[ANN][GRA] Graincoin - New PoW/PoS coin | Fast, secure | Version 1.5 Released!

[bosian]

OK here are the list of people who will each receive a bounty from Grain Dev Team! You are the core of this community, we are very proud that we have a great community that supports us during an unexpected difficult time of the coin. Now the issue is about to be resolved completely. We reward our supporters!

Those people on the list please either PM me or post your wallet address here. The bounty is of undisclosed amount and varies, but all I can say is that you will be very happy

For all the rest, don't worry, we will open a generic public giveaway after Christmas (won't have time during the Chistmas ).

Beeker
bondi
Bozuatle
cryptomining
dimmak
dorcorax
DRKMSTR
Galimore
Illusmare
JL0z
Jollyburner
karky
luckygenough56
Mark77
MrSike
Nolo
northgate
Oldminer
paladin281978
programmer
suncoastbuddy
tekkx2k13
theironman
udjin123
vonross2012
Zeraful

for those who haven't done so yet, please PM me or post here your wallet address...

[vonross2012]

is anyone else having problems with rejects from forkpool?

I think its on my end cause it only happened now that my friend showed up and is playin LoL, but jw if anyone else is having this.

some of my rigs start dropping all rejects, and one of them  ( a different one this time, it happened twice) stays going just fine.

I wonder what could cause this strange behaviour but its probably just my network switches.

Iv'e been having issues. So far today all the payouts except the first one has been orphaned.  I'll wait and see what happends

[Oldminer]

I restored the wallet ok from backup and it shows all the previous transactions but zero balance. If I run the -salvagewallet option on it I get a 'cannot initialize keypool' error. I then deleted the wallet and ran the client again and still got the same error, so then replaced the wallet again from backup and this time it opened ok & again I can see the transactions & coins mined but it still shows a zero balance (apart from a few coins I successfully sent to the wallet this morning after I ran the fix).

p.s. Im not overly bothered about the coins, good to see the client is now working, and I did find a 15,000 block right off the bat on one of my miners

type repairwallet in console

11:39:29

repairwallet


11:39:29

{
"mismatched spent coins" : 32,
"amount affected by repair" : 183217.00000000
}


worked a treat,

PM me or post your wallet and I'll send you some coins

[dimmak]

OK here are the list of people who will each receive a bounty from Grain Dev Team! You are the core of this community, we are very proud that we have a great community that supports us during an unexpected difficult time of the coin. Now the issue is about to be resolved completely. We reward our supporters!

Those people on the list please either PM me or post your wallet address here. The bounty is of undisclosed amount and varies, but all I can say is that you will be very happy

For all the rest, don't worry, we will open a generic public giveaway after Christmas (won't have time during the Chistmas ).

Beeker
bondi
Bozuatle
cryptomining
dimmak
dorcorax
DRKMSTR
Galimore
Illusmare
JL0z
Jollyburner
karky
luckygenough56
Mark77
MrSike
Nolo
northgate
Oldminer
paladin281978
programmer
suncoastbuddy
tekkx2k13
theironman
udjin123
vonross2012
Zeraful

for those who haven't done so yet, please PM me or post here your wallet address...

I sent you a PM. Have a nice day bosian.

Remember all, keep mining.

Merry Christmas

[Jollyburner]

I think there is a problem again

forkpool is not finding blocks and some grains have disappear from my wallet it is not showing the grains I earned today and its showing the data from the old chain I think??

doesn't matter if I replace wallet with backup one, just shows old balance plus transfer from bosian...

I think its jumped back on the old data

[suncoastbuddy]

I have just started having an error on cgminer.  But it says the error and then closes straight away. How do I get it to print to file or stay on the screen so that I can see what error it is?

Thanks in advance 

Everything was working fine and I was mining all ok.  Then my computer froze and I had to restart it and it hasn't worked since.

Now whenever I try to use cgminer (doesn't matter which pool/coin) and it comes up saying probing for alive pool and stays there for a bit and then just shuts down.

Anyone have any ideas?

[Jollyburner]

I have just started having an error on cgminer.  But it says the error and then closes straight away. How do I get it to print to file or stay on the screen so that I can see what error it is?

Thanks in advance 

Everything was working fine and I was mining all ok.  Then my computer froze and I had to restart it and it hasn't worked since.

Now whenever I try to use cgminer (doesn't matter which pool/coin) and it comes up saying probing for alive pool and stays there for a bit and then just shuts down.

Anyone have any ideas?

I think its broken again, something to do with the earlier fix. it may take some time to fix it, just mine something else for now and check back later. I will update if I get mine working

[suncoastbuddy]

I have just started having an error on cgminer.  But it says the error and then closes straight away. How do I get it to print to file or stay on the screen so that I can see what error it is?

Thanks in advance 

Everything was working fine and I was mining all ok.  Then my computer froze and I had to restart it and it hasn't worked since.

Now whenever I try to use cgminer (doesn't matter which pool/coin) and it comes up saying probing for alive pool and stays there for a bit and then just shuts down.

Anyone have any ideas?

I think its broken again, something to do with the earlier fix. it may take some time to fix it, just mine something else for now and check back later. I will update if I get mine working

This is happening for me with all coins and pools now

[dimmak]

Not again.

I hope they'll fix it as soon as last time. We'll see.

Keep us posted.

[bosian]

I think there is a problem again

forkpool is not finding blocks and some grains have disappear from my wallet it is not showing the grains I earned today and its showing the data from the old chain I think??

doesn't matter if I replace wallet with backup one, just shows old balance plus transfer from bosian...

I think its jumped back on the old data

I am sync'ed at block 41711 now...

make sure you include these addnodes:

addnode=66.187.67.233
addnode=199.58.167.85
addnode=98.207.109.245

[bosian]

I have just started having an error on cgminer.  But it says the error and then closes straight away. How do I get it to print to file or stay on the screen so that I can see what error it is?

Thanks in advance  

Everything was working fine and I was mining all ok.  Then my computer froze and I had to restart it and it hasn't worked since.

Now whenever I try to use cgminer (doesn't matter which pool/coin) and it comes up saying probing for alive pool and stays there for a bit and then just shuts down.

Anyone have any ideas?

I think its broken again, something to do with the earlier fix. it may take some time to fix it, just mine something else for now and check back later. I will update if I get mine working

if you use the client I provided (with blacklist of that block), it can't go to the old blockchain.

[Jollyburner]

I have just started having an error on cgminer.  But it says the error and then closes straight away. How do I get it to print to file or stay on the screen so that I can see what error it is?

Thanks in advance 

Everything was working fine and I was mining all ok.  Then my computer froze and I had to restart it and it hasn't worked since.

Now whenever I try to use cgminer (doesn't matter which pool/coin) and it comes up saying probing for alive pool and stays there for a bit and then just shuts down.

Anyone have any ideas?

I think its broken again, something to do with the earlier fix. it may take some time to fix it, just mine something else for now and check back later. I will update if I get mine working

if you use the client I provided (with blocklist of that block), it can't go to the old blockchain.

I may have broken everything... but forkpool doesn't seem to be finding blocks so there must be some issue with the pool at least.

and I couldn't solo mine. so I tried to open the main wallet again, did a backup, then my coins disappeared.. tried to restore my backup, still disappeared.

hopefully I didn't kill them somehow

[bosian]

mining pool the block number is correct, but it seems it not getting block. Or the display incorrect.

[bosian]

What is your block number? mine is 41721, and the mining pool is the same.

I think mining pool get the block, just it's not updating.

[MrSike]

Nice fix, back to mining this coin on forkpool.

[Jollyburner]

update

I did a bunch of things and now my wallet is going in a FRENZY lol numbers flying all over the place and its balance is back to normal...

I am launching from the one u said and I replaced the files again, added the nodes above, then launched in server mode.

I will see if I can solo yet

[suncoastbuddy]

my wallet says 41756

[bosian]

19:50:16
getblockcount
19:50:16
41747

looks correct to me. I have 41758 now

[bosian]

I actually just get a block, I think we are fine:

[2013-12-24 17:52:53] Network diff set to 39.7K
 [2013-12-24 17:52:53] New block detected on network
 [2013-12-24 17:53:43] Network diff set to 42.4K
 [2013-12-24 17:53:43] New block detected on network
 [2013-12-24 17:54:03] Network diff set to 37.8K
 [2013-12-24 17:54:03] New block detected on network
 [2013-12-24 17:54:38] Network diff set to 40.2K
 [2013-12-24 17:54:38] New block detected on network
 [2013-12-24 17:54:43] Network diff set to 42.7K
 [2013-12-24 17:54:43] New block detected on network
 [2013-12-24 17:54:48] Network diff set to 45.6K
 [2013-12-24 17:54:48] New block detected on network
 [2013-12-24 17:55:03] Network diff set to 43K
 [2013-12-24 17:55:03] New block detected on network
 [2013-12-24 17:55:06] Found block for pool 0!
 [2013-12-24 17:55:06] Accepted 0000b22e Diff 94.2K/42991 BLOCK! GPU 0 pool 0
 [2013-12-24 17:55:06] Network diff set to 44.9K
 [2013-12-24 17:55:06] New block detected on network
 [2013-12-24 17:55:17] Network diff set to 47.2K
 [2013-12-24 17:55:17] New block detected on network

[Jollyburner]

so we think its just forkpool is working but not displaying correctly?

I wonder if I should solo mine or go back on forkpool?