[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[cointradero]

ultra nitro 2 doesn't show the pool link, how can we go to this pool?

The idea behind shutting down Nitro 1 was to force people onto other pools -- not to roll all of those people on to Nitro 2, which is what happened.  The guy above loving the fact that he is now getting no orphans is great, but Nitro 2 is now above 51% of the network and the same thing is still happening everywhere else.  I don't know if they removed the link so that no one else would sign up for either Nitro pool until this is corrected, but even if they didn't, the hashrate still needs spread out better.  

The selfish attitude is costing these people longterm, and maybe even in the short-term as it dissuades people from moving into the coin.  It must be discouraging to only find pools that have less than 10% of the network to sign up for when deciding to mine.  

[1715198431]

1715198431

[mishax1]

Gotta love cryptsy for trying to help the coin with a higher sell fee..

[barbados-fs]

Who can tell why the actual number of received coins somewhere in the 1.5-2 times less than what shows on the bullet?
Information on the pool
Rank          User name          kH/s   UTC/DAY    USD/Day
n/a       barbados-fs    443    603.539    7,588.2958


Фepмa 1
--------
 yacminer version 3.5.0-yac2 - Started: [2014-04-15 21:29:34]
--------------------------------------------------------------------------------
 (5s):254.2K (avg):257.6Kh/s | A:34800  R:8  HW:5  U:233.39/m  WU:245.41/m  FB:1
 ST: 2  SS: 0  NB: 284  LW: 5074  GF: 0  RF: 0
 Connected to ultra.nitro.org diff 64 NF 12 with stratum as user barbado
 Block: 877c472d320776d3...  Diff:54K  Started: [23:57:48]  Best share: 140K
--------------------------------------------------------------------------------
 [Pool management [GPU management [Settings [Display options [Quit
 GPU 0:  60.0C 3366RPM | 64.45K/64.44Kh/s | A:7648 R:4 HW:1 U: 51.29/m T:1 rI:80
 GPU 1:  58.0C 3366RPM | 64.46K/64.37Kh/s | A:9536 R:1 HW:0 U: 63.95/m T:1 rI:80
 GPU 2:  58.0C 3396RPM | 64.43K/64.40Kh/s | A:9072 R:1 HW:1 U: 60.84/m T:1 rI:80
 GPU 3:  52.0C 3364RPM | 64.43K/64.42Kh/s | A:8544 R:2 HW:3 U: 57.30/m T:1 rI:80


Фepмa 2
----------
  yacminer version 3.5.0-yac2 - Started: [2014-04-15 23:52:31]
--------------------------------------------------------------------------------
 (5s):160.8K (avg):159.5Kh/s | A:992  R:1  HW:9  U:118.38/m  WU:125.54/m  FB:0
 ST: 2  SS: 0  NB: 20  LW: 312  GF: 0  RF: 0
 Connected to ultra.nitro.org diff 32 NF 12 with stratum as user barbado
 Block: 7a6a3afcad463017...  Diff:53.9K  Started: [00:00:50]  Best share: 557
--------------------------------------------------------------------------------
 [Pool management [GPU management [Settings [Display options [Quit
 GPU 0:  51.0C 3107RPM | 39.87K/39.88Kh/s | A:416 R:0 HW:5 U: 49.64/m T:1 rI:100
 GPU 1:  53.0C 3029RPM | 39.90K/39.88Kh/s | A:192 R:1 HW:2 U: 22.91/m T:1 rI:100
 GPU 2:  54.0C 3096RPM | 39.94K/39.92Kh/s | A:160 R:0 HW:1 U: 19.09/m T:1 rI:100
 GPU 3:  50.0C 3107RPM | 39.91K/39.90Kh/s | A:224 R:0 HW:1 U: 26.73/m T:1 rI:100

If I get the sum rate 417kH / s if you take on WU, then 370.95 / m
Ie however according to the pool should get 600 UTC well even though 500, and really only 300-340 UTC per night.

[Slaxt]

update!

[SxC]

Who can tell why the actual number of received coins somewhere in the 1.5-2 times less than what shows on the bullet?
Information on the pool
Rank          User name          kH/s   UTC/DAY    USD/Day
n/a       barbados-fs    443    603.539    7,588.2958


Фepмa 1
--------
 yacminer version 3.5.0-yac2 - Started: [2014-04-15 21:29:34]
--------------------------------------------------------------------------------
 (5s):254.2K (avg):257.6Kh/s | A:34800  R:8  HW:5  U:233.39/m  WU:245.41/m  FB:1
 ST: 2  SS: 0  NB: 284  LW: 5074  GF: 0  RF: 0
 Connected to ultra.nitro.org diff 64 NF 12 with stratum as user barbado
 Block: 877c472d320776d3...  Diff:54K  Started: [23:57:48]  Best share: 140K
--------------------------------------------------------------------------------
 [Pool management [GPU management [Settings [Display options [Quit
 GPU 0:  60.0C 3366RPM | 64.45K/64.44Kh/s | A:7648 R:4 HW:1 U: 51.29/m T:1 rI:80
 GPU 1:  58.0C 3366RPM | 64.46K/64.37Kh/s | A:9536 R:1 HW:0 U: 63.95/m T:1 rI:80
 GPU 2:  58.0C 3396RPM | 64.43K/64.40Kh/s | A:9072 R:1 HW:1 U: 60.84/m T:1 rI:80
 GPU 3:  52.0C 3364RPM | 64.43K/64.42Kh/s | A:8544 R:2 HW:3 U: 57.30/m T:1 rI:80


Фepмa 2
----------
  yacminer version 3.5.0-yac2 - Started: [2014-04-15 23:52:31]
--------------------------------------------------------------------------------
 (5s):160.8K (avg):159.5Kh/s | A:992  R:1  HW:9  U:118.38/m  WU:125.54/m  FB:0
 ST: 2  SS: 0  NB: 20  LW: 312  GF: 0  RF: 0
 Connected to ultra.nitro.org diff 32 NF 12 with stratum as user barbado
 Block: 7a6a3afcad463017...  Diff:53.9K  Started: [00:00:50]  Best share: 557
--------------------------------------------------------------------------------
 [Pool management [GPU management [Settings [Display options [Quit
 GPU 0:  51.0C 3107RPM | 39.87K/39.88Kh/s | A:416 R:0 HW:5 U: 49.64/m T:1 rI:100
 GPU 1:  53.0C 3029RPM | 39.90K/39.88Kh/s | A:192 R:1 HW:2 U: 22.91/m T:1 rI:100
 GPU 2:  54.0C 3096RPM | 39.94K/39.92Kh/s | A:160 R:0 HW:1 U: 19.09/m T:1 rI:100
 GPU 3:  50.0C 3107RPM | 39.91K/39.90Kh/s | A:224 R:0 HW:1 U: 26.73/m T:1 rI:100

If I get the sum rate 417kH / s if you take on WU, then 370.95 / m
Ie however according to the pool should get 600 UTC well even though 500, and really only 300-340 UTC per night.

the diffulcuty spikes a fair bit and this also affect amount of coins you get say for intance

diff is low when you looked and said 600 coins then diff could be twice as high

that means 300 coins,just take an average and say you should get 450 a day anything more and its a bonus

[clipto]

4. Recruiting new pools. We are actively working to bring more large pools into the UTC family. We will keep you updated as we work on this.

I've also asked it on freenode on #ultracoin
Can someone please provide a howto on setting up a MPOS pool for ultracoin?
We want to setup a Dutch (west-European) pool.
Thanks!

[niothor]

I'm doing a research project on coin distribution for both older and new coins. I'm interested on gathering some data for top addresses and how much of the coins the top100 have. This along with the number of people (addresses) actually holding any amount of coins.

I have some info from bitinfocharts on a few coins but I really do need some data on other coins along with less exposed or new ones.

If anyone knows an explorer with this feature drop a line.

[funsponge]

ultracoins success should be measured not by current value, but rather than the growth in the real economy. That means people been able to execute everyday transactions & businesses accepting it as a form of currency.

To achieve this the development and structural ground work needs to be put into place and get as many sites, stores and exchanges excepting UTC.

Lets focus on the long term an stay out of this the daily price battle with other alts, as without a skeleton these will fall away within 12 months leaving Ultracoin to be slowly adopted, which will raise the value at a steady pace.

[bumface]

Ultracoins future is so bright, soon you will all need sunglasses

[mizultra]

Bumface,

Considering how much punishment BTC and LTC have doled out to me lately, I could use some UTC sunshine!

[pieterjanvh]

Any good settings for a 7950? The configurator settings don't work for me...

[Wirly]

Any good settings for a 7950? The configurator settings don't work for me...

What miner are you using, The "configurator" has settings for both yacminer and ultracoinminer. You can not mix them up. Make sure you are using the correct setting for your miner. They both work, if not then tell what is wrong.

[Wirly]

4. Recruiting new pools. We are actively working to bring more large pools into the UTC family. We will keep you updated as we work on this.

I've also asked it on freenode on #ultracoin
Can someone please provide a howto on setting up a MPOS pool for ultracoin?
We want to setup a Dutch (west-European) pool.
Thanks!

Sure, fixing the distribution of hashrate is obviously needed and I doubt at this point the remnant of remaining miners will solve it on their own, TheStuhlman has his hands full with this and he proly slaps himself in the head every time, wondering why he has to shut down a successful mining pool in an attempt to help out. We applaud your efforts Mr. TheStuhlman but we can all see that shutting down Nitro1 is not working, only makes Nitro2 the same size. The pac-man looking charts look the same either way. No one wants to mine orphan blocks, power is to expensive. So fixing this will require either doubling hashrate from somewhere else or limiting hashrates by % for pools through a co-ordinated effort.

[pieterjanvh]

Any good settings for a 7950? The configurator settings don't work for me...

What miner are you using, The "configurator" has settings for both yacminer and ultracoinminer. You can not mix them up. Make sure you are using the correct setting for your miner. They both work, if not then tell what is wrong.

I know that... I'm using the ultracoinminer with the 7950 3GB settings, but it crashes my display driver.
I've got 3x Club3D 7950 13 series GPU's and 8GB RAM.

[utcminer]

Any good settings for a 7950? The configurator settings don't work for me...

What miner are you using, The "configurator" has settings for both yacminer and ultracoinminer. You can not mix them up. Make sure you are using the correct setting for your miner. They both work, if not then tell what is wrong.

I know that... I'm using the ultracoinminer with the 7950 3GB settings, but it crashes my display driver.
I've got 3x Club3D 7950 13 series GPU's and 8GB RAM.

where's my words?somebody deleted them?

[bullus]

Any good settings for a 7950? The configurator settings don't work for me...

What miner are you using, The "configurator" has settings for both yacminer and ultracoinminer. You can not mix them up. Make sure you are using the correct setting for your miner. They both work, if not then tell what is wrong.

I know that... I'm using the ultracoinminer with the 7950 3GB settings, but it crashes my display driver.
I've got 3x Club3D 7950 13 series GPU's and 8GB RAM.

Are u overclocking or underclocking? Check your settings. For me using afterburner it start with an undervolt but clocks are at default and display drivers crashed when starting the miner usually when i reboot the pc.

yacminer 4x7950,1x6970 8gb

Code:

,
"xintensity" : "32,3,32,32,32",
"vectors" : "1,1,1,1,1",
"worksize" : "128,128,128,128,128",
"kernel" : "scrypt-chacha,scrypt-chacha,scrypt-chacha,scrypt-chacha,scrypt-chacha",
"lookup-gap" : "3,3,3,3,3",
"buffer-size" : "2394,1576,2394,2394,2394",
"shaders" : "0,0,0,0,0",
"gpu-engine" : "0-0,0-0,0-0,0-0,0-0",
"gpu-fan" : "30",
"gpu-memclock" : "0,0,0,0,0",
"gpu-memdiff" : "0,0,0,0,0",
"gpu-powertune" : "0,0,0,0,0",
"gpu-vddc" : "0.000,0.000,0.000,0.000,0.000",
"temp-cutoff" : "95,95,95,95,95",
"temp-overheat" : "85,85,85,85,85",
"temp-target" : "75,75,75,75,75",
"api-port" : "4028",
"expiry" : "10",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"scrypt" : true,
"scrypt-chacha" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"device" : "0,1,2-4"
}

[Uggle]

Now we have pretty equal hashrate between Nitro 1 and Nitro 2. That's very good ! 

http://bitgo.pw/utc/

[CarlosWing]

hang in there guys, were working on it. Smiley
Just join

[utcminer]

Ultracoins future is so bright, soon you will all need sunglasses

pickaxe.pool.pm:3306 is a very good pool,please add this pool to the main page

[Uggle]

Ultracoins future is so bright, soon you will all need sunglasses

pickaxe.pool.pm:3306 is a very good pool,please add this pool to the main page

That pool is added  utc.pool.pm