Innosilicon releases A9 Zmaster 50ksol/s Equihash miner at 620W

[MZ4]

Hey

Still no overclock for A9 ?

It already overclock at July but private not to public.

https://www.akminer.com/all-products/used-innosilicon-a9

Thanks for your spreading .yes ,we are akminer and surely we could do overclocking on Innosilicon A9 ,new or used ones both ok ,but it is private not public .
Currently some overseas buyers buying used A9 from us and then host in our farm ,our technicians help them do overclocking and they could enjoy the max mining profits .
Please be free to contact us if you are interested in this mode .

https://www.akminer.com/all-products/used-innosilicon-a9

Could you provide us more info about your overclocking software? Stats, Print screens? Do you sell it as a software for A9 owners?

[1714824396]

1714824396

[1714824396]

1714824396

[1714824396]

1714824396

[RapBTC1]

Hello, i have big problem with my A9 Zmaster. (I have 5 A9 Zmaster)
and since 5 month , every day, one of them be disconnected. I need to restart him (TURN OFF -> TURN ON)

Exemple, Monday its the INNO 3 A9 disconnected, Thursday INNO 5, Wednesday INNO 1 etc....

Impossible to resolve this problem. I have 20 miner from BITMAIN, and i dont have any problem with them.

I use Awesome Miner for manage it.

Thanks

PS : Its not the Pool or PSU

[Phuripat]

https://www.asicminervalue.com/miners/innosilicon/a9-zmaster-1

HAHA... end of crypto Innosilicon A9+ ZMaster
ROI 20-24 month

[minefarmbuy]

https://www.asicminervalue.com/miners/innosilicon/a9-zmaster-1

HAHA... end of crypto Innosilicon A9+ ZMaster
ROI 20-24 month

Are you REALLY talking about ROI in the mining !?!?!??!?!
It is not right. Mining is aaaaaalllll about hodling.
If you sell your mining rewards, you will never ROI ...

Mining is not about holding.

It can be about:

supporting a network.
enjoyment through hobby
driving profitability as a business

Or many other things/reasons to people

Holding can be a piece of that and is a viable strategy through a bear market but still though have to pay for power at a minimum and ROI is important for any investment and should be looked at individually from a holding strategy. 

[Poland]

Hey

Still no overclock for A9 ?

It already overclock at July but private not to public.

https://www.akminer.com/all-products/used-innosilicon-a9

Thanks for your spreading .yes ,we are akminer and surely we could do overclocking on Innosilicon A9 ,new or used ones both ok ,but it is private not public .
Currently some overseas buyers buying used A9 from us and then host in our farm ,our technicians help them do overclocking and they could enjoy the max mining profits .
Please be free to contact us if you are interested in this mode .

https://www.akminer.com/all-products/used-innosilicon-a9

How can I overclock Inno A9 to 60ksol

Sorry guys this is my first post and my english is very bad
I have overclock A9 : 60-62ksol +/-. 720W, Fanspd : 50%
Test : Zclassic - miningpoolhub.
I do not know how to show it here my miner settings and ssh.
someone will help me?

                           

[MZ4]

Hey

Still no overclock for A9 ?

It already overclock at July but private not to public.

https://www.akminer.com/all-products/used-innosilicon-a9

Thanks for your spreading .yes ,we are akminer and surely we could do overclocking on Innosilicon A9 ,new or used ones both ok ,but it is private not public .
Currently some overseas buyers buying used A9 from us and then host in our farm ,our technicians help them do overclocking and they could enjoy the max mining profits .
Please be free to contact us if you are interested in this mode .

https://www.akminer.com/all-products/used-innosilicon-a9

How can I overclock Inno A9 to 60ksol

Sorry guys this is my first post and my english is very bad
I have overclock A9 : 60-62ksol +/-. 720W, Fanspd : 50%
Test : Zclassic - miningpoolhub.
I do not know how to show it here my miner settings and ssh.
someone will help me?

                           

Where did you find that Overclock?

[Poland]

Hey

Still no overclock for A9 ?

It already overclock at July but private not to public.

https://www.akminer.com/all-products/used-innosilicon-a9

Thanks for your spreading .yes ,we are akminer and surely we could do overclocking on Innosilicon A9 ,new or used ones both ok ,but it is private not public .
Currently some overseas buyers buying used A9 from us and then host in our farm ,our technicians help them do overclocking and they could enjoy the max mining profits .
Please be free to contact us if you are interested in this mode .

https://www.akminer.com/all-products/used-innosilicon-a9

How can I overclock Inno A9 to 60ksol

Sorry guys this is my first post and my english is very bad
I have overclock A9 : 60-62ksol +/-. 720W, Fanspd : 50%
Test : Zclassic - miningpoolhub.
I do not know how to show it here my miner settings and ssh.
someone will help me?


Has anyone done overclock on your A9?
I am looking for the best and safe settings.
My 1425/175 and it looks pretty good.

                          

Where did you find that Overclock?

Please start reading from page 20

[minefarmbuy]

Where did you find that Overclock?

Seriously

[JerzyKiler]

Regarding overclock, my voltage setting seems to be ignored for chain1 and chain2.

I set the following params in my cgminer.conf:

"noauto": true,
"T1Pll1": "1425",
"T1Pll2": "1425",
"T1Pll3": "1425",
"T1VID1": "175",
"T1VID2": "175",
"T1VID3": "175"

According to the miner logs clock speed is set fine, but the vid is set correctly only for chain0.

Jan 29 11:36:02 InnoMiner mcompat_lib[1327]: chain0: set vid 160
...
Jan 29 11:36:11 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2
Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:14 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 175
Jan 29 11:36:23 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 300(900MHz) -> 368(1416MHz)
...
Jan 29 11:36:26 InnoMiner mcompat_lib[1327]: chain1: set vid 160
...
Jan 29 11:36:34 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2
Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160
Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 300(900MHz) -> 368(1416MHz)
...
Jan 29 11:36:40 InnoMiner mcompat_lib[1327]: chain2: set vid 160
...
Jan 29 11:36:49 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2
Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160
Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 300(900MHz) -> 368(1416MHz)


Any ideas? What am I doing wrong?

[Poland]

Regarding overclock, my voltage setting seems to be ignored for chain1 and chain2.

I set the following params in my cgminer.conf:

"noauto": true,
"T1Pll1": "1425",
"T1Pll2": "1425",
"T1Pll3": "1425",
"T1VID1": "175",
"T1VID2": "175",
"T1VID3": "175"

According to the miner logs clock speed is set fine, but the vid is set correctly only for chain0.

Jan 29 11:36:02 InnoMiner mcompat_lib[1327]: chain0: set vid 160
...
Jan 29 11:36:11 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2
Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:14 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 175
Jan 29 11:36:23 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 300(900MHz) -> 368(1416MHz)
...
Jan 29 11:36:26 InnoMiner mcompat_lib[1327]: chain1: set vid 160
...
Jan 29 11:36:34 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2
Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160
Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 300(900MHz) -> 368(1416MHz)
...
Jan 29 11:36:40 InnoMiner mcompat_lib[1327]: chain2: set vid 160
...
Jan 29 11:36:49 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2
Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160
Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 300(900MHz) -> 368(1416MHz)


Any ideas? What am I doing wrong?

I have the same.

[Poland]

Regarding overclock, my voltage setting seems to be ignored for chain1 and chain2.

I set the following params in my cgminer.conf:

"noauto": true,
"T1Pll1": "1425",
"T1Pll2": "1425",
"T1Pll3": "1425",
"T1VID1": "175",
"T1VID2": "175",
"T1VID3": "175"

According to the miner logs clock speed is set fine, but the vid is set correctly only for chain0.

Jan 29 11:36:02 InnoMiner mcompat_lib[1327]: chain0: set vid 160
...
Jan 29 11:36:11 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2
Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:14 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 175
Jan 29 11:36:23 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 300(900MHz) -> 368(1416MHz)
...
Jan 29 11:36:26 InnoMiner mcompat_lib[1327]: chain1: set vid 160
...
Jan 29 11:36:34 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2
Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160
Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 300(900MHz) -> 368(1416MHz)
...
Jan 29 11:36:40 InnoMiner mcompat_lib[1327]: chain2: set vid 160
...
Jan 29 11:36:49 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2
Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160
Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 300(900MHz) -> 368(1416MHz)


Any ideas? What am I doing wrong?

I have the same.

If you use factory settings max VID is 165 chain0,chain1 and chain2
Performance VID 170 chain0,1 and 2
Performance + VID 175 only chain0 but chain1 and chain2 VID 160. Why ??                 

[JerzyKiler]

Regarding overclock, my voltage setting seems to be ignored for chain1 and chain2.

I set the following params in my cgminer.conf:

"noauto": true,
"T1Pll1": "1425",
"T1Pll2": "1425",
"T1Pll3": "1425",
"T1VID1": "175",
"T1VID2": "175",
"T1VID3": "175"

According to the miner logs clock speed is set fine, but the vid is set correctly only for chain0.

Jan 29 11:36:02 InnoMiner mcompat_lib[1327]: chain0: set vid 160
...
Jan 29 11:36:11 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2
Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:14 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 175
Jan 29 11:36:23 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 300(900MHz) -> 368(1416MHz)
...
Jan 29 11:36:26 InnoMiner mcompat_lib[1327]: chain1: set vid 160
...
Jan 29 11:36:34 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2
Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160
Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 300(900MHz) -> 368(1416MHz)
...
Jan 29 11:36:40 InnoMiner mcompat_lib[1327]: chain2: set vid 160
...
Jan 29 11:36:49 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2
Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160
Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 300(900MHz) -> 368(1416MHz)


Any ideas? What am I doing wrong?

I have the same.

If you use factory settings max VID is 165 chain0,chain1 and chain2
Performance VID 170 chain0,1 and 2
Performance + VID 175 only chain0 but chain1 and chain2 VID 160. Why ??                 

But despite this you achieved a higher hashrate? I have the same situation and cannot see any difference on miner page and pool page. Also, please set in your account settings to accept messages from newbies so that I can PM you (Profile->Modify Profile->Personal Message Options)

[Poland]

Regarding overclock, my voltage setting seems to be ignored for chain1 and chain2.

I set the following params in my cgminer.conf:

"noauto": true,
"T1Pll1": "1425",
"T1Pll2": "1425",
"T1Pll3": "1425",
"T1VID1": "175",
"T1VID2": "175",
"T1VID3": "175"

According to the miner logs clock speed is set fine, but the vid is set correctly only for chain0.

Jan 29 11:36:02 InnoMiner mcompat_lib[1327]: chain0: set vid 160
...
Jan 29 11:36:11 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2
Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:14 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 175
Jan 29 11:36:23 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 300(900MHz) -> 368(1416MHz)
...
Jan 29 11:36:26 InnoMiner mcompat_lib[1327]: chain1: set vid 160
...
Jan 29 11:36:34 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2
Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160
Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 300(900MHz) -> 368(1416MHz)
...
Jan 29 11:36:40 InnoMiner mcompat_lib[1327]: chain2: set vid 160
...
Jan 29 11:36:49 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz)
Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2
Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 300(900MHz)
Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160
Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 300(900MHz) -> 368(1416MHz)


Any ideas? What am I doing wrong?

I have the same.

If you use factory settings max VID is 165 chain0,chain1 and chain2
Performance VID 170 chain0,1 and 2
Performance + VID 175 only chain0 but chain1 and chain2 VID 160. Why ??                 

But despite this you achieved a higher hashrate? I have the same situation and cannot see any difference on miner page and pool page. Also, please set in your account settings to accept messages from newbies so that I can PM you (Profile->Modify Profile->Personal Message Options)

Looking at the hashrate of each one hashboard is similar despite the fact that VID on chain 1 and 2 is 160

[Utechs]

Has anyone gotten the privileged API access working? I've changed the cgminer.conf to allow it (i.e., "W:0/0"), but the privileged RPC keeps coming back denied. I'm wondering if they compiled a custom version that turned that completely off except for local (i.e., 127.0.0.1) access.
It looks like the framework inside is completely built on RPC privileged access through RPCs to cgminer. But they implemented using bootstrap jss and php. And the formatting of the jss files are NO white space. For a generic, user-friendly interaction, someone what jss and bootstrap knowledge may need to get involved.

Says here: http://www.awesomeminer.com/help/minerapi.aspx that on Innosilicon devices it's disabled, but there's a work around. I haven't looked at it.

I've been running at 1400 and 170. Seems stable and temps are at 50C with fan at 30%. Can't say hash rates are much improved yet. Only been running for about 30 minutes so far.

Hello sir

does 1400 170 hurt the miner or not?

thank you

[Utechs]

I'm mining @ 1500 , 175. No problem if you can cool it tho. ( at least 50% fan speed )

do all chains set to 175 or just chain 0?
and other set to 160

and what is power consuming?

Thank you for your reply

[Utechs]

Looks like there operators are responsible for performance tuning:

--T1efficient       Tune Dragonmint T1 per chain voltage and frequency for optimal efficiency
--T1factory         Tune Dragonmint T1 per chain voltage and frequency by factory autotune strategy
--noauto            Disable Dragonmint T1 per chain auto voltage and frequency tuning
--T1performance     Tune Dragonmint T1 per chain voltage and frequency for maximum performance
--T1Pll1 <arg>      Set PLL Clock in bitmine A1 broad 1 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250)
--T1Pll2 <arg>      Set PLL Clock in bitmine A1 broad 2 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250)
--T1Pll3 <arg>      Set PLL Clock in bitmine A1 broad 3 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250)
--T1Pll4 <arg>      Set PLL Clock in bitmine A1 broad 4 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250)
--T1Pll5 <arg>      Set PLL Clock in bitmine A1 broad 5 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250)
--T1Pll6 <arg>      Set PLL Clock in bitmine A1 broad 6 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250)
--T1Pll7 <arg>      Set PLL Clock in bitmine A1 broad 7 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250)
--T1Pll8 <arg>      Set PLL Clock in bitmine A1 broad 8 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250)
--T1VID1 <arg>      set voltage (1 ~ 255) (default:
--T1VID1 <arg>      set voltage (1 ~ 255) (default: 166)
--T1VID2 <arg>      set voltage (1 ~ 255) (default: 166)
--T1VID3 <arg>      set voltage (1 ~ 255) (default: 166)
--T1VID4 <arg>      set voltage (1 ~ 255) (default: 166)
--T1VID5 <arg>      set voltage (1 ~ 255) (default: 166)
--T1VID6 <arg>      set voltage (1 ~ 255) (default: 166)
--T1VID7 <arg>      set voltage (1 ~ 255) (default: 166)
--T1VID8 <arg>      set voltage (1 ~ 255) (default: 166)
--A1Fanspd <arg>    set fan speed (0 ~ 100) (default: -1)
--A1Fanmode <arg>   set fan control (0 ~ 1) (default: 1)


config located in /config/ folder

part of config file:
    "api-listen": true,
    "api-port": "4028",
    "api-allow": "R:0/0,W:127.0.0.1",
    "T1performance": true,

Hello sir

Do you have any idea why miner only set T1VID1 and other keep them at 160?

[Utechs]

All chains set at 175. ( Latest firmware needed and Factory mode in Performance tab ).

I get 62 Ksol and consume 800 watts. ( depends on Fan speed. for 65% fan speed = 850watts ).

A sample :
   "T1Pll1": "1500",
    "T1Pll2": "1500",
    "T1Pll3": "1500",
    "T1VID1": "175",
    "T1VID2": "175",
    "T1VID3": "175",

thank you sir

I did all of that but in logs all chains' pll change but VID only chain0 change.


^{Mar 19 20:08:04 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz)
Mar 19 20:08:06 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2
Mar 19 20:08:06 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 283(798MHz)
Mar 19 20:08:07 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 170
Mar 19 20:08:13 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 283(798MHz) -> 366(1392MHz)
Mar 19 20:08:16 InnoMiner mcompat_lib[1327]: chain1: set vid 160
Mar 19 20:08:16 InnoMiner mcompat_lib[1327]: chain1: sleep(3)
Mar 19 20:08:24 InnoMiner mcompat_lib[1327]: chain1: error temperature ignored(0): Tmax=21, Tmin=-68, Tavg=-5.8
Mar 19 20:08:24 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz)
Mar 19 20:08:26 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2
Mar 19 20:08:26 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 283(798MHz)
Mar 19 20:08:28 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160
Mar 19 20:08:28 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 283(798MHz) -> 366(1392MHz)
Mar 19 20:08:29 InnoMiner mcompat_lib[1327]: chain1: set tsadc divider
Mar 19 20:08:29 InnoMiner mcompat_lib[1327]: chain1: set spi speed 4
Mar 19 20:08:30 InnoMiner mcompat_lib[1327]: chain2: power down
Mar 19 20:08:31 InnoMiner mcompat_lib[1327]: chain2: set vid 160
Mar 19 20:08:31 InnoMiner mcompat_lib[1327]: chain2: sleep(3)
Mar 19 20:08:34 InnoMiner mcompat_lib[1327]: chain2: encore first mode
Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: detected 12 chips
Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: set tsadc divider
Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: error temperature ignored(0): Tmax=21, Tmin=-146, Tavg=-4.8
Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz)
Mar 19 20:08:41 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2
Mar 19 20:08:41 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 283(798MHz)
Mar 19 20:08:42 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160
Mar 19 20:08:42 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 283(798MHz) -> 366(1392MHz)
Mar 19 20:08:43 InnoMiner mcompat_lib[1327]: chain2: set tsadc divider
Mar 19 20:08:43 InnoMiner mcompat_lib[1327]: chain2: set spi speed 4
Mar 19 20:08:44 InnoMiner mcompat_lib[1327]: chain2: detect finished
Mar 19 20:08:44 InnoMiner mcompat_lib[1327]: chain detect finished. 3 chains detected.}

[Utechs]

All chains set at 175. ( Latest firmware needed and Factory mode in Performance tab ).

I get 62 Ksol and consume 800 watts. ( depends on Fan speed. for 65% fan speed = 850watts ).

A sample :
   "T1Pll1": "1500",
    "T1Pll2": "1500",
    "T1Pll3": "1500",
    "T1VID1": "175",
    "T1VID2": "175",
    "T1VID3": "175",

thank you sir

I did all of that but in logs all chains' pll change but VID only chain0 change.


^{Mar 19 20:08:04 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz)
Mar 19 20:08:06 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2
Mar 19 20:08:06 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 283(798MHz)
Mar 19 20:08:07 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 170
Mar 19 20:08:13 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 283(798MHz) -> 366(1392MHz)
Mar 19 20:08:16 InnoMiner mcompat_lib[1327]: chain1: set vid 160
Mar 19 20:08:16 InnoMiner mcompat_lib[1327]: chain1: sleep(3)
Mar 19 20:08:24 InnoMiner mcompat_lib[1327]: chain1: error temperature ignored(0): Tmax=21, Tmin=-68, Tavg=-5.8
Mar 19 20:08:24 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz)
Mar 19 20:08:26 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2
Mar 19 20:08:26 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 283(798MHz)
Mar 19 20:08:28 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160
Mar 19 20:08:28 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 283(798MHz) -> 366(1392MHz)
Mar 19 20:08:29 InnoMiner mcompat_lib[1327]: chain1: set tsadc divider
Mar 19 20:08:29 InnoMiner mcompat_lib[1327]: chain1: set spi speed 4
Mar 19 20:08:30 InnoMiner mcompat_lib[1327]: chain2: power down
Mar 19 20:08:31 InnoMiner mcompat_lib[1327]: chain2: set vid 160
Mar 19 20:08:31 InnoMiner mcompat_lib[1327]: chain2: sleep(3)
Mar 19 20:08:34 InnoMiner mcompat_lib[1327]: chain2: encore first mode
Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: detected 12 chips
Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: set tsadc divider
Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: error temperature ignored(0): Tmax=21, Tmin=-146, Tavg=-4.8
Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz)
Mar 19 20:08:41 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2
Mar 19 20:08:41 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 283(798MHz)
Mar 19 20:08:42 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160
Mar 19 20:08:42 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 283(798MHz) -> 366(1392MHz)
Mar 19 20:08:43 InnoMiner mcompat_lib[1327]: chain2: set tsadc divider
Mar 19 20:08:43 InnoMiner mcompat_lib[1327]: chain2: set spi speed 4
Mar 19 20:08:44 InnoMiner mcompat_lib[1327]: chain2: detect finished
Mar 19 20:08:44 InnoMiner mcompat_lib[1327]: chain detect finished. 3 chains detected.}

What will be your total hashrate with this numbers ?

flypool
stable 52 max 56 watt 680
and highest PLL accepted 1392 even if I set 1500 system ignore it and set 1392 for PLL

[minefarmbuy]

A9++ released.

[Utechs]

Give me a screenshot these:

1. cgminer.conf
2. Overview tab
3. 192.168.1.xxx/debug

Debug

http://prntscr.com/n0m86a

Cgminer.conf

http://prntscr.com/n0m9ve

Overview

http://prntscr.com/n0ma3t

Thank you again