Innosilicon releases A9 Zmaster 50ksol/s Equihash miner at 620W

[Gedaskv]

I'm using nicehash, but with only 2 GPU. it's  running about 50 usd per day. Hash rate not very stable.

[xpulse]

I'm using nicehash, but with only 2 GPU. it's  running about 50 usd per day. Hash rate not very stable.

2 GPU's? or miners?

I'm concerning about contant disconnects for pool. The session from miner is not longer than 5-15 minutes.

[Gedaskv]

2 Hasplates(2 GPU), because one is broken and I send it out to innosilicon.

[Gedaskv]

Can somebody help and put in the youtube video, how to change fan speed to coold down hashcards. I think hashrate should increase then. Because afer insertion to cnf file it's get's back to automatic settings.
Thank you very much in advance.

[xpulse]

2 Hasplates(2 GPU), because one is broken and I send it out to innosilicon.

In Active workers statistic page how long your miner still connected?

[Gedaskv]

2,4 h.

[xpulse]

2,4 h.

Oh wow... do you using USA or EU server in config, which firmware you are running?

[Gedaskv]

EU

[wKiV7378U]

if miner resets to defaults after editing config file, you probably have a typo somewhere.

can you tell me what kind of hash rate fluctuations you get?  here is what mine look like after 15hrs runtime using 1350PLL and VID 170:

https://imgur.com/4FVy3Yj

(zencash @ suprnova)

I feel like hash rates fluctuate more now...even though temps are colder.  I dont really see a boost in performance.

[Andartis]

if miner resets to defaults after editing config file, you probably have a typo somewhere.

can you tell me what kind of hash rate fluctuations you get?  here is what mine look like after 15hrs runtime using 1350PLL and VID 170:

https://imgur.com/4FVy3Yj

(zencash @ suprnova)

I feel like hash rates fluctuate more now...even though temps are colder.  I dont really see a boost in performance.

Seems the same with mine.
You should look at the total daily income from your pool and dont care so much about that graph.

[Gedaskv]

"you probably have a typo somewhere", Maybe you can share the screenshot with commands lines, how to change it properly? To decrease the temperatures?
Thank you in advance.

Can somebody check what I'm doing wrong?

https://imgur.com/zwOFLvI
https://imgur.com/EYqUGNF
https://imgur.com/6ZZS9LT
https://imgur.com/LgSynuH

[koy168hk]

How are people's HW error rates?  What is considered normal?  Looking at Innosilicon's Miner Status page, my HW #'s seem to be around 5-10% of my "Accepted" #.  

I am running on Balanced performance profile, and have latest firmware installed.  If this is not normal are there any suggestions to lower my HW errors?  Could it possibly vary based on the pool I am mining on (currently on Flypool)?  Thanks in advance.

Just FYI, today's 7/20 firmware release seems to have fixed all my HW error issues.  I am not getting them anymore.  

I could not manage to update the firmware. After correct seeming update it reboots and has still old firmware.

Weird, I just checked and I'm also having the same problem.  My previous installed firmware was from 07/18.  But after installing today's 07/20 firmware, it is now saying I have 07/06 firmware installed... I'm guessing they will push out a new firmware to fix this soon.

I ask inno tech guys today already.
They reply me that 6July firmware is as same as 20July firmware.
They just re-upload it on 20July, so the name being changed.

[Gedaskv]

if miner resets to defaults after editing config file, you probably have a typo somewhere.

can you tell me what kind of hash rate fluctuations you get?  here is what mine look like after 15hrs runtime using 1350PLL and VID 170:

https://imgur.com/4FVy3Yj

(zencash @ suprnova)

I feel like hash rates fluctuate more now...even though temps are colder.  I dont really see a boost in performance.

Seems the same with mine.
You should look at the total daily income from your pool and dont care so much about that graph.

What do you mean have a "typo somewhere"?
Can somebody please share a screenshot or quick video how to change fan speed up to 30% and not reset to default after reboot.

[TrueCryptoMiner]

When I open the config file all I see is the pool and api listen. It doesnt show me anything about fanspeed or PLL

[Gedaskv]

For me not showing api listening...
just those:
https://imgur.com/zwOFLvI
https://imgur.com/EYqUGNF
https://imgur.com/6ZZS9LT
https://imgur.com/LgSynuH

Please help me to cool down the miner.

[xpulse]

For me not showing api listening...
just those:
https://imgur.com/zwOFLvI
https://imgur.com/EYqUGNF
https://imgur.com/6ZZS9LT
https://imgur.com/LgSynuH

Please help me to cool down the miner.

Add these lines in your config:

    "noauto": true,
    "T1Pll1": "1250",
    "T1Pll2": "1250",
    "T1Pll3": "1250",
    "T1VID1": "166",
    "T1VID2": "166",
    "T1VID3": "166",
    "A1Fanspd": "50",
    "A1Fanmode": "0"

[Gedaskv]

thanks for quick reply.
I have this issue then trying to enter to config file.
What I should do with this swap file?
https://imgur.com/wqAi9ZS
Thanks in advance.

[EK701]

thanks for quick reply.
I have this issue then trying to enter to config file.
What I should do with this swap file?
https://imgur.com/wqAi9ZS
Thanks in advance.

You can ignore this error.

After you edit the cgminer.conf file, you need to type:

systemctl restart cgminer

That will restart the miner program and it should use the new cgminer.conf settings.

[katsapliasR]

does anybody know the json path for the api?

There are two locations. One that gets copied down after reboot and another that is the currently working copy:

/usr/share/factory/var/www/webif/api

/var/www/webif/api

This is where all of the PHP and CSS files are.

thanks!

[Gedaskv]

It's not letting to save changes.
https://imgur.com/VjDOORQ
when I enter :wq!

Also not working comand for system control to save chages.

https://imgur.com/VjDOORQ
https://imgur.com/6xwnW60

what I'm doing wrong?