[ANN][MULTI][VARDIFF] TradeMyBit MULTIALGO Profit Swap w/ Optional Auto-exchange

[nasone32]

i'd like to see EXECOIN on your multiport.
https://bitcointalk.org/index.php?topic=491058.0

it's a scrypt-n and could widen your scrypt-n portfolio.

no premine, no instamine, slowly growing popularity.

exchanged on nxt-e and coinedup

[iru786]

Guys...
My CGWatcher log from yesterday night says i found 3 blocks... Is there any way for me to see which coins were the blocks for?

[uberua]

Merc stopped writing btc/1mh, can anyone write what was the current rate last days including today?
Tnx.

[umkas]

what miner (sgminer?) and settings/bat must I use for scrypt-n multiport? Have 280X cards. Thereis no answer in FAQ

[uberua]

what miner (sgminer?) and settings/bat must I use for scrypt-n multiport? Have 280X cards. Thereis no answer in FAQ

Search the web for vertminer. My 280x works fine with -v 1 -w 256 -I 13 -g 2 --lookup-gap 2 --thread-concurrency 8193.
The hash rate will be about 45% of usual skrypt mining (280x gives around 350 kh/s).

[umkas]

thanks, I looking sgminer, what about -nfactor and other scrypt-n specific option for multiport?

At second how many forks scrypt-n multiport mine?

upd: -g2 ?? can you post full settings? (can use pastebin)

[phrozenspite]

I know the original plan was to keep the pool small, but perhaps we might want to open the registrations again so that we can get more hash on our scrypt-n switch

[bullus]

@merc

Why is GPUcoin everytime still on top of the score?

If I calculate it ,Panda or VTC should score higher than GPUcoin.

Using vtc calculator and change the diff/reward/value.


http://www.coinwarz.com/calculators/vertcoin-mining-calculator

[greatwolf]

It seems the price for gpuc isn't getting updated properly? It shows 10 satoshi's while the exchange is showing ~30 satoshi? Also can you normalize the "Last btc" column to show 8 decimal places instead of 9?

[umkas]

merc, I'm test scrypt-n multiport and see in Auto-exchange Batches LTC. As I underastand, there is 2-way exchange for some coins: coin-to-LTC, then LTC-to-btc? If so, we have two fee 2%+2%. It's too much in comparsion with the usual scrypt!

[yorich]

Merc,  or anyone else using CGWatcher here?  I just had an idea.  Currently I have two profiles, one for scrypt, the other for scrypt-N.   I try to check every so often during the day to see which is more profitable, and change my miners to the more profitable profile.   But since CGwatcher has a schedule function, would it be more profitable for me to set up profiles for every coin that CGWatcher has profiles for, and then auto-switch to the most profitable profile, say, every hour or so?

[umkas]

yorich, I belive switching has no big matter. Time from (you select profatible and start minig) to (you recieve btc/usd/any hard coin, not fork) is many hours. Coins need deposit confirmations, then transfer exchange&confirmations. During this process coin rate go up or break down. So we mining more profatible now, but have only daily/hourly average sell profit, not maximum this-moment(when mining)-peak snap profit.
You can premine some coins and wait when it grows. But as You can see, one of 100 is grows up and You must catch this moment.

[merc82]

merc, I'm test scrypt-n multiport and see in Auto-exchange Batches LTC. As I underastand, there is 2-way exchange for some coins: coin-to-LTC, then LTC-to-btc? If so, we have two fee 2%+2%. It's too much in comparsion with the usual scrypt!

Fee's are only applied on the payout side, so while it exchanges to LTC then to BTC, the fee is only applied on the BTC side.

[umkas]

thanks for reply! Looking in stats and already understand before you post

What "exchanged_pending_review" mean? Already exchanged, but not divided/credited to accounts? Or not exchanged at all?

Another small question: if you not use web-cachers/accelerators, can you put current server date-time in site header (where "Currently Mining" and other stats, not js "live" clock, only current timestamp). Always confused looking server stats as our time zone very differ.

Also: maybe "Coins Mined - Last 24 Hours" may have 3 charts: one for scrypt, one for n-scrypt and total?

[iru786]

While Mining AUR Coin... I found 2 block...

[3/12/2014 12:15:26 PM]  CGMiner (3356): Current pool is Pool 0 (XXXXXX@stratum+tcp://stratum-us.trademybit.com:3330)
[3/12/2014 12:15:43 PM]  CGMiner (3356): Congratulations, you found 2 blocks!


But i cannot see any blocks against my name... I am looking at it wrong?

[manfred87]

Quite a few people have asked me to post the BTC/MHash each day for the autoexchange -- unfortunately this number is not easy to obtain due to the simple fact that we have a very large mixed-bag situation with mining here

you could simply divide the coins earned the last day by the pool hashrate ( averaged for one day ) - https://pool.trademybit.com/charts/
so you know how munch the average BTC/Mhash is..
for example yesterday circa 10 BTC / 1900 Mhash / day= 0.00526 BTC / Mhash / day

furthermore you could compare that to the actual litecoin diff.. - http://bitcoinwisdom.com/litecoin/difficulty
0.2123 LTC / Mhash / day = 0,00579 BTC / Mhash / day

so we are quite below that -.-

[triplef]

quick question on payouts..


is it possible to autoexchange SOME and not on SOM OTHERS, i would for example autoexchange any coins  no address is entered in the coins , but not exchange the ones i have an address... meaning auto x the crap and keep the ones i intend to hold.

is this doable ?

[Alexseypv]

decided to try again at this pool and half an hour later got a disconnect.
Poole is within 10 minutes does not work, what's the problem? How often does it happen here?


[2014-03-12 22:06:11] Started cgminer 3.7.2
 [2014-03-12 22:06:11] Probing for an alive pool
 [2014-03-12 22:07:11] No servers were found that could be used to get work from.
 [2014-03-12 22:07:11] Please check the details from the list below of the servers you have input
 [2014-03-12 22:07:11] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
 [2014-03-12 22:07:11] Pool: 0  URL: stratum+tcp://stratum-eu.trademybit.com:3330  User: xxx  Password: x
 [2014-03-12 22:07:11] Press any key to exit, or cgminer will try again in 15s.
 [2014-03-12 22:08:05] No servers could be used! Exiting.

[MineNerd]

quick question on payouts..


is it possible to autoexchange SOME and not on SOM OTHERS, i would for example autoexchange any coins  no address is entered in the coins , but not exchange the ones i have an address... meaning auto x the crap and keep the ones i intend to hold.

is this doable ?

Yes, I do exactly this. I have a select few coins that I send to my personal wallet, and the rest I have flagged as autosell.

[zoob]

Is there any way we can more easily select toggle 'auto sell'? 
Maybe make a list selection like this?

http://openfaces.org/documentation/developersGuide/components-index.data/twoListSelection.png