want to mine again if its working.

plz tell me all my grains are still ok I mined them so hard I don't want them to disappear.

[Galimore]

ok the PoW mining is back... if you can not sync with addnode above, you need to download this file here, please read the following before you download the file:

https://mega.co.nz/#!Mk1HzYpA!eeddQXV3DvRHNbSMLeVuLycfde8sm5mFH-qtlEgxUQA

This is a big zip file (31.7M), which contains 3 parts:
- A Blockchain directory which contains the correct blockchain.
- A file main.cpp, that contains the above code change.
- A windows qt client (grain-qt-withblock38847reject.exe), contains the above change.

If you can not sync with addnode, the first thing you should try is to replace the blockchain. This is what you do:
1. Quit qt client.
2. Go to Grain config dir. create a new directory (for example called oldchain), move the database dir, blk0001.dat, blkindex.dat files to the new dir you created, then move these files from Blockchain in the downloaded unzipped file, to config dir. This way you can always go back to your old chain if anything happens.
3. Now start your normal qt client (no need to use the downloaded one), always with the addnodes as above, you should sync and then start to mine.

Only if it is still, not working, then you need to move the blockchain to another dir (like above), and with addnode as above, and start grain-qt-withblock38847reject.exe file. Now it should sync from the scratch (will take a while to sync all).
Then you can start mine.

Let me know if anyone has issue.

Good mining  

Doesn't seem to be able to sync. I replaced the three files and it says it's catching up but it's been stuck on block 39349 for 15 minutes.

[bosian]

how do I add node?

in the conf file, check OP.

[bosian]

ok the PoW mining is back... if you can not sync with addnode above, you need to download this file here, please read the following before you download the file:

https://mega.co.nz/#!Mk1HzYpA!eeddQXV3DvRHNbSMLeVuLycfde8sm5mFH-qtlEgxUQA

This is a big zip file (31.7M), which contains 3 parts:
- A Blockchain directory which contains the correct blockchain.
- A file main.cpp, that contains the above code change.
- A windows qt client (grain-qt-withblock38847reject.exe), contains the above change.

If you can not sync with addnode, the first thing you should try is to replace the blockchain. This is what you do:
1. Quit qt client.
2. Go to Grain config dir. create a new directory (for example called oldchain), move the database dir, blk0001.dat, blkindex.dat files to the new dir you created, then move these files from Blockchain in the downloaded unzipped file, to config dir. This way you can always go back to your old chain if anything happens.
3. Now start your normal qt client (no need to use the downloaded one), always with the addnodes as above, you should sync and then start to mine.

Only if it is still, not working, then you need to move the blockchain to another dir (like above), and with addnode as above, and start grain-qt-withblock38847reject.exe file. Now it should sync from the scratch (will take a while to sync all).
Then you can start mine.

Let me know if anyone has issue.

Good mining  

Doesn't seem to be able to sync. I replaced the three files and it says it's catching up but it's been stuck on block 39349 for 15 minutes.

even not in sync, try to mine to see if you can mine?

[bosian]

so does this mean my already grains are ok?

and now mining works again?

I will brb I need to know whats going on I want to mine again if its working.

plz tell me all my grains are still ok I mined them so hard I don't want them to disappear.

nothing of the mined blocks will be lost, except maximum 3 blocks.

[Galimore]

ok the PoW mining is back... if you can not sync with addnode above, you need to download this file here, please read the following before you download the file:

https://mega.co.nz/#!Mk1HzYpA!eeddQXV3DvRHNbSMLeVuLycfde8sm5mFH-qtlEgxUQA

This is a big zip file (31.7M), which contains 3 parts:
- A Blockchain directory which contains the correct blockchain.
- A file main.cpp, that contains the above code change.
- A windows qt client (grain-qt-withblock38847reject.exe), contains the above change.

If you can not sync with addnode, the first thing you should try is to replace the blockchain. This is what you do:
1. Quit qt client.
2. Go to Grain config dir. create a new directory (for example called oldchain), move the database dir, blk0001.dat, blkindex.dat files to the new dir you created, then move these files from Blockchain in the downloaded unzipped file, to config dir. This way you can always go back to your old chain if anything happens.
3. Now start your normal qt client (no need to use the downloaded one), always with the addnodes as above, you should sync and then start to mine.

Only if it is still, not working, then you need to move the blockchain to another dir (like above), and with addnode as above, and start grain-qt-withblock38847reject.exe file. Now it should sync from the scratch (will take a while to sync all).
Then you can start mine.

Let me know if anyone has issue.

Good mining  

Doesn't seem to be able to sync. I replaced the three files and it says it's catching up but it's been stuck on block 39349 for 15 minutes.

even not in sync, try to mine to see if you can mine?

One sec. Deleted the blk0001.dat and blkindex.dat files and used the new .exe. It's syncing from scratch now and I'll try to mine when it's done.

[suncoastbuddy]

mine is stuck at 39858

[bosian]

weird, I am at 39314 now. and I mine fine.

[bosian]

at 39327 now, please don't forget to put
addnode=66.187.67.233
addnode=72.20.18.200

in your conf file.

[bosian]

ok the PoW mining is back... if you can not sync with addnode above, you need to download this file here, please read the following before you download the file:

https://mega.co.nz/#!Mk1HzYpA!eeddQXV3DvRHNbSMLeVuLycfde8sm5mFH-qtlEgxUQA

This is a big zip file (31.7M), which contains 3 parts:
- A Blockchain directory which contains the correct blockchain.
- A file main.cpp, that contains the above code change.
- A windows qt client (grain-qt-withblock38847reject.exe), contains the above change.

If you can not sync with addnode, the first thing you should try is to replace the blockchain. This is what you do:
1. Quit qt client.
2. Go to Grain config dir. create a new directory (for example called oldchain), move the database dir, blk0001.dat, blkindex.dat files to the new dir you created, then move these files from Blockchain in the downloaded unzipped file, to config dir. This way you can always go back to your old chain if anything happens.
3. Now start your normal qt client (no need to use the downloaded one), always with the addnodes as above, you should sync and then start to mine.

Only if it is still, not working, then you need to move the blockchain to another dir (like above), and with addnode as above, and start grain-qt-withblock38847reject.exe file. Now it should sync from the scratch (will take a while to sync all).
Then you can start mine.

Let me know if anyone has issue.

Good mining  

Doesn't seem to be able to sync. I replaced the three files and it says it's catching up but it's been stuck on block 39349 for 15 minutes.

even not in sync, try to mine to see if you can mine?

One sec. Deleted the blk0001.dat and blkindex.dat files and used the new .exe. It's syncing from scratch now and I'll try to mine when it's done.

hope you deleted the databse dir too (in Grain dir), in order to sync from scratch...

[Galimore]

ok the PoW mining is back... if you can not sync with addnode above, you need to download this file here, please read the following before you download the file:

https://mega.co.nz/#!Mk1HzYpA!eeddQXV3DvRHNbSMLeVuLycfde8sm5mFH-qtlEgxUQA

This is a big zip file (31.7M), which contains 3 parts:
- A Blockchain directory which contains the correct blockchain.
- A file main.cpp, that contains the above code change.
- A windows qt client (grain-qt-withblock38847reject.exe), contains the above change.

If you can not sync with addnode, the first thing you should try is to replace the blockchain. This is what you do:
1. Quit qt client.
2. Go to Grain config dir. create a new directory (for example called oldchain), move the database dir, blk0001.dat, blkindex.dat files to the new dir you created, then move these files from Blockchain in the downloaded unzipped file, to config dir. This way you can always go back to your old chain if anything happens.
3. Now start your normal qt client (no need to use the downloaded one), always with the addnodes as above, you should sync and then start to mine.

Only if it is still, not working, then you need to move the blockchain to another dir (like above), and with addnode as above, and start grain-qt-withblock38847reject.exe file. Now it should sync from the scratch (will take a while to sync all).
Then you can start mine.

Let me know if anyone has issue.

Good mining  

Doesn't seem to be able to sync. I replaced the three files and it says it's catching up but it's been stuck on block 39349 for 15 minutes.

even not in sync, try to mine to see if you can mine?

One sec. Deleted the blk0001.dat and blkindex.dat files and used the new .exe. It's syncing from scratch now and I'll try to mine when it's done.

hope you deleted the databse dir too (in Grain dir), in order to sync from scratch...

I deleted the database dir too. After syncing from scratch it appears that I'm caught up, but the wallet still says I'm "out of sync" and every share that cgminer submits is stale.

[bosian]

ok the PoW mining is back... if you can not sync with addnode above, you need to download this file here, please read the following before you download the file:

https://mega.co.nz/#!Mk1HzYpA!eeddQXV3DvRHNbSMLeVuLycfde8sm5mFH-qtlEgxUQA

This is a big zip file (31.7M), which contains 3 parts:
- A Blockchain directory which contains the correct blockchain.
- A file main.cpp, that contains the above code change.
- A windows qt client (grain-qt-withblock38847reject.exe), contains the above change.

If you can not sync with addnode, the first thing you should try is to replace the blockchain. This is what you do:
1. Quit qt client.
2. Go to Grain config dir. create a new directory (for example called oldchain), move the database dir, blk0001.dat, blkindex.dat files to the new dir you created, then move these files from Blockchain in the downloaded unzipped file, to config dir. This way you can always go back to your old chain if anything happens.
3. Now start your normal qt client (no need to use the downloaded one), always with the addnodes as above, you should sync and then start to mine.

Only if it is still, not working, then you need to move the blockchain to another dir (like above), and with addnode as above, and start grain-qt-withblock38847reject.exe file. Now it should sync from the scratch (will take a while to sync all).
Then you can start mine.

Let me know if anyone has issue.

Good mining  

Doesn't seem to be able to sync. I replaced the three files and it says it's catching up but it's been stuck on block 39349 for 15 minutes.

even not in sync, try to mine to see if you can mine?

One sec. Deleted the blk0001.dat and blkindex.dat files and used the new .exe. It's syncing from scratch now and I'll try to mine when it's done.

hope you deleted the databse dir too (in Grain dir), in order to sync from scratch...

I deleted the database dir too. After syncing from scratch it appears that I'm caught up, but the wallet still says I'm "out of sync" and every share that cgminer submits is stale.

"out of sync" is fine, try to mine...

what you sync'd to? I am at 39358 now.

also did you sync from scratch with grain-qt-withblock38847reject.exe?

[bosian]

looks like someone is getting some blocks?

[Jollyburner]

so does this mean my already grains are ok?

and now mining works again?

I will brb I need to know whats going on I want to mine again if its working.

plz tell me all my grains are still ok I mined them so hard I don't want them to disappear.

nothing of the mined blocks will be lost, except maximum 3 blocks.

thanks bosian I will try to get it fixed now and get some hashing power back on the network!

[Galimore]

"out of sync" is fine, try to mine...

what you sync'd to? I am at 39358 now.

also did you sync from scratch with grain-qt-withblock38847reject.exe?

I'm at 39413 right now. Mining doesn't work though, I've solved 20+ blocks solo and every single one has been stale. They don't show up in my wallet either.

[bosian]

"out of sync" is fine, try to mine...

what you sync'd to? I am at 39358 now.

also did you sync from scratch with grain-qt-withblock38847reject.exe?

I'm at 39413 right now. Mining doesn't work though, I've solved 20+ blocks solo and every single one has been stale. They don't show up in my wallet either.

this should be the right chain... your mined blocks are not accepted?

at 39421 now.

[Galimore]

"out of sync" is fine, try to mine...

what you sync'd to? I am at 39358 now.

also did you sync from scratch with grain-qt-withblock38847reject.exe?

I'm at 39413 right now. Mining doesn't work though, I've solved 20+ blocks solo and every single one has been stale. They don't show up in my wallet either.

this should be the right chain... your mined blocks are not accepted?

at 39421 now.

Nope, seems to be doing the same thing it was before the patch to me.

[Jollyburner]

my wallet says its ok after I added nodes, but solo mining says its finding blocks and nothing is coming.

not sure if that's what everyone else is getting but I will try to download all that other stuff.

is any1 generating good new grains? plz confirm

[bosian]

"out of sync" is fine, try to mine...

what you sync'd to? I am at 39358 now.

also did you sync from scratch with grain-qt-withblock38847reject.exe?

I'm at 39413 right now. Mining doesn't work though, I've solved 20+ blocks solo and every single one has been stale. They don't show up in my wallet either.

this should be the right chain... your mined blocks are not accepted?

at 39421 now.

Nope, seems to be doing the same thing it was before the patch to me.

here's my screenshot of the cgminer

[bosian]

my wallet says its ok after I added nodes, but solo mining says its finding blocks and nothing is coming.

not sure if that's what everyone else is getting but I will try to download all that other stuff.

is any1 generating good new grains? plz confirm

what block you are at? I am at 39449 now.

I guess someone should get the blocks, as I don't get all the blocks.