MZ4
Member
Offline
Activity: 118
Merit: 86
|
|
January 13, 2019, 09:27:42 AM |
|
Thanks for your spreading .yes ,we are akminer and surely we could do overclocking on Innosilicon A9 ,new or used ones both ok ,but it is private not public . Currently some overseas buyers buying used A9 from us and then host in our farm ,our technicians help them do overclocking and they could enjoy the max mining profits . Please be free to contact us if you are interested in this mode . https://www.akminer.com/all-products/used-innosilicon-a9Could you provide us more info about your overclocking software? Stats, Print screens? Do you sell it as a software for A9 owners?
|
|
|
|
RapBTC1
Jr. Member
Offline
Activity: 95
Merit: 1
|
|
January 16, 2019, 11:07:45 AM |
|
Hello, i have big problem with my A9 Zmaster. (I have 5 A9 Zmaster) and since 5 month , every day, one of them be disconnected. I need to restart him (TURN OFF -> TURN ON)
Exemple, Monday its the INNO 3 A9 disconnected, Thursday INNO 5, Wednesday INNO 1 etc....
Impossible to resolve this problem. I have 20 miner from BITMAIN, and i dont have any problem with them.
I use Awesome Miner for manage it.
Thanks
PS : Its not the Pool or PSU
|
Equihash/DCR Discord Disscusion (WITH EFUDD) Discord (https://discord.gg/srNt6py)
|
|
|
Phuripat
Newbie
Offline
Activity: 26
Merit: 2
|
|
January 17, 2019, 04:24:10 AM |
|
|
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
January 19, 2019, 04:14:49 PM |
|
Are you REALLY talking about ROI in the mining !?!?!??!?! It is not right. Mining is aaaaaalllll about hodling. If you sell your mining rewards, you will never ROI ... Mining is not about holding. It can be about: supporting a network. enjoyment through hobby driving profitability as a business Or many other things/reasons to people Holding can be a piece of that and is a viable strategy through a bear market but still though have to pay for power at a minimum and ROI is important for any investment and should be looked at individually from a holding strategy.
|
|
|
|
Poland
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 27, 2019, 11:28:09 AM |
|
|
|
|
|
MZ4
Member
Offline
Activity: 118
Merit: 86
|
|
January 27, 2019, 09:08:43 PM |
|
Where did you find that Overclock?
|
|
|
|
Poland
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 28, 2019, 02:45:14 PM Last edit: January 29, 2019, 10:56:05 AM by Poland |
|
Where did you find that Overclock? Please start reading from page 20
|
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
January 29, 2019, 01:04:08 AM |
|
Where did you find that Overclock?
Seriously
|
|
|
|
JerzyKiler
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 29, 2019, 11:58:28 AM |
|
Regarding overclock, my voltage setting seems to be ignored for chain1 and chain2.
I set the following params in my cgminer.conf:
"noauto": true, "T1Pll1": "1425", "T1Pll2": "1425", "T1Pll3": "1425", "T1VID1": "175", "T1VID2": "175", "T1VID3": "175"
According to the miner logs clock speed is set fine, but the vid is set correctly only for chain0.
Jan 29 11:36:02 InnoMiner mcompat_lib[1327]: chain0: set vid 160 ... Jan 29 11:36:11 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2 Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:14 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 175 Jan 29 11:36:23 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 300(900MHz) -> 368(1416MHz) ... Jan 29 11:36:26 InnoMiner mcompat_lib[1327]: chain1: set vid 160 ... Jan 29 11:36:34 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2 Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160 Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 300(900MHz) -> 368(1416MHz) ... Jan 29 11:36:40 InnoMiner mcompat_lib[1327]: chain2: set vid 160 ... Jan 29 11:36:49 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2 Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160 Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 300(900MHz) -> 368(1416MHz)
Any ideas? What am I doing wrong?
|
|
|
|
Poland
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 29, 2019, 01:17:28 PM |
|
Regarding overclock, my voltage setting seems to be ignored for chain1 and chain2.
I set the following params in my cgminer.conf:
"noauto": true, "T1Pll1": "1425", "T1Pll2": "1425", "T1Pll3": "1425", "T1VID1": "175", "T1VID2": "175", "T1VID3": "175"
According to the miner logs clock speed is set fine, but the vid is set correctly only for chain0.
Jan 29 11:36:02 InnoMiner mcompat_lib[1327]: chain0: set vid 160 ... Jan 29 11:36:11 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2 Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:14 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 175 Jan 29 11:36:23 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 300(900MHz) -> 368(1416MHz) ... Jan 29 11:36:26 InnoMiner mcompat_lib[1327]: chain1: set vid 160 ... Jan 29 11:36:34 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2 Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160 Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 300(900MHz) -> 368(1416MHz) ... Jan 29 11:36:40 InnoMiner mcompat_lib[1327]: chain2: set vid 160 ... Jan 29 11:36:49 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2 Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160 Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 300(900MHz) -> 368(1416MHz)
Any ideas? What am I doing wrong?
I have the same.
|
|
|
|
Poland
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 29, 2019, 03:03:35 PM |
|
Regarding overclock, my voltage setting seems to be ignored for chain1 and chain2.
I set the following params in my cgminer.conf:
"noauto": true, "T1Pll1": "1425", "T1Pll2": "1425", "T1Pll3": "1425", "T1VID1": "175", "T1VID2": "175", "T1VID3": "175"
According to the miner logs clock speed is set fine, but the vid is set correctly only for chain0.
Jan 29 11:36:02 InnoMiner mcompat_lib[1327]: chain0: set vid 160 ... Jan 29 11:36:11 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2 Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:14 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 175 Jan 29 11:36:23 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 300(900MHz) -> 368(1416MHz) ... Jan 29 11:36:26 InnoMiner mcompat_lib[1327]: chain1: set vid 160 ... Jan 29 11:36:34 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2 Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160 Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 300(900MHz) -> 368(1416MHz) ... Jan 29 11:36:40 InnoMiner mcompat_lib[1327]: chain2: set vid 160 ... Jan 29 11:36:49 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2 Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160 Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 300(900MHz) -> 368(1416MHz)
Any ideas? What am I doing wrong?
I have the same. If you use factory settings max VID is 165 chain0,chain1 and chain2 Performance VID 170 chain0,1 and 2 Performance + VID 175 only chain0 but chain1 and chain2 VID 160. Why ??
|
|
|
|
JerzyKiler
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 30, 2019, 11:26:41 AM |
|
Regarding overclock, my voltage setting seems to be ignored for chain1 and chain2.
I set the following params in my cgminer.conf:
"noauto": true, "T1Pll1": "1425", "T1Pll2": "1425", "T1Pll3": "1425", "T1VID1": "175", "T1VID2": "175", "T1VID3": "175"
According to the miner logs clock speed is set fine, but the vid is set correctly only for chain0.
Jan 29 11:36:02 InnoMiner mcompat_lib[1327]: chain0: set vid 160 ... Jan 29 11:36:11 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2 Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:14 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 175 Jan 29 11:36:23 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 300(900MHz) -> 368(1416MHz) ... Jan 29 11:36:26 InnoMiner mcompat_lib[1327]: chain1: set vid 160 ... Jan 29 11:36:34 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2 Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160 Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 300(900MHz) -> 368(1416MHz) ... Jan 29 11:36:40 InnoMiner mcompat_lib[1327]: chain2: set vid 160 ... Jan 29 11:36:49 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2 Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160 Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 300(900MHz) -> 368(1416MHz)
Any ideas? What am I doing wrong?
I have the same. If you use factory settings max VID is 165 chain0,chain1 and chain2 Performance VID 170 chain0,1 and 2 Performance + VID 175 only chain0 but chain1 and chain2 VID 160. Why ?? But despite this you achieved a higher hashrate? I have the same situation and cannot see any difference on miner page and pool page. Also, please set in your account settings to accept messages from newbies so that I can PM you (Profile->Modify Profile->Personal Message Options)
|
|
|
|
Poland
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 30, 2019, 02:44:28 PM |
|
Regarding overclock, my voltage setting seems to be ignored for chain1 and chain2.
I set the following params in my cgminer.conf:
"noauto": true, "T1Pll1": "1425", "T1Pll2": "1425", "T1Pll3": "1425", "T1VID1": "175", "T1VID2": "175", "T1VID3": "175"
According to the miner logs clock speed is set fine, but the vid is set correctly only for chain0.
Jan 29 11:36:02 InnoMiner mcompat_lib[1327]: chain0: set vid 160 ... Jan 29 11:36:11 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2 Jan 29 11:36:12 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:14 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 175 Jan 29 11:36:23 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 300(900MHz) -> 368(1416MHz) ... Jan 29 11:36:26 InnoMiner mcompat_lib[1327]: chain1: set vid 160 ... Jan 29 11:36:34 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2 Jan 29 11:36:36 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160 Jan 29 11:36:38 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 300(900MHz) -> 368(1416MHz) ... Jan 29 11:36:40 InnoMiner mcompat_lib[1327]: chain2: set vid 160 ... Jan 29 11:36:49 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz) Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2 Jan 29 11:36:50 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 300(900MHz) Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160 Jan 29 11:36:52 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 300(900MHz) -> 368(1416MHz)
Any ideas? What am I doing wrong?
I have the same. If you use factory settings max VID is 165 chain0,chain1 and chain2 Performance VID 170 chain0,1 and 2 Performance + VID 175 only chain0 but chain1 and chain2 VID 160. Why ?? But despite this you achieved a higher hashrate? I have the same situation and cannot see any difference on miner page and pool page. Also, please set in your account settings to accept messages from newbies so that I can PM you (Profile->Modify Profile->Personal Message Options) Looking at the hashrate of each one hashboard is similar despite the fact that VID on chain 1 and 2 is 160
|
|
|
|
Utechs
Newbie
Offline
Activity: 14
Merit: 0
|
|
March 18, 2019, 10:24:05 AM |
|
Has anyone gotten the privileged API access working? I've changed the cgminer.conf to allow it (i.e., "W:0/0"), but the privileged RPC keeps coming back denied. I'm wondering if they compiled a custom version that turned that completely off except for local (i.e., 127.0.0.1) access. It looks like the framework inside is completely built on RPC privileged access through RPCs to cgminer. But they implemented using bootstrap jss and php. And the formatting of the jss files are NO white space. For a generic, user-friendly interaction, someone what jss and bootstrap knowledge may need to get involved.
Says here: http://www.awesomeminer.com/help/minerapi.aspx that on Innosilicon devices it's disabled, but there's a work around. I haven't looked at it. I've been running at 1400 and 170. Seems stable and temps are at 50C with fan at 30%. Can't say hash rates are much improved yet. Only been running for about 30 minutes so far. Hello sir does 1400 170 hurt the miner or not? thank you
|
|
|
|
Utechs
Newbie
Offline
Activity: 14
Merit: 0
|
|
March 19, 2019, 10:41:28 AM |
|
I'm mining @ 1500 , 175. No problem if you can cool it tho. ( at least 50% fan speed )
do all chains set to 175 or just chain 0? and other set to 160 and what is power consuming? Thank you for your reply
|
|
|
|
Utechs
Newbie
Offline
Activity: 14
Merit: 0
|
|
March 19, 2019, 06:24:34 PM |
|
Looks like there operators are responsible for performance tuning: --T1efficient Tune Dragonmint T1 per chain voltage and frequency for optimal efficiency --T1factory Tune Dragonmint T1 per chain voltage and frequency by factory autotune strategy --noauto Disable Dragonmint T1 per chain auto voltage and frequency tuning --T1performance Tune Dragonmint T1 per chain voltage and frequency for maximum performance --T1Pll1 <arg> Set PLL Clock in bitmine A1 broad 1 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250) --T1Pll2 <arg> Set PLL Clock in bitmine A1 broad 2 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250) --T1Pll3 <arg> Set PLL Clock in bitmine A1 broad 3 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250) --T1Pll4 <arg> Set PLL Clock in bitmine A1 broad 4 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250) --T1Pll5 <arg> Set PLL Clock in bitmine A1 broad 5 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250) --T1Pll6 <arg> Set PLL Clock in bitmine A1 broad 6 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250) --T1Pll7 <arg> Set PLL Clock in bitmine A1 broad 7 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250) --T1Pll8 <arg> Set PLL Clock in bitmine A1 broad 8 chip (-1: 1000MHz, >0:Look PLL table) (default: 1250) --T1VID1 <arg> set voltage (1 ~ 255) (default: --T1VID1 <arg> set voltage (1 ~ 255) (default: 166) --T1VID2 <arg> set voltage (1 ~ 255) (default: 166) --T1VID3 <arg> set voltage (1 ~ 255) (default: 166) --T1VID4 <arg> set voltage (1 ~ 255) (default: 166) --T1VID5 <arg> set voltage (1 ~ 255) (default: 166) --T1VID6 <arg> set voltage (1 ~ 255) (default: 166) --T1VID7 <arg> set voltage (1 ~ 255) (default: 166) --T1VID8 <arg> set voltage (1 ~ 255) (default: 166) --A1Fanspd <arg> set fan speed (0 ~ 100) (default: -1) --A1Fanmode <arg> set fan control (0 ~ 1) (default: 1) config located in /config/ folder part of config file: "api-listen": true, "api-port": "4028", "api-allow": "R:0/0,W:127.0.0.1", "T1performance": true, Hello sir Do you have any idea why miner only set T1VID1 and other keep them at 160?
|
|
|
|
Utechs
Newbie
Offline
Activity: 14
Merit: 0
|
|
March 19, 2019, 09:07:41 PM Last edit: March 19, 2019, 11:02:08 PM by Utechs |
|
All chains set at 175. ( Latest firmware needed and Factory mode in Performance tab ).
I get 62 Ksol and consume 800 watts. ( depends on Fan speed. for 65% fan speed = 850watts ).
A sample : "T1Pll1": "1500", "T1Pll2": "1500", "T1Pll3": "1500", "T1VID1": "175", "T1VID2": "175", "T1VID3": "175",
thank you sir I did all of that but in logs all chains' pll change but VID only chain0 change. Mar 19 20:08:04 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz) Mar 19 20:08:06 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2 Mar 19 20:08:06 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 283(798MHz) Mar 19 20:08:07 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 170 Mar 19 20:08:13 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 283(798MHz) -> 366(1392MHz) Mar 19 20:08:16 InnoMiner mcompat_lib[1327]: chain1: set vid 160 Mar 19 20:08:16 InnoMiner mcompat_lib[1327]: chain1: sleep(3) Mar 19 20:08:24 InnoMiner mcompat_lib[1327]: chain1: error temperature ignored(0): Tmax=21, Tmin=-68, Tavg=-5.8 Mar 19 20:08:24 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz) Mar 19 20:08:26 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2 Mar 19 20:08:26 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 283(798MHz) Mar 19 20:08:28 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160 Mar 19 20:08:28 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 283(798MHz) -> 366(1392MHz) Mar 19 20:08:29 InnoMiner mcompat_lib[1327]: chain1: set tsadc divider Mar 19 20:08:29 InnoMiner mcompat_lib[1327]: chain1: set spi speed 4 Mar 19 20:08:30 InnoMiner mcompat_lib[1327]: chain2: power down Mar 19 20:08:31 InnoMiner mcompat_lib[1327]: chain2: set vid 160 Mar 19 20:08:31 InnoMiner mcompat_lib[1327]: chain2: sleep(3) Mar 19 20:08:34 InnoMiner mcompat_lib[1327]: chain2: encore first mode Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: detected 12 chips Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: set tsadc divider Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: error temperature ignored(0): Tmax=21, Tmin=-146, Tavg=-4.8 Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz) Mar 19 20:08:41 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2 Mar 19 20:08:41 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 283(798MHz) Mar 19 20:08:42 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160 Mar 19 20:08:42 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 283(798MHz) -> 366(1392MHz) Mar 19 20:08:43 InnoMiner mcompat_lib[1327]: chain2: set tsadc divider Mar 19 20:08:43 InnoMiner mcompat_lib[1327]: chain2: set spi speed 4 Mar 19 20:08:44 InnoMiner mcompat_lib[1327]: chain2: detect finished Mar 19 20:08:44 InnoMiner mcompat_lib[1327]: chain detect finished. 3 chains detected.
|
|
|
|
Utechs
Newbie
Offline
Activity: 14
Merit: 0
|
|
March 20, 2019, 03:24:50 PM |
|
All chains set at 175. ( Latest firmware needed and Factory mode in Performance tab ).
I get 62 Ksol and consume 800 watts. ( depends on Fan speed. for 65% fan speed = 850watts ).
A sample : "T1Pll1": "1500", "T1Pll2": "1500", "T1Pll3": "1500", "T1VID1": "175", "T1VID2": "175", "T1VID3": "175",
thank you sir I did all of that but in logs all chains' pll change but VID only chain0 change. Mar 19 20:08:04 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 0(30MHz) -> 150(300MHz) Mar 19 20:08:06 InnoMiner mcompat_lib[1327]: chain0: set spi speed 2 Mar 19 20:08:06 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 150(300MHz) -> 283(798MHz) Mar 19 20:08:07 InnoMiner mcompat_lib[1327]: chain0: set vid 160 -> 170 Mar 19 20:08:13 InnoMiner mcompat_lib[1327]: chain0: chip0 set pll 283(798MHz) -> 366(1392MHz) Mar 19 20:08:16 InnoMiner mcompat_lib[1327]: chain1: set vid 160 Mar 19 20:08:16 InnoMiner mcompat_lib[1327]: chain1: sleep(3) Mar 19 20:08:24 InnoMiner mcompat_lib[1327]: chain1: error temperature ignored(0): Tmax=21, Tmin=-68, Tavg=-5.8 Mar 19 20:08:24 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 0(30MHz) -> 150(300MHz) Mar 19 20:08:26 InnoMiner mcompat_lib[1327]: chain1: set spi speed 2 Mar 19 20:08:26 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 150(300MHz) -> 283(798MHz) Mar 19 20:08:28 InnoMiner mcompat_lib[1327]: chain1: set vid 160 -> 160 Mar 19 20:08:28 InnoMiner mcompat_lib[1327]: chain1: chip0 set pll 283(798MHz) -> 366(1392MHz) Mar 19 20:08:29 InnoMiner mcompat_lib[1327]: chain1: set tsadc divider Mar 19 20:08:29 InnoMiner mcompat_lib[1327]: chain1: set spi speed 4 Mar 19 20:08:30 InnoMiner mcompat_lib[1327]: chain2: power down Mar 19 20:08:31 InnoMiner mcompat_lib[1327]: chain2: set vid 160 Mar 19 20:08:31 InnoMiner mcompat_lib[1327]: chain2: sleep(3) Mar 19 20:08:34 InnoMiner mcompat_lib[1327]: chain2: encore first mode Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: detected 12 chips Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: set tsadc divider Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: error temperature ignored(0): Tmax=21, Tmin=-146, Tavg=-4.8 Mar 19 20:08:39 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 0(30MHz) -> 150(300MHz) Mar 19 20:08:41 InnoMiner mcompat_lib[1327]: chain2: set spi speed 2 Mar 19 20:08:41 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 150(300MHz) -> 283(798MHz) Mar 19 20:08:42 InnoMiner mcompat_lib[1327]: chain2: set vid 160 -> 160 Mar 19 20:08:42 InnoMiner mcompat_lib[1327]: chain2: chip0 set pll 283(798MHz) -> 366(1392MHz) Mar 19 20:08:43 InnoMiner mcompat_lib[1327]: chain2: set tsadc divider Mar 19 20:08:43 InnoMiner mcompat_lib[1327]: chain2: set spi speed 4 Mar 19 20:08:44 InnoMiner mcompat_lib[1327]: chain2: detect finished Mar 19 20:08:44 InnoMiner mcompat_lib[1327]: chain detect finished. 3 chains detected.
What will be your total hashrate with this numbers ? flypool stable 52 max 56 watt 680 and highest PLL accepted 1392 even if I set 1500 system ignore it and set 1392 for PLL
|
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
March 20, 2019, 05:55:01 PM |
|
A9++ released.
|
|
|
|
|
|